samba/sme10/smb.conf.default

# This is the main Samba configuration file. For detailed information about the
# options listed here, refer to the smb.conf(5) manual page. Samba has a huge
# number of configurable options, most of which are not shown in this example.
#
# The Official Samba 3.2.x HOWTO and Reference Guide contains step-by-step
# guides for installing, configuring, and using Samba:
# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
#
# The Samba-3 by Example guide has working examples for smb.conf. This guide is
# generated daily: http://www.samba.org/samba/docs/Samba-Guide.pdf
#
# In this file, lines starting with a semicolon (;) or a hash (#) are
# comments and are ignored. This file uses hashes to denote commentary and
# semicolons for parts of the file you may wish to configure.
#
# Note: Run the "testparm" command after modifying this file to check for basic
# syntax errors.
#
#---------------
# Security-Enhanced Linux (SELinux) Notes:
#
# Turn the samba_domain_controller Boolean on to allow Samba to use the useradd
# and groupadd family of binaries. Run the following command as the root user to
# turn this Boolean on:
# setsebool -P samba_domain_controller on
#
# Turn the samba_enable_home_dirs Boolean on if you want to share home
# directories via Samba. Run the following command as the root user to turn this
# Boolean on:
# setsebool -P samba_enable_home_dirs on
#
# If you create a new directory, such as a new top-level directory, label it
# with samba_share_t so that SELinux allows Samba to read and write to it. Do
# not label system directories, such as /etc/ and /home/, with samba_share_t, as
# such directories should already have an SELinux label.
#
# Run the "ls -ldZ /path/to/directory" command to view the current SELinux
# label for a given directory.
#
# Set SELinux labels only on files and directories you have created. Use the
# chcon command to temporarily change a label:
# chcon -t samba_share_t /path/to/directory
#
# Changes made via chcon are lost when the file system is relabeled or commands
# such as restorecon are run.
#
# Use the samba_export_all_ro or samba_export_all_rw Boolean to share system
# directories. To share such directories and only allow read-only permissions:
# setsebool -P samba_export_all_ro on
# To share such directories and allow read and write permissions:
# setsebool -P samba_export_all_rw on
#
# To run scripts (preexec/root prexec/print command/...), copy them to the
# /var/lib/samba/scripts/ directory so that SELinux will allow smbd to run them.
# Note that if you move the scripts to /var/lib/samba/scripts/, they retain
# their existing SELinux labels, which may be labels that SELinux does not allow
# smbd to run. Copying the scripts will result in the correct SELinux labels.
# Run the "restorecon -R -v /var/lib/samba/scripts" command as the root user to
# apply the correct SELinux labels to these files.
#
#--------------
#
#======================= Global Settings =====================================

[global]

# ----------------------- Network-Related Options -------------------------
#
# workgroup = the Windows NT domain name or workgroup name, for example, MYGROUP.
#
# server string = the equivalent of the Windows NT Description field.
#
# netbios name = used to specify a server name that is not tied to the hostname.
#
# interfaces = used to configure Samba to listen on multiple network interfaces.
# If you have multiple interfaces, you can use the "interfaces =" option to
# configure which of those interfaces Samba listens on. Never omit the localhost
# interface (lo).
#
# hosts allow = the hosts allowed to connect. This option can also be used on a
# per-share basis.
#
# hosts deny = the hosts not allowed to connect. This option can also be used on
# a per-share basis.
#
# max protocol = used to define the supported protocol. The default is NT1. You
# can set it to SMB2 if you want experimental SMB2 support.
#
        workgroup = MYGROUP
        server string = Samba Server Version %v

;       netbios name = MYSERVER

;       interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24
;       hosts allow = 127. 192.168.12. 192.168.13.

;       max protocol = SMB2

# --------------------------- Logging Options -----------------------------
#
# log file = specify where log files are written to and how they are split.
#
# max log size = specify the maximum size log files are allowed to reach. Log
# files are rotated when they reach the size specified with "max log size".
#

        # log files split per-machine:
        log file = /var/log/samba/log.%m
        # maximum size of 50KB per log file, then rotate:
        max log size = 50

