smeserver-locale/sme7/smeserver-locale-2.0.0-locale-2008-10-13.patch

--- smeserver-locale-2.0.0/root/etc/e-smith/locale/id/etc/e-smith/web/functions/domains 2008-10-07 09:26:51.000000000 -0600
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/id/etc/e-smith/web/functions/domains  2008-10-13 00:23:00.000000000 -0600
@@ -57,27 +57,27 @@
     </entry>
     <entry>
         <base>NONEXISTENT_DOMAIN_ERROR</base>
-        <trans>Error: {$domainName} is not an existing domain.</trans>
+        <trans>Error: {$domainName} tidak ada.</trans>
     </entry>
     <entry>
         <base>SUCCESSFULLY_MODIFIED</base>
-        <trans>Successfully modified domain {$domainName}. Your web server is now being restarted. The links on this page will be inactive until the web server restart is complete.</trans>
+        <trans>Sukses mengubah domain {$domainName}. Web server sedang di-restart. Link di halaman ini akan akan nonaktif sampai prosest restart web server selesai.</trans>
     </entry>
     <entry>
         <base>REMOVE_TITLE</base>
-        <trans>Remove domain</trans>
+        <trans>Hapus domain</trans>
     </entry>
     <entry>
         <base>REMOVE_DESCRIPTION</base>
-        <trans><![CDATA[ <p> You are about to remove the domain {$domain} ({$domainDesc}). </p> <p> <b>Are you sure you wish to remove this domain?</b> </p> ]]></trans>
+        <trans><![CDATA[ <p> Anda akan menghapusdomain {$domain} ({$domainDesc}). </p> <p> <b>Anda yakin menghapus domain ini?</b> </p> ]]></trans>
     </entry>
     <entry>
         <base>ERROR_WHILE_REMOVING_DOMAIN</base>
-        <trans>Error: internal failure while removing domain {$domain}.</trans>
+        <trans>Error: gagal saat menghapus domain {$domain}.</trans>
     </entry>
     <entry>
         <base>SUCCESSFULLY_DELETED</base>
-        <trans>Successfully deleted domain {$domain}. Your web server is now being restarted. The links on this page will be inactive until the web server restart is complete.</trans>
+        <trans>Sukses menghapus domain {$domain}. Web server anda sedang di-restart. Link pada halaman ini akan nonaktif sampai proses restart web server selesai.</trans>
     </entry>
 
     <entry>
@@ -87,22 +87,22 @@
 
     <entry>
         <base>BUTTON_CORPORATE_DNS</base>
-        <trans><![CDATA[ <p>If this server does not have access to the Internet, or you have special requirements for DNS resolution, enter the DNS server IP address here. You should not enter the address of your ISP's DNS servers here, as the server is capable of resolving all Internet DNS names without this additional configuration.</p> <p> <a class="button-like" href="domains?page=0&page_stack=&Next=Next&wherenext=DOMAINS_PAGE_CORPORATE_DNS">Modify corporate DNS settings</a> ]]></trans>
+        <trans><![CDATA[ <p>Jika server ini tidak memiliki akses keInternet, atau jika anda memiliki aturan khusus untuk resolusi DNS, masukkan alamat IP DNS server disini. Jangan isikan DNS servers ISP anda disini, karena server dapat mencari semua nama DNS Internet tanpa konfigurasi tambahan ini.</p> <p> <a class="button-like" href="domains?page=0&page_stack=&Next=Next&wherenext=DOMAINS_PAGE_CORPORATE_DNS">Ubah pengaturan DNS korporat</a> ]]></trans>
     </entry>
 
     <entry>
         <base>DESC_CORPORATE_DNS</base>
-        <trans>If this server does not have access to the Internet, or you have special requirements for DNS resolution, enter the DNS server IP addresses here. These fields should be left blank unless you have a specific reason to configure other DNS servers. You should not enter the address of your ISP's DNS servers here, as the server is capable of resolving all Internet DNS names without this additional configuration.</trans>
+        <trans>Jika server ini tidak memiliki akses keInternet, atau jika anda memiliki aturan khusus untuk resolusi DNS, masukkan alamat IP DNS server disini. Kosongkan Field tersebut kecuali anda memiliki alasan khusus untuk mengkonfigurasi server DNS lain. Jangan isikan DNS servers ISP anda disini, karena server dapat mencari semua nama DNS Internet tanpa konfigurasi tambahan ini.</trans>
