samba/sme8/smb.conf.default

# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options (perhaps too
# many!) most of which are not shown in this example
#
# For a step to step guide on installing, configuring and using samba, 
# read the Samba-HOWTO-Collection. This may be obtained from:
#  http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
#
# Many working examples of smb.conf files can be found in the 
# Samba-Guide which is generated daily and can be downloaded from: 
#  http://www.samba.org/samba/docs/Samba-Guide.pdf
#
# Any line which starts with a ; (semi-colon) or a # (hash) 
# is a comment and is ignored. In this example we will use a #
# for commentry and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command "testparm"
# to check that you have not made any basic syntactic errors. 
#
#======================= Global Settings =====================================
[global]

# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
   workgroup = MYGROUP

# server string is the equivalent of the NT Description field
   server string = Samba Server

# Security mode. Defines in which mode Samba will operate. Possible 
# values are share, user, server, domain and ads. Most people will want 
# user level security. See the Samba-HOWTO-Collection for details.
   security = user

# This option is important for security. It allows you to restrict
# connections to machines which are on your local network. The
# following example restricts access to two C class networks and
# the "loopback" interface. For more examples of the syntax see
# the smb.conf man page
;   hosts allow = 192.168.1. 192.168.2. 127.

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
   load printers = yes

# you may wish to override the location of the printcap file
;   printcap name = /etc/printcap

# on SystemV system setting printcap name to lpstat should allow
# you to automatically obtain a printer list from the SystemV spool
# system
;   printcap name = lpstat

# It should not be necessary to specify the print system type unless
# it is non-standard. Currently supported print systems include:
# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
;   printing = cups

# Uncomment this if you want a guest account, you must add this to /etc/passwd
# otherwise the user "nobody" is used
;  guest account = pcguest

# this tells Samba to use a separate log file for each machine
# that connects
   log file = /usr/local/samba/var/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 50

# Use password server option only with security = server
# The argument list may include:
#   password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
# or to auto-locate the domain controller/s
#   password server = *
;   password server = <NT-Server-Name>

# Use the realm option only with security = ads
# Specifies the Active Directory realm the host is part of
;   realm = MY_REALM

# Backend to store user information in. New installations should 
# use either tdbsam or ldapsam. smbpasswd is available for backwards 
# compatibility. tdbsam requires no further configuration.
;   passdb backend = tdbsam

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting.
# Note: Consider carefully the location in the configuration file of
#       this line.  The included file is read at that point.
;   include = /usr/local/samba/lib/smb.conf.%m

# Configure Samba to use multiple interfaces
# If you have multiple network interfaces then you must list them
# here. See the man page for details.
;   interfaces = 192.168.12.2/24 192.168.13.2/24 

# Browser Control Options:
# set local master to no if you don't want Samba to become a master
# browser on your network. Otherwise the normal election rules apply
;   local master = no

# OS Level determines the precedence of this server in master browser
# elections. The default value should be reasonable
;   os level = 33

# Domain Master specifies Samba to be the Domain Master Browser. This
# allows Samba to collate browse lists between subnets. Don't use this
# if you already have a Windows NT domain controller doing this job
;   domain master = yes 

# Preferred Master causes Samba to force a local browser election on startup
# and gives it a slightly higher chance of winning the election
;   preferred master = yes

# Enable this if you want Samba to be a domain logon server for 
# Windows95 workstations. 
;   domain logons = yes

# if you enable domain logons then you may want a per-machine or
# per user logon script
# run a specific logon batch file per workstation (machine)
;   logon script = %m.bat
# run a specific logon batch file per username
;   logon script = %U.bat

# Where to store roving profiles (only for Win95 and WinNT)
#        %L substitutes for this servers netbios name, %U is username
#        You must uncomment the [Profiles] share below
;   logon path = \\%L\Profiles\%U

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
;   wins support = yes

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
#       Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# WINS Proxy - Tells Samba to answer name resolution queries on
# behalf of a non WINS capable client, for this to work there must be
# at least one  WINS Server on the network. The default is NO.
;   wins proxy = yes

# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
# via DNS nslookups. The default is NO.
   dns proxy = no 