# ----------------------- Standalone Server Options ------------------------
#
# security = the mode Samba runs in. This can be set to user, share
# (deprecated), or server (deprecated).
#
# passdb backend = the backend used to store user information in. New
# installations should use either tdbsam or ldapsam. No additional configuration
# is required for tdbsam. The "smbpasswd" utility is available for backwards
# compatibility.
#

        security = user
        passdb backend = tdbsam


# ----------------------- Domain Members Options ------------------------
#
# security = must be set to domain or ads.
#
# passdb backend = the backend used to store user information in. New
# installations should use either tdbsam or ldapsam. No additional configuration
# is required for tdbsam. The "smbpasswd" utility is available for backwards
# compatibility.
#
# realm = only use the realm option when the "security = ads" option is set.
# The realm option specifies the Active Directory realm the host is a part of.
#
# password server = only use this option when the "security = server"
# option is set, or if you cannot use DNS to locate a Domain Controller. The
# argument list can include My_PDC_Name, [My_BDC_Name], and [My_Next_BDC_Name]:
#
# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
#
# Use "password server = *" to automatically locate Domain Controllers.

;       security = domain
;       passdb backend = tdbsam
;       realm = MY_REALM

;       password server = <NT-Server-Name>

# ----------------------- Domain Controller Options ------------------------
#
# security = must be set to user for domain controllers.
#
# passdb backend = the backend used to store user information in. New
# installations should use either tdbsam or ldapsam. No additional configuration
# is required for tdbsam. The "smbpasswd" utility is available for backwards
# compatibility.
#
# domain master = specifies Samba to be the Domain Master Browser, allowing
# Samba to collate browse lists between subnets. Do not use the "domain master"
# option if you already have a Windows NT domain controller performing this task.
#
# domain logons = allows Samba to provide a network logon service for Windows
# workstations.
#
# logon script = specifies a script to run at login time on the client. These
# scripts must be provided in a share named NETLOGON.
#
# logon path = specifies (with a UNC path) where user profiles are stored.
#
#
;       security = user
;       passdb backend = tdbsam

;       domain master = yes
;       domain logons = yes

        # the following login script name is determined by the machine name
        # (%m):
;       logon script = %m.bat
        # the following login script name is determined by the UNIX user used:
;       logon script = %u.bat
;       logon path = \\%L\Profiles\%u
        # use an empty path to disable profile support:
;       logon path =

        # various scripts can be used on a domain controller or a stand-alone
        # machine to add or delete corresponding UNIX accounts:

;       add user script = /usr/sbin/useradd "%u" -n -g users
;       add group script = /usr/sbin/groupadd "%g"
;       add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M -d /nohome -s /bin/false "%u"
;       delete user script = /usr/sbin/userdel "%u"
;       delete user from group script = /usr/sbin/userdel "%u" "%g"
;       delete group script = /usr/sbin/groupdel "%g"


# ----------------------- Browser Control Options ----------------------------
#
# local master = when set to no, Samba does not become the master browser on
# your network. When set to yes, normal election rules apply.
#
# os level = determines the precedence the server has in master browser
# elections. The default value should be reasonable.
#
# preferred master = when set to yes, Samba forces a local browser election at
# start up (and gives itself a slightly higher chance of winning the election).
#
;       local master = no
;       os level = 33
;       preferred master = yes

#----------------------------- Name Resolution -------------------------------
#
# This section details the support for the Windows Internet Name Service (WINS).
#
# Note: Samba can be either a WINS server or a WINS client, but not both.
#
# wins support = when set to yes, the NMBD component of Samba enables its WINS
# server.
#
# wins server = tells the NMBD component of Samba to be a WINS client.
#
# wins proxy = when set to yes, Samba answers name resolution queries on behalf
# of a non WINS capable client. For this to work, there must be at least one
# WINS server on the network. The default is no.
#
# dns proxy = when set to yes, Samba attempts to resolve NetBIOS names via DNS
# nslookups.

;       wins support = yes
;       wins server = w.x.y.z
;       wins proxy = yes

;       dns proxy = yes

# --------------------------- Printing Options -----------------------------
#
# The options in this section allow you to configure a non-default printing
# system.
#
# load printers = when set you yes, the list of printers is automatically
# loaded, rather than setting them up individually.
#
# cups options = allows you to pass options to the CUPS library. Setting this
# option to raw, for example, allows you to use drivers on your Windows clients.
#
# printcap name = used to specify an alternative printcap file.
#

        load printers = yes
        cups options = raw

;       printcap name = /etc/printcap
        # obtain a list of printers automatically on UNIX System V systems:
;       printcap name = lpstat
;       printing = cups

# --------------------------- File System Options ---------------------------
#
# The options in this section can be un-commented if the file system supports
# extended attributes, and those attributes are enabled (usually via the
# "user_xattr" mount option). These options allow the administrator to specify
# that DOS attributes are stored in extended attributes and also make sure that
# Samba does not change the permission bits.
#
# Note: These options can be used on a per-share basis. Setting them globally
# (in the [global] section) makes them the default for all shares.