     </entry>
 
     <entry>
         <base>LABEL_CORPORATE_DNS_PRIMARY</base>
-        <trans>Primary corporate DNS server</trans>
+        <trans>DNS server primer korporat </trans>
     </entry>
 
     <entry>
         <base>LABEL_CORPORATE_DNS_SECONDARY</base>
-        <trans>Secondary corporate DNS server</trans>
+        <trans>DNS server sekunder korporat </trans>
     </entry>
 
     <entry>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/id/etc/e-smith/web/functions/ibays   2008-10-07 09:26:50.000000000 -0600
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/id/etc/e-smith/web/functions/ibays    2008-10-13 00:23:43.000000000 -0600
@@ -1,107 +1,107 @@
 <lexicon lang="id" params="getExtraParams()">
     <entry>
         <base>FORM_TITLE</base>
-        <trans>Create, modify, or remove i-bays</trans>
+        <trans>Buat, ubah atau hapus i-bay.</trans>
     </entry>
     <entry>
         <base>FIRSTPAGE_DESC</base>
-        <trans><![CDATA[ <p> <a class="button-like" href="ibays?page=0&page_stack=&Next=Next&wherenext=CreateModify">Add i-bay</a> </p> <p> You can remove any information bay or reset its password by clicking on the corresponding command next to the information bay. If the information bay shows up in red, that means that the password has not yet been changed from the default, and should be changed soon. </p> ]]></trans>
+        <trans><![CDATA[ <p> <a class="button-like" href="ibays?page=0&page_stack=&Next=Next&wherenext=CreateModify">Buat i-bay</a> </p> <p> Anda dapat menghapus information bay atau me-reset password-nya dengan meng-klik pada command yang ada di sebelah information bay. Jika warna information bay adalah merah, itu berarti password belum diubah dari default, dan harus diubah secepatnya. </p> ]]></trans>
     </entry>
     <entry>
         <base>ADD_TITLE</base>
-        <trans>Create or modify an i-bay</trans>
+        <trans>Buat atau mengubah i-bay.</trans>
     </entry>
     <entry>
         <base>NAME_FIELD_DESC</base>
-        <trans>The information bay name should contain only lower-case letters, numbers, periods, hyphens and underscores, and should start with a lower-case letter. For example "johnson", "intra", and "cust3.prj12" are all valid names, but "3associates", "John Smith" and "Bus!Partner" are not. The name is limited to {$maxLength} characters.</trans>
+        <trans>Nama information bay hanya boleh berisi huruf kecil, angka, titik, min (hyphen), dan garis bawah (underscore), dan harus dimulai dengan huruf kecil. Contoh yang benar :"johnson","intra" dan "cust3.prj12". Sedangkan "3associates","John Smith" dan "Bus!Partner" adalah salah. Panjang nama dibatasi {$maxLength} karakter.</trans>
     </entry>
     <entry>
         <base>NAME_LABEL</base>
-        <trans>Information bay name</trans>
+        <trans>Nama Information Bay</trans>
     </entry>
     <entry>
         <base>USER_ACCESS</base>
-        <trans>User access via file sharing or user ftp</trans>
+        <trans>Akses pengguna melalui file sharing atau pengguna ftp</trans>
     </entry>
     <entry>
         <base>PUBLIC_ACCESS</base>
-        <trans>Public access via web or anonymous ftp</trans>
+        <trans>Akses umum melalui web atau ftp anonim</trans>
     </entry>
     <entry>
         <base>PUBLIC_ACCESS_DESCRIPTION</base>
-        <trans>The public access mode "password required outside local network" is not supported by the FTP server component. If you select this mode, the FTP server will require a password both inside and outside the local network for this i-bay.</trans>
+        <trans>Mode akses publik "password diperlukan diluar jaringan lokal" tidak didukung oleh komponen FTP server. Jika anda memilih mode ini, , server FTP server akan diperlukan password baik didalam maupun diluar jaringan lokal untuk i-bay ini.</trans>
     </entry>
     <entry>
         <base>ALLOW_DYNAMIC_CONTENT</base>