# These scripts are used on a domain controller or stand-alone 
# machine to add or delete corresponding unix accounts
;  add user script = /usr/sbin/useradd %u
;  add group script = /usr/sbin/groupadd %g
;  add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
;  delete user script = /usr/sbin/userdel %u
;  delete user from group script = /usr/sbin/deluser %u %g
;  delete group script = /usr/sbin/groupdel %g


#============================ Share Definitions ==============================
[homes]
   comment = Home Directories
   browseable = no
   writable = yes

# Un-comment the following and create the netlogon directory for Domain Logons
; [netlogon]
;   comment = Network Logon Service
;   path = /usr/local/samba/lib/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no


# Un-comment the following to provide a specific roving profile share
# the default is to use the user's home directory
;[Profiles]
;    path = /usr/local/samba/profiles
;    browseable = no
;    guest ok = yes


# NOTE: If you have a BSD-style print system there is no need to 
# specifically define each individual printer
[printers]
   comment = All Printers
   path = /usr/spool/samba
   browseable = no
# Set public = yes to allow user 'guest account' to print
   guest ok = no
   writable = no
   printable = yes

# This one is useful for people to share files
;[tmp]
;   comment = Temporary file space
;   path = /tmp
;   read only = no
;   public = yes

# A publicly accessible directory, but read only, except for people in
# the "staff" group
;[public]
;   comment = Public Stuff
;   path = /home/samba
;   public = yes
;   writable = yes
;   printable = no
;   write list = @staff

# Other examples. 
#
# A private printer, usable only by fred. Spool data will be placed in fred's
# home directory. Note that fred must have write access to the spool directory,
# wherever it is.
;[fredsprn]
;   comment = Fred's Printer
;   valid users = fred
;   path = /homes/fred
;   printer = freds_printer
;   public = no
;   writable = no
;   printable = yes

# A private directory, usable only by fred. Note that fred requires write
# access to the directory.
;[fredsdir]
;   comment = Fred's Service
;   path = /usr/somewhere/private
;   valid users = fred
;   public = no
;   writable = yes
;   printable = no

# a service which has a different directory for each machine that connects
# this allows you to tailor configurations to incoming machines. You could
# also use the %U option to tailor it by user name.
# The %m gets replaced with the machine name that is connecting.
;[pchome]
;  comment = PC Directories
;  path = /usr/pc/%m
;  public = no
;  writable = yes

# A publicly accessible directory, read/write to all users. Note that all files
# created in the directory by users will be owned by the default user, so
# any user with access can delete any other user's files. Obviously this
# directory must be writable by the default user. Another user could of course
# be specified, in which case all files would be owned by that user instead.
;[public]
;   path = /usr/somewhere/else/public
;   public = yes
;   only guest = yes
;   writable = yes
;   printable = no

# The following two entries demonstrate how to share a directory so that two
# users can place files there that will be owned by the specific users. In this
# setup, the directory should be writable by both users and should have the
# sticky bit set on it to prevent abuse. Obviously this could be extended to
# as many users as required.
;[myshare]
;   comment = Mary's and Fred's stuff
;   path = /usr/somewhere/shared
;   valid users = mary fred
;   public = no
;   writable = yes
;   printable = no
;   create mask = 0765