;       map archive = no
;       map hidden = no
;       map read only = no
;       map system = no
;       store dos attributes = yes


#============================ Share Definitions ==============================

[homes]
        comment = Home Directories
        browseable = no
        writable = yes
;       valid users = %S
;       valid users = MYDOMAIN\%S

[printers]
        comment = All Printers
        path = /var/spool/samba
        browseable = no
        guest ok = no
        writable = no
        printable = yes

# Un-comment the following and create the netlogon directory for Domain Logons:
;       [netlogon]
;       comment = Network Logon Service
;       path = /var/lib/samba/netlogon
;       guest ok = yes
;       writable = no
;       share modes = no

# Un-comment the following to provide a specific roving profile share.
# The default is to use the user's home directory:
;       [Profiles]
;       path = /var/lib/samba/profiles
;       browseable = no
;       guest ok = yes

# A publicly accessible directory that is read only, except for users in the
# "staff" group (which have write permissions):
;       [public]
;       comment = Public Stuff
;       path = /home/samba
;       public = yes
;       writable = yes
;       printable = no
;       write list = +staff
1	vip-ire	1.1	# This is the main Samba configuration file. For detailed information about the
2			# options listed here, refer to the smb.conf(5) manual page. Samba has a huge
3			# number of configurable options, most of which are not shown in this example.
4			#
5			# The Official Samba 3.2.x HOWTO and Reference Guide contains step-by-step
6			# guides for installing, configuring, and using Samba:
7			# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
8			#
9			# The Samba-3 by Example guide has working examples for smb.conf. This guide is
10			# generated daily: http://www.samba.org/samba/docs/Samba-Guide.pdf
11			#
12			# In this file, lines starting with a semicolon (;) or a hash (#) are
13			# comments and are ignored. This file uses hashes to denote commentary and
14			# semicolons for parts of the file you may wish to configure.
15			#
16			# Note: Run the "testparm" command after modifying this file to check for basic
17			# syntax errors.
18			#
19			#---------------
20			# Security-Enhanced Linux (SELinux) Notes:
21			#
22			# Turn the samba_domain_controller Boolean on to allow Samba to use the useradd
23			# and groupadd family of binaries. Run the following command as the root user to
24			# turn this Boolean on:
25			# setsebool -P samba_domain_controller on
26			#
27			# Turn the samba_enable_home_dirs Boolean on if you want to share home
28			# directories via Samba. Run the following command as the root user to turn this
29			# Boolean on:
30			# setsebool -P samba_enable_home_dirs on
31			#
32			# If you create a new directory, such as a new top-level directory, label it
33			# with samba_share_t so that SELinux allows Samba to read and write to it. Do
34			# not label system directories, such as /etc/ and /home/, with samba_share_t, as
35			# such directories should already have an SELinux label.
36			#
37			# Run the "ls -ldZ /path/to/directory" command to view the current SELinux
38			# label for a given directory.
39			#
40			# Set SELinux labels only on files and directories you have created. Use the
41			# chcon command to temporarily change a label:
42			# chcon -t samba_share_t /path/to/directory
43			#
44			# Changes made via chcon are lost when the file system is relabeled or commands
45			# such as restorecon are run.
46			#
47			# Use the samba_export_all_ro or samba_export_all_rw Boolean to share system
48			# directories. To share such directories and only allow read-only permissions:
49			# setsebool -P samba_export_all_ro on
50			# To share such directories and allow read and write permissions:
51			# setsebool -P samba_export_all_rw on
52			#
53			# To run scripts (preexec/root prexec/print command/...), copy them to the
54			# /var/lib/samba/scripts/ directory so that SELinux will allow smbd to run them.
55			# Note that if you move the scripts to /var/lib/samba/scripts/, they retain
56			# their existing SELinux labels, which may be labels that SELinux does not allow
57			# smbd to run. Copying the scripts will result in the correct SELinux labels.
58			# Run the "restorecon -R -v /var/lib/samba/scripts" command as the root user to
59			# apply the correct SELinux labels to these files.
60			#
61			#--------------
62			#
63			#======================= Global Settings =====================================
64
65			[global]
66
67			# ----------------------- Network-Related Options -------------------------
68			#
69			# workgroup = the Windows NT domain name or workgroup name, for example, MYGROUP.
70			#
71			# server string = the equivalent of the Windows NT Description field.