-        <trans>Execution of dynamic content (CGI, PHP, SSI)</trans>
+        <trans>Jalankan konten dinamis (CGI, PHP, SSI)</trans>
     </entry>
     <entry>
         <base>REMOVE_TITLE</base>
-        <trans>Remove information bay</trans>
+        <trans>Hapus information bay</trans>
     </entry>
     <entry>
         <base>REMOVE_DESC</base>
-        <trans><![CDATA[ <p> You are about to remove the information bay "{$name}" ({$description}). </p> <p> All files belonging to this information bay will be deleted. </p> <p> Are you sure you wish to remove this information bay? </p> ]]></trans>
+        <trans><![CDATA[ <p> Anda akan manghapus information bay "{$name}" ({$description}). </p> <p> Semua file pada information bay ini akan dihapus. </p> <p> Anda yakin menghapus information bay ini? </p> ]]></trans>
     </entry>
     <entry>
         <base>ERROR_WHILE_CREATING_IBAY</base>
-        <trans>An error occurred while creating the i-bay.</trans>
+        <trans>Error saat membuat i-bay</trans>
     </entry>
     <entry>
         <base>SUCCESSFULLY_CREATED_IBAY</base>
-        <trans>Successfully created i-bay.</trans>
+        <trans>Berhasil membuat i-bay.</trans>
     </entry>
     <entry>
         <base>NO_IBAYS</base>
-        <trans>There are no i-bays currently configured.</trans>
+        <trans>Tidak ada i-bay yang dikonfigurasi saat ini.</trans>
     </entry>
     <entry>
         <base>CANT_FIND_IBAY</base>
-        <trans>Can't find account for {$name} (does it exist?)</trans>
+        <trans>Tidak ditemukan akun {$name} (apakah benar ada?)</trans>
     </entry>
     <entry>
         <base>CANT_CREATE_IBAY</base>
-        <trans>Can't create new account for {$name} (does it already exist?)</trans>
+        <trans>Tak dapat membuat akun baru dengan nama {$name} (apakah nama tsb sudah ada?)</trans>
     </entry>
     <entry>
         <base>ERROR_WHILE_MODIFYING_IBAY</base>
-        <trans>An error occurred while modifying the i-bay.</trans>
+        <trans>Error saat mengubah i-bay.</trans>
     </entry>
     <entry>
         <base>SUCCESSFULLY_MODIFIED_IBAY</base>
-        <trans>Successfully modified i-bay.</trans>
+        <trans>Berhasil mengubah i-bay.</trans>
     </entry>
     <entry>
         <base>VIRTUAL_HOST_MESSAGE</base>
-        <trans><![CDATA[ <p>The following virtual domains were using this information bay as their content and will be changed to the primary web site (you can change them to something else afterward):</p> <ul>{$vhostList}</ul> ]]></trans>
+        <trans><![CDATA[ <p>Virtual domain berikut ini menggunakan information bay ini sebagai konten dan akan diubah ke primary web (anda dapat mengubahnya kelak):</p> <ul>{$vhostList}</ul> ]]></trans>
     </entry>
     <entry>
         <base>SUCCESSFULLY_DELETED_IBAY</base>
-        <trans>Successfully deleted i-bay.</trans>
+        <trans>Berhasil menghapus i-bay.</trans>
     </entry>
     <entry>
         <base>ERROR_WHILE_DELETING_IBAY</base>
-        <trans>An error occurred while deleting the i-bay.</trans>
+        <trans>Error saat menghapus i-bay.</trans>
     </entry>
     <entry>
         <base>PASSWORD_DESC</base>
-        <trans>You are about to change the password for the i-bay {$name}.</trans>
+        <trans>Anda akan mengubah password i-bay {$name}.</trans>
     </entry>
     <entry>
         <base>IBAY_PASSWD_VALIDATION_ERROR</base>
-        <trans>The password may contain only letters and numbers.</trans>
+        <trans>Password hanya boleh berisi huruf dan angka.</trans>
     </entry>
     <entry>
         <base>IBAY_PASSWD_VERIFY_ERROR</base>
-        <trans>The passwords do not match.</trans>
+        <trans>Password tidak sama.</trans>
     </entry>
     <entry>
         <base>SUCCESSFULLY_RESET_PASSWORD</base>
-        <trans>Successfully reset password.</trans>
+        <trans>Berhasil mengubah password.</trans>
     </entry>
     <entry>
         <base>ERROR_WHILE_RESETTING_PASSWORD</base>
-        <trans>Error while resetting password.</trans>
+        <trans>Error saat mengubah password.</trans>