1	# This is the main Samba configuration file. You should read the
2	# smb.conf(5) manual page in order to understand the options listed
3	# here. Samba has a huge number of configurable options (perhaps too
4	# many!) most of which are not shown in this example
5	#
6	# For a step to step guide on installing, configuring and using samba,
7	# read the Samba-HOWTO-Collection. This may be obtained from:
8	# http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
9	#
10	# Many working examples of smb.conf files can be found in the
11	# Samba-Guide which is generated daily and can be downloaded from:
12	# http://www.samba.org/samba/docs/Samba-Guide.pdf
13	#
14	# Any line which starts with a ; (semi-colon) or a # (hash)
15	# is a comment and is ignored. In this example we will use a #
16	# for commentry and a ; for parts of the config file that you
17	# may wish to enable
18	#
19	# NOTE: Whenever you modify this file you should run the command "testparm"
20	# to check that you have not made any basic syntactic errors.
21	#
22	#======================= Global Settings =====================================
23	[global]
24
25	# workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
26	workgroup = MYGROUP
27
28	# server string is the equivalent of the NT Description field
29	server string = Samba Server
30
31	# Security mode. Defines in which mode Samba will operate. Possible
32	# values are share, user, server, domain and ads. Most people will want
33	# user level security. See the Samba-HOWTO-Collection for details.
34	security = user
35
36	# This option is important for security. It allows you to restrict
37	# connections to machines which are on your local network. The
38	# following example restricts access to two C class networks and
39	# the "loopback" interface. For more examples of the syntax see
40	# the smb.conf man page
41	; hosts allow = 192.168.1. 192.168.2. 127.
42
43	# If you want to automatically load your printer list rather
44	# than setting them up individually then you'll need this
45	load printers = yes
46
47	# you may wish to override the location of the printcap file
48	; printcap name = /etc/printcap
49
50	# on SystemV system setting printcap name to lpstat should allow
51	# you to automatically obtain a printer list from the SystemV spool
52	# system
53	; printcap name = lpstat
54
55	# It should not be necessary to specify the print system type unless
56	# it is non-standard. Currently supported print systems include:
57	# bsd, cups, sysv, plp, lprng, aix, hpux, qnx
58	; printing = cups
59
60	# Uncomment this if you want a guest account, you must add this to /etc/passwd
61	# otherwise the user "nobody" is used
62	; guest account = pcguest
63
64	# this tells Samba to use a separate log file for each machine
65	# that connects
66	log file = /usr/local/samba/var/log.%m
67
68	# Put a capping on the size of the log files (in Kb).
69	max log size = 50
70
71	# Use password server option only with security = server
72	# The argument list may include:
73	# password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
74	# or to auto-locate the domain controller/s
75	# password server = *
76	; password server = <NT-Server-Name>
77
78	# Use the realm option only with security = ads
79	# Specifies the Active Directory realm the host is part of
80	; realm = MY_REALM
81
82	# Backend to store user information in. New installations should
83	# use either tdbsam or ldapsam. smbpasswd is available for backwards
84	# compatibility. tdbsam requires no further configuration.
85	; passdb backend = tdbsam
86
87	# Using the following line enables you to customise your configuration
88	# on a per machine basis. The %m gets replaced with the netbios name
89	# of the machine that is connecting.
90	# Note: Consider carefully the location in the configuration file of
91	# this line. The included file is read at that point.
92	; include = /usr/local/samba/lib/smb.conf.%m
93
94	# Configure Samba to use multiple interfaces
95	# If you have multiple network interfaces then you must list them
96	# here. See the man page for details.
97	; interfaces = 192.168.12.2/24 192.168.13.2/24
98
99	# Browser Control Options:
100	# set local master to no if you don't want Samba to become a master
101	# browser on your network. Otherwise the normal election rules apply
102	; local master = no
103
104	# OS Level determines the precedence of this server in master browser
105	# elections. The default value should be reasonable
106	; os level = 33
107
108	# Domain Master specifies Samba to be the Domain Master Browser. This
109	# allows Samba to collate browse lists between subnets. Don't use this
110	# if you already have a Windows NT domain controller doing this job
111	; domain master = yes
112
113	# Preferred Master causes Samba to force a local browser election on startup
114	# and gives it a slightly higher chance of winning the election
115	; preferred master = yes
116
117	# Enable this if you want Samba to be a domain logon server for
118	# Windows95 workstations.
119	; domain logons = yes
120
121	# if you enable domain logons then you may want a per-machine or