72			#
73			# netbios name = used to specify a server name that is not tied to the hostname.
74			#
75			# interfaces = used to configure Samba to listen on multiple network interfaces.
76			# If you have multiple interfaces, you can use the "interfaces =" option to
77			# configure which of those interfaces Samba listens on. Never omit the localhost
78			# interface (lo).
79			#
80			# hosts allow = the hosts allowed to connect. This option can also be used on a
81			# per-share basis.
82			#
83			# hosts deny = the hosts not allowed to connect. This option can also be used on
84			# a per-share basis.
85			#
86			# max protocol = used to define the supported protocol. The default is NT1. You
87			# can set it to SMB2 if you want experimental SMB2 support.
88			#
89			workgroup = MYGROUP
90			server string = Samba Server Version %v
91
92			; netbios name = MYSERVER
93
94			; interfaces = lo eth0 192.168.12.2/24 192.168.13.2/24
95			; hosts allow = 127. 192.168.12. 192.168.13.
96
97			; max protocol = SMB2
98
99			# --------------------------- Logging Options -----------------------------
100			#
101			# log file = specify where log files are written to and how they are split.
102			#
103			# max log size = specify the maximum size log files are allowed to reach. Log
104			# files are rotated when they reach the size specified with "max log size".
105			#
106
107			# log files split per-machine:
108			log file = /var/log/samba/log.%m
109			# maximum size of 50KB per log file, then rotate:
110			max log size = 50
111
112			# ----------------------- Standalone Server Options ------------------------
113			#
114			# security = the mode Samba runs in. This can be set to user, share
115			# (deprecated), or server (deprecated).
116			#
117			# passdb backend = the backend used to store user information in. New
118			# installations should use either tdbsam or ldapsam. No additional configuration
119			# is required for tdbsam. The "smbpasswd" utility is available for backwards
120			# compatibility.
121			#
122
123			security = user
124			passdb backend = tdbsam
125
126
127			# ----------------------- Domain Members Options ------------------------
128			#
129			# security = must be set to domain or ads.
130			#
131			# passdb backend = the backend used to store user information in. New
132			# installations should use either tdbsam or ldapsam. No additional configuration
133			# is required for tdbsam. The "smbpasswd" utility is available for backwards
134			# compatibility.
135			#
136			# realm = only use the realm option when the "security = ads" option is set.
137			# The realm option specifies the Active Directory realm the host is a part of.
138			#
139			# password server = only use this option when the "security = server"
140			# option is set, or if you cannot use DNS to locate a Domain Controller. The
141			# argument list can include My_PDC_Name, [My_BDC_Name], and [My_Next_BDC_Name]:
142			#
143			# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
144			#
145			# Use "password server = *" to automatically locate Domain Controllers.
146
147			; security = domain
148			; passdb backend = tdbsam
149			; realm = MY_REALM
150
151			; password server = <NT-Server-Name>
152
153			# ----------------------- Domain Controller Options ------------------------
154			#
155			# security = must be set to user for domain controllers.
156			#
157			# passdb backend = the backend used to store user information in. New
158			# installations should use either tdbsam or ldapsam. No additional configuration
159			# is required for tdbsam. The "smbpasswd" utility is available for backwards
160			# compatibility.
161			#
162			# domain master = specifies Samba to be the Domain Master Browser, allowing
163			# Samba to collate browse lists between subnets. Do not use the "domain master"
164			# option if you already have a Windows NT domain controller performing this task.
165			#
166			# domain logons = allows Samba to provide a network logon service for Windows
167			# workstations.
168			#
169			# logon script = specifies a script to run at login time on the client. These
170			# scripts must be provided in a share named NETLOGON.
171			#
172			# logon path = specifies (with a UNC path) where user profiles are stored.
173			#
174			#
175			; security = user
176			; passdb backend = tdbsam
177
178			; domain master = yes
179			; domain logons = yes
180
181			# the following login script name is determined by the machine name
182			# (%m):
183			; logon script = %m.bat
184			# the following login script name is determined by the UNIX user used:
185			; logon script = %u.bat
186			; logon path = \\%L\Profiles\%u
187			# use an empty path to disable profile support:
188			; logon path =
189
190			# various scripts can be used on a domain controller or a stand-alone