     </entry>
     <entry>
         <base>VHOST_MESSAGE</base>
@@ -125,46 +125,46 @@
     </entry>
     <entry>
         <base>NONE</base>
-        <trans>No access</trans>
+        <trans>Tanpa akses</trans>
     </entry>
     <entry>
         <base>LOCAL_NETWORK_NO_PASSWORD</base>
-        <trans>Local network (no password required)</trans>
+        <trans>Jaringan lokal (tidak perlu password)</trans>
     </entry>
     <entry>
         <base>LOCAL_NETWORK_PASSWORD</base>
-        <trans>Local network (password required)</trans>
+        <trans>Jaringan lokal (password diperlukan)</trans>
     </entry>
     <entry>
         <base>ENTIRE_INTERNET_NO_PASSWORD</base>
-        <trans>Entire Internet (no password required)</trans>
+        <trans>Seluruh Internet (tidak perlu password)</trans>
     </entry>
     <entry>
         <base>ENTIRE_INTERNET_PASSWORD</base>
-        <trans>Entire Internet (password required)</trans>
+        <trans>Seluruh Internet (password diperlukan)</trans>
     </entry>
     <entry>
         <base>ENTIRE_INTERNET_PASSWORD_REMOTE</base>
-        <trans>Entire Internet (password required outside local network)</trans>
+        <trans>Seluruh password (password diperlukan diluar jaringan lokal)</trans>
     </entry>
     <entry>
         <base>INVALID_IBAY_DESCRIPTION</base>
-        <trans>Error: unexpected or missing characters in i-bay description</trans>
+        <trans>Error: karakter tak diharapkan atau hilang pada keterangan i-bay</trans>
     </entry>
     <entry>
         <base>ACCT_NAME_HAS_INVALID_CHARS</base>
-        <trans>The i-bay name "{$acctName}" contains invalid characters. I-bay names must start with a lower case letter and contain only lower case letters, numbers, and hyphens.</trans>
+        <trans>Nama i-bay  "{$acctName}" mengandung karakter yang tidak dibolehkan. Nama I-bay harus dimulai dengan huruf kecil dan hanya mengandung huruf kecil, angka, dan hyphen (tanda minus).</trans>
     </entry>
     <entry>
         <base>MAX_IBAY_NAME_LENGTH_ERROR</base>
-        <trans>The i-bay name "{$name}" is too long. The maximum is {$maxIbayNameLength} characters.</trans>
+        <trans>Nama i-bay "{$name}" terlalu panjang. Maksimum adalah {$maxIbayNameLength} karakter.</trans>
     </entry>
     <entry>
         <base>ACCT_CLASHES_WITH_PSEUDONYM</base>
-        <trans><![CDATA[ The account "{$acctName}" clashes with pseudonym details for {$acctType} account "{$acct}". <p>{$acctName} is a pseudonym for {$acct}.</p> ]]></trans>
+        <trans><![CDATA[ Akun "{$acctName}" bentrok dengan detail pseudonym untuk {$acctType} akun "{$acct}". <p>{$acctName} adalah pseudonym untuk {$acct}.</p> ]]></trans>
     </entry>
     <entry>
         <base>ACCOUNT_EXISTS</base>
-        <trans>The account "{$acctName}" is an existing {$acctType} account.</trans>
+        <trans>Akun "{$acctName}" adalah akun  {$acctType} yang telah ada.</trans>
     </entry>
 </lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/FormMagick/general        1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/FormMagick/general 2008-10-13 00:23:22.000000000 -0600
@@ -0,0 +1,512 @@
+<lexicon lang="ja">
+    <!-- vim: ft=xml:
+    -->
+    <entry>
+        <base>Collaboration</base>
+        <trans>Collaboration</trans>
+    </entry>
+    <entry>
+      <base>Administration</base>
+      <trans>Administration</trans>
+    </entry>
+    <entry>
+        <base>Security</base>
+        <trans>Security</trans>
+    </entry>
+    <entry>
+        <base>Configuration</base>
+        <trans>Configuration</trans>
+    </entry>
+    <entry>
+        <base>Miscellaneous</base>
+        <trans>Miscellaneous</trans>
+    </entry>
+    <entry>
+        <base>Your Settings</base>
+        <trans>Your Settings</trans>
+    </entry>
+    <entry>
+        <base>SAVE</base>
+        <trans>Save</trans>
+    </entry>
+    <entry>
+        <base>CANCEL</base>
+        <trans>Cancel</trans>
+    </entry>
+    <entry>
+        <base>ENABLED</base>
+        <trans>Enabled</trans>
+    </entry>
+    <entry>
+        <base>DISABLED</base>
+        <trans>Disabled</trans>
+    </entry>
+    <entry>
+        <base>NO</base>
+        <trans>いいえ</trans>
+    </entry>
+    <entry>
+        <base>YES</base>
+        <trans>はい</trans>
+    </entry>
+    <entry>
+        <base>ADD</base>
+        <trans>Add</trans>
+    </entry>
+    <entry>
+        <base>CREATE</base>
+        <trans>Create</trans>
+    </entry>
+    <entry>
+        <base>MODIFY</base>
+        <trans>Modify</trans>
+    </entry>
+    <entry>
+        <base>REMOVE</base>
+        <trans>削除</trans>
+    </entry>
+    <entry>
+        <base>COMMENT</base>
+        <trans>Comment</trans>
+    </entry>
+    <entry>
+        <base>NEXT</base>
+        <trans>Next</trans>
+    </entry>
+    <entry>
+        <base>SELF</base>
+        <trans>Self</trans>
+    </entry>
+    <entry>
+        <base>REMOTE</base>
+        <trans>Remote</trans>
+    </entry>
+    <entry>
+        <base>LOCAL</base>
+        <trans>Local</trans>
+    </entry>
+    <entry>
+        <base>ACTION</base>
+        <trans>Action</trans>
+    </entry>
+    <entry>
+        <base>NETWORK</base>
+        <trans>Network</trans>
+    </entry>
+    <entry>
+        <base>ROUTER</base>
+        <trans>Router</trans>
+    </entry>
+    <entry>
+        <base>OPERATION_STATUS_REPORT</base>
+        <trans>Operation status report</trans>
+    </entry>
+    <entry>
+        <base>ACCOUNT</base>
+        <trans>Account</trans>
+    </entry>
+    <entry>
+        <base>GROUP</base>
+        <trans>Group</trans>
+    </entry>
+    <entry>
+        <base>DESC_SECTIONBAR</base>
+        <trans><![CDATA[ <hr class="sectionbar"/> ]]></trans>
+    </entry>
+    <entry>
+        <base>NO_PIPES_ALLOWED</base>
+        <trans>Pipe symbols (|) are not permitted in this field</trans>
+    </entry>
+    <entry>
+        <base>ERROR_BELOW</base>
+        <trans>ERROR: There was an error in the validation of this page. Please scroll down and find the specific problem.</trans>
+    </entry>
+    <entry>
+        <base>ACCESS</base>
+        <trans>Access</trans>
+    </entry>
+    <entry>
+        <base>ACCOUNT_LOCKED</base>
+        <trans>Account is locked</trans>
+    </entry>
+    <entry>
+        <base>GROUP_ADD</base>
+        <trans>Add group</trans>
+    </entry>
+    <entry>
+        <base>NETWORKS_ALLOW_LOCAL</base>
+        <trans>Allow access only from local networks</trans>
+    </entry>
+    <entry>
+        <base>NETWORKS_ALLOW_PUBLIC</base>
+        <trans>Allow public access (entire Internet)</trans>
+    </entry>
+    <entry>
+        <base>ERROR_PASSWORD_CHANGE</base>
+        <trans>An error occurred while attempting to change your password. Please make sure that the old password entered is correct.</trans>
+    </entry>
+    <entry>
+        <base>BACK</base>
+        <trans>戻る</trans>
+    </entry>
+    <entry>
+        <base>BACKUP</base>
+        <trans>Backup</trans>
+    </entry>
+    <entry>
+        <base>DESCRIPTION_BRIEF</base>
+        <trans>Brief description</trans>
+    </entry>
+    <entry>
+        <base>PASSWORD_CHANGE</base>
+        <trans>Change Password</trans>
+    </entry>
+    <entry>
+        <base>RESET_PASSWORD_TITLE</base>
+        <trans>Reset user password</trans>
+    </entry>
+    <entry>
+        <base>ACCOUNT_PASSWORD_CHANGE</base>
+        <trans>Change account password</trans>
+    </entry>
+    <entry>
+        <base>CONTENT</base>
+        <trans>Content</trans>
+    </entry>
+    <entry>
+        <base>CREATE_GROUP</base>
+        <trans>Create user group</trans>
+    </entry>
+    <entry>
+        <base>USER_LIST_CURRENT</base>
+        <trans>Current list of users</trans>
+    </entry>
+    <entry>
+        <base>DESCRIPTION</base>
+        <trans>説明</trans>
+    </entry>
+    <entry>
+        <base>DESTINATION</base>
+        <trans>Destination</trans>
+    </entry>
+    <entry>
+        <base>DOMAIN_NAME</base>
+        <trans>Domain name</trans>
+    </entry>
+    <entry>
+        <base>DOMAIN</base>
+        <trans>Domain</trans>
+    </entry>
+    <entry>
+        <base>DOMAINS</base>
+        <trans>Domains</trans>
+    </entry>
+    <entry>
+        <base>DOWNLOAD</base>
+        <trans>Download</trans>
+    </entry>
+    <entry>
+        <base>ERROR_UPDATING_CONFIGURATION</base>
+        <trans>Error occurred while updating system configuration.</trans>
+    </entry>
+    <entry>
+        <base>GROUP_MEMBERS</base>
+        <trans>Group Members</trans>
+    </entry>
+    <entry>
+        <base>GROUP_NAME</base>
+        <trans>Group Name</trans>
+    </entry>
+    <entry>
+        <base>GROUPS</base>
+        <trans>Groups</trans>
+    </entry>
+    <entry>
+        <base>IP_ADDRESS</base>
+        <trans>IP Address</trans>
+    </entry>
+    <entry>
+        <base>USER_INVALID</base>
+        <trans>Invalid user</trans>
+    </entry>
+    <entry>
+        <base>LOCATION</base>
+        <trans>Location</trans>
+    </entry>
+    <entry>
+        <base>MB</base>
+        <trans>Mb</trans>
+    </entry>
+    <entry>
+        <base>MODIFY_USER_GROUP</base>
+        <trans>Modify user group</trans>
+    </entry>
+    <entry>
+        <base>NAME</base>
+        <trans>氏名</trans>
+    </entry>
+    <entry>
+        <base>PASSWORD_VERIFY_NEW</base>
+        <trans>New password (verify):</trans>
+    </entry>
+    <entry>
+        <base>PASSWORD_NEW</base>
+        <trans>New password:</trans>
+    </entry>
+    <entry>
+        <base>OFF</base>
+        <trans>Off</trans>
+    </entry>
+    <entry>
+        <base>OK</base>
+        <trans>Ok</trans>
+    </entry>
+    <entry>
+        <base>PASSWORD_OLD</base>
+        <trans>Old password:</trans>
+    </entry>
+    <entry>
+        <base>ON</base>
+        <trans>On</trans>
+    </entry>
+    <entry>
+        <base>PASSWORD</base>
+        <trans>パスワード</trans>
+    </entry>
+    <entry>
+        <base>PERFORM</base>
+        <trans>Perform</trans>
+    </entry>
+    <entry>
+        <base>RECONFIGURE</base>
+        <trans>Reconfigure</trans>
+    </entry>
+    <entry>
+        <base>REMOVE_USER_GROUP</base>
+        <trans>Remove user group</trans>
+    </entry>
+    <entry>
+        <base>PASSWORD_RESET</base>
+        <trans>Reset password</trans>
+    </entry>
+    <entry>
+        <base>RESTORE</base>
+        <trans>Restore</trans>
+    </entry>
+    <entry>
+        <base>SHUTDOWN</base>
+        <trans>Shutdown</trans>
+    </entry>
+    <entry>
+        <base>SUCCESS</base>
+        <trans>Success</trans>
+    </entry>
+    <entry>
+        <base>ACCOUNT_NAME_INVALID</base>
+        <trans>The account name entered is invalid.</trans>
+    </entry>
+    <entry>
+        <base>ACCOUNT_NAME_INVALID_CHARS</base>
+        <trans>The account name you entered contained invalid characters.</trans>
+    </entry>
+    <entry>
+        <base>PASSWORD_OLD_INVALID_CHARS</base>
+        <trans>The old password you entered contained invalid characters.</trans>
+    </entry>
+    <entry>
+        <base>PASSWORD_INVALID_CHARS</base>
+        <trans>The password you entered contained invalid characters.</trans>
+    </entry>
+    <entry>
+        <base>PASSWORD_VERIFY_ERROR</base>
+        <trans>The passwords you entered did not match.</trans>
+    </entry>
+    <entry>
+        <base>ACCOUNT_USER_NONE</base>
+        <trans>There are no user accounts in the system.</trans>
+    </entry>
+    <entry>
+        <base>ACCOUNT_GROUP_NONE</base>
+        <trans>There are no user groups in the system.</trans>
+    </entry>
+    <entry>
+        <base>ERROR_INVALID_CHARS</base>
+        <trans>Unexpected characters in description.</trans>
+    </entry>
+    <entry>
+        <base>USER_NAME</base>
+        <trans>User Name</trans>
+    </entry>
+    <entry>
+        <base>YOUR_ACCOUNT</base>
+        <trans>Your account:</trans>
+    </entry>
+    <entry>
+      <base>YOUR_ACCOUNT_INVALID</base>
+      <trans>The account name entered is invalid.</trans>
+    </entry>
+    <entry>
+        <base>PASSWORD_CHANGE_SUCCESS</base>
+        <trans>Your password has been successfully changed.</trans>
+    </entry>
+    <entry>
+        <base>FM_NONBLANK</base>
+        <trans>This field must not be left blank</trans>
+    </entry>
+    <entry>
+        <base>FM_INTEGER</base>
+        <trans>This field must contain a positive integer</trans>
+    </entry>
+    <entry>
+        <base>FM_NUMBER</base>
+        <trans>This field must contain a number</trans>
+    </entry>
+    <entry>
+        <base>FM_WORD</base>
+        <trans>This field must look like a single word.</trans>
+    </entry>
+    <entry>
+        <base>FM_DATE</base>
+        <trans>The data entered could not be parsed as a date</trans>
+    </entry>
+    <entry>
+        <base>FM_CREDIT_CARD_NUMBER1</base>
+        <trans>You must enter a credit card number</trans>
+    </entry>
+    <entry>
+        <base>FM_CREDIT_CARD_NUMBER2</base>
+        <trans>Credit card numbers shouldn't have anything but numbers, spaces or dashes</trans>
+    </entry>
+    <entry>
+        <base>FM_CREDIT_CARD_NUMBER3</base>
+        <trans>Must be at least 14 characters in length</trans>
+    </entry>
+    <entry>
+        <base>FM_CREDIT_CARD_NUMBER4</base>
+        <trans>Doesn't appear to be a valid credit card number</trans>
+    </entry>
+    <entry>
+        <base>FM_CREDIT_CARD_EXPIRY1</base>
+        <trans>No expiry date entered.</trans>
+    </entry>
+    <entry>
+        <base>FM_CREDIT_CARD_EXPIRY2</base>
+        <trans>Expiry date must be in the format MM/YY or MM/YYYY</trans>
+    </entry>
+    <entry>
+        <base>FM_CREDIT_CARD_EXPIRY3</base>
+        <trans>This expiry date appears to have already passed</trans>
+    </entry>
+    <entry>
+        <base>FM_CREDIT_CARD_EXPIRY4</base>
+        <trans>This expiry date appears to be too far in the future</trans>
+    </entry>
+    <entry>
+        <base>FM_ISO_COUNTRY_CODE1</base>
+        <trans>You must provide a country code</trans>
+    </entry>
+    <entry>
+        <base>FM_ISO_COUNTRY_CODE2</base>
+        <trans>This field does not contain an ISO country code</trans>
+    </entry>
+    <entry>
+        <base>FM_US_STATE</base>
+        <trans>This doesn't appear to be a valid 2-letter US state abbreviation</trans>
+    </entry>
+    <entry>
+        <base>FM_US_ZIPCODE</base>
+        <trans>US zip codes must contain 5 or 9 numbers</trans>
+    </entry>
+    <entry>
+        <base>FM_MINLENGTH1</base>
+        <trans>Minimum length has been specified meaninglessly as {$minlength}</trans>
+    </entry>
+    <entry>
+        <base>FM_MINLENGTH2</base>
+        <trans>This field must be at least {$minlength} characters</trans>
+    </entry>
+    <entry>
+        <base>FM_MAXLENGTH1</base>
+        <trans>Maximum length has been specified meaninglessly as {$maxlength}</trans>
+    </entry>
+    <entry>
+        <base>FM_MAXLENGTH2</base>
+        <trans>This field must be no more than {$maxlength} characters</trans>
+    </entry>
+    <entry>
+        <base>FM_EXACTLENGTH1</base>
+        <trans>You must specify the length for the field.</trans>
+    </entry>
+    <entry>
+        <base>FM_EXACTLENGTH2</base>
+        <trans>You must specify the exactlength of the field with an integer</trans>
+    </entry>
+    <entry>
+        <base>FM_EXACTLENGTH3</base>
+        <trans>This field must be exactly {$exactlength} characters</trans>
+    </entry>
+    <entry>
+        <base>FM_LENGTHRANGE1</base>
+        <trans>You must specify the maximum and minimum length for the field.</trans>
+    </entry>
+    <entry>
+        <base>FM_LENGTHRANGE2</base>
+        <trans>You must specify the maximum and minimum lengths of the field with an integer</trans>
+    </entry>
+    <entry>
+        <base>FM_LENGTHRANGE3</base>
+        <trans>This field must be between {$minlength} and {$maxlength} characters</trans>
+    </entry>
+    <entry>
+        <base>FM_URL</base>
+        <trans>This field must contain a URL starting with http:// or ftp://</trans>
+    </entry>
+    <entry>
+        <base>FM_EMAIL_SIMPLE1</base>
+        <trans>You must enter an email address.</trans>
+    </entry>
+    <entry>
+        <base>FM_EMAIL_SIMPLE2</base>
+        <trans>This field doesn't look like an RFC822-compliant email address</trans>
+    </entry>
+    <entry>
+        <base>FM_DOMAIN_NAME</base>
+        <trans>This field doesn't look like a valid Internet domain name or hostname.</trans>
+    </entry>
+    <entry>
+        <base>FM_IP_NUMBER1</base>
+        <trans>This field must contain a valid IP number and can not be left blank.</trans>
+    </entry>
+    <entry>
+        <base>FM_IP_NUMBER2</base>
+        <trans>Not enough octets (expected X.X.X.X)</trans>
+    </entry>
+    <entry>
+        <base>FM_IP_NUMBER3</base>
+        <trans>{$octet} is more than 255</trans>
+    </entry>
+    <entry>
+        <base>FM_USERNAME</base>
+        <trans>This field must look like a valid username (3 to 8 letters and numbers)</trans>
+    </entry>
+    <entry>
+        <base>FM_PASSWORD1</base>
+        <trans>You must provide a password.</trans>
+    </entry>
+    <entry>
+        <base>FM_PASSWORD2</base>
+        <trans>The password you provided was not a good password. A good password must contain all of the following: upper case letter, lower case letter, number, non-alphanumeric character, be at least 7 characters long.</trans>
+    </entry>
+    <entry>
+        <base>FM_MAC_ADDRESS1</base>
+        <trans>You must provide a MAC address.</trans>
+    </entry>
+    <entry>
+        <base>FM_MAC_ADDRESS2</base>
+        <trans>The MAC address you provided was not valid.</trans>
+    </entry>
+    <entry>
+       <base>FM_ERR_UNEXPECTED_DESC</base>
+       <trans>Error: unexpected or missing characters in description</trans>
+    </entry>
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/backup  1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/backup   2008-10-13 00:22:32.000000000 -0600
@@ -0,0 +1,675 @@
+<lexicon lang="ja">
+  <entry>
+   <base>BACKUP_TITLE</base>
+   <trans>Backup or restore server data</trans>
+  </entry>
+  <entry>
+   <base>BACKUP_DESC</base>
+   <trans><![CDATA[ <P>The server provides two ways to back up and restore your server: using your local desktop or a tape drive.</P> <P>The first method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. The \"Verify desktop backup file\" option can be used to check the integrity of a desktop backup file.</P> <P>The tape backup method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Both restore methods allow you to restore your configuration and user data files. <b>Ideally, the restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+  </entry>
+  <entry>
+   <base>BACKUP_DESC_DAR</base>
+   <trans><![CDATA[ <P>The server provides three ways to back up and restore your server: using your local desktop, a tape drive or a workstation on your LAN.</P> <P>The first method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. The \"Verify desktop backup file\" option can be used to check the integrity of a desktop backup file.</P> <P>The tape backup method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>The workstation backup method uses a software package called <I>dar</I> to back up your server configuration and data files to a workstation on your LAN (or a local USB disk). This requires you provide a writable share (smbfs, cifs, or nfs) on the backup workstation or an a local USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every night. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+  </entry>
+  <entry>
+   <base>BACKUP_CONFIG_STATUS</base>
+   <trans>Backup configuration and status</trans>
+  </entry>
+  <entry>
+   <base>TAPE_BACKUPS_ENABLED</base>
+   <trans><![CDATA[ Tape backups are currently <b>enabled</b>. ]]></trans>
+  </entry>
+  <entry>
+   <base>BACKUPS_RUN_AT</base>
+   <trans>Regular tape backups will run at:</trans>
+  </entry>
+  <entry>
+   <base>REMINDER_