122	# per user logon script
123	# run a specific logon batch file per workstation (machine)
124	; logon script = %m.bat
125	# run a specific logon batch file per username
126	; logon script = %U.bat
127
128	# Where to store roving profiles (only for Win95 and WinNT)
129	# %L substitutes for this servers netbios name, %U is username
130	# You must uncomment the [Profiles] share below
131	; logon path = \\%L\Profiles\%U
132
133	# Windows Internet Name Serving Support Section:
134	# WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
135	; wins support = yes
136
137	# WINS Server - Tells the NMBD components of Samba to be a WINS Client
138	# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
139	; wins server = w.x.y.z
140
141	# WINS Proxy - Tells Samba to answer name resolution queries on
142	# behalf of a non WINS capable client, for this to work there must be
143	# at least one WINS Server on the network. The default is NO.
144	; wins proxy = yes
145
146	# DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
147	# via DNS nslookups. The default is NO.
148	dns proxy = no
149
150	# These scripts are used on a domain controller or stand-alone
151	# machine to add or delete corresponding unix accounts
152	; add user script = /usr/sbin/useradd %u
153	; add group script = /usr/sbin/groupadd %g
154	; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
155	; delete user script = /usr/sbin/userdel %u
156	; delete user from group script = /usr/sbin/deluser %u %g
157	; delete group script = /usr/sbin/groupdel %g
158
159
160	#============================ Share Definitions ==============================
161	[homes]
162	comment = Home Directories
163	browseable = no
164	writable = yes
165
166	# Un-comment the following and create the netlogon directory for Domain Logons
167	; [netlogon]
168	; comment = Network Logon Service
169	; path = /usr/local/samba/lib/netlogon
170	; guest ok = yes
171	; writable = no
172	; share modes = no
173
174
175	# Un-comment the following to provide a specific roving profile share
176	# the default is to use the user's home directory
177	;[Profiles]
178	; path = /usr/local/samba/profiles
179	; browseable = no
180	; guest ok = yes
181
182
183	# NOTE: If you have a BSD-style print system there is no need to
184	# specifically define each individual printer
185	[printers]
186	comment = All Printers
187	path = /usr/spool/samba
188	browseable = no
189	# Set public = yes to allow user 'guest account' to print
190	guest ok = no
191	writable = no
192	printable = yes
193
194	# This one is useful for people to share files
195	;[tmp]
196	; comment = Temporary file space
197	; path = /tmp
198	; read only = no
199	; public = yes
200
201	# A publicly accessible directory, but read only, except for people in
202	# the "staff" group
203	;[public]
204	; comment = Public Stuff
205	; path = /home/samba
206	; public = yes
207	; writable = yes
208	; printable = no
209	; write list = @staff
210
211	# Other examples.
212	#
213	# A private printer, usable only by fred. Spool data will be placed in fred's
214	# home directory. Note that fred must have write access to the spool directory,
215	# wherever it is.
216	;[fredsprn]
217	; comment = Fred's Printer
218	; valid users = fred
219	; path = /homes/fred
220	; printer = freds_printer
221	; public = no
222	; writable = no
223	; printable = yes
224
225	# A private directory, usable only by fred. Note that fred requires write
226	# access to the directory.
227	;[fredsdir]
228	; comment = Fred's Service
229	; path = /usr/somewhere/private
230	; valid users = fred
231	; public = no
232	; writable = yes
233	; printable = no
234
235	# a service which has a different directory for each machine that connects
236	# this allows you to tailor configurations to incoming machines. You could
237	# also use the %U option to tailor it by user name.
238	# The %m gets replaced with the machine name that is connecting.
239	;[pchome]
240	; comment = PC Directories
241	; path = /usr/pc/%m
242	; public = no
243	; writable = yes
244
245	# A publicly accessible directory, read/write to all users. Note that all files
246	# created in the directory by users will be owned by the default user, so
247	# any user with access can delete any other user's files. Obviously this
248	# directory must be writable by the default user. Another user could of course
249	# be specified, in which case all files would be owned by that user instead.
250	;[public]
251	; path = /usr/somewhere/else/public
252	; public = yes
253	; only guest = yes
254	; writable = yes
255	; printable = no
256
257	# The following two entries demonstrate how to share a directory so that two
258	# users can place files there that will be owned by the specific users. In this
259	# setup, the directory should be writable by both users and should have the
260	# sticky bit set on it to prevent abuse. Obviously this could be extended to
261	# as many users as required.
262	;[myshare]
263	; comment = Mary's and Fred's stuff
264	; path = /usr/somewhere/shared
265	; valid users = mary fred
266	; public = no
267	; writable = yes
268	; printable = no
269	; create mask = 0765
270
271