191			# machine to add or delete corresponding UNIX accounts:
192
193			; add user script = /usr/sbin/useradd "%u" -n -g users
194			; add group script = /usr/sbin/groupadd "%g"
195			; add machine script = /usr/sbin/useradd -n -c "Workstation (%u)" -M -d /nohome -s /bin/false "%u"
196			; delete user script = /usr/sbin/userdel "%u"
197			; delete user from group script = /usr/sbin/userdel "%u" "%g"
198			; delete group script = /usr/sbin/groupdel "%g"
199
200
201			# ----------------------- Browser Control Options ----------------------------
202			#
203			# local master = when set to no, Samba does not become the master browser on
204			# your network. When set to yes, normal election rules apply.
205			#
206			# os level = determines the precedence the server has in master browser
207			# elections. The default value should be reasonable.
208			#
209			# preferred master = when set to yes, Samba forces a local browser election at
210			# start up (and gives itself a slightly higher chance of winning the election).
211			#
212			; local master = no
213			; os level = 33
214			; preferred master = yes
215
216			#----------------------------- Name Resolution -------------------------------
217			#
218			# This section details the support for the Windows Internet Name Service (WINS).
219			#
220			# Note: Samba can be either a WINS server or a WINS client, but not both.
221			#
222			# wins support = when set to yes, the NMBD component of Samba enables its WINS
223			# server.
224			#
225			# wins server = tells the NMBD component of Samba to be a WINS client.
226			#
227			# wins proxy = when set to yes, Samba answers name resolution queries on behalf
228			# of a non WINS capable client. For this to work, there must be at least one
229			# WINS server on the network. The default is no.
230			#
231			# dns proxy = when set to yes, Samba attempts to resolve NetBIOS names via DNS
232			# nslookups.
233
234			; wins support = yes
235			; wins server = w.x.y.z
236			; wins proxy = yes
237
238			; dns proxy = yes
239
240			# --------------------------- Printing Options -----------------------------
241			#
242			# The options in this section allow you to configure a non-default printing
243			# system.
244			#
245			# load printers = when set you yes, the list of printers is automatically
246			# loaded, rather than setting them up individually.
247			#
248			# cups options = allows you to pass options to the CUPS library. Setting this
249			# option to raw, for example, allows you to use drivers on your Windows clients.
250			#
251			# printcap name = used to specify an alternative printcap file.
252			#
253
254			load printers = yes
255			cups options = raw
256
257			; printcap name = /etc/printcap
258			# obtain a list of printers automatically on UNIX System V systems:
259			; printcap name = lpstat
260			; printing = cups
261
262			# --------------------------- File System Options ---------------------------
263			#
264			# The options in this section can be un-commented if the file system supports
265			# extended attributes, and those attributes are enabled (usually via the
266			# "user_xattr" mount option). These options allow the administrator to specify
267			# that DOS attributes are stored in extended attributes and also make sure that
268			# Samba does not change the permission bits.
269			#
270			# Note: These options can be used on a per-share basis. Setting them globally
271			# (in the [global] section) makes them the default for all shares.
272
273			; map archive = no
274			; map hidden = no
275			; map read only = no
276			; map system = no
277			; store dos attributes = yes
278
279
280			#============================ Share Definitions ==============================
281
282			[homes]
283			comment = Home Directories
284			browseable = no
285			writable = yes
286			; valid users = %S
287			; valid users = MYDOMAIN\%S
288
289			[printers]
290			comment = All Printers
291			path = /var/spool/samba
292			browseable = no
293			guest ok = no
294			writable = no
295			printable = yes
296
297			# Un-comment the following and create the netlogon directory for Domain Logons:
298			; [netlogon]
299			; comment = Network Logon Service
300			; path = /var/lib/samba/netlogon
301			; guest ok = yes
302			; writable = no
303			; share modes = no
304
305			# Un-comment the following to provide a specific roving profile share.
306			# The default is to use the user's home directory:
307			; [Profiles]
308			; path = /var/lib/samba/profiles
309			; browseable = no
310			; guest ok = yes
311
312			# A publicly accessible directory that is read only, except for users in the
313			# "staff" group (which have write permissions):
314			; [public]
315			; comment = Public Stuff
316			; path = /home/samba
317			; public = yes
318			; writable = yes
319			; printable = no
320			; write list = +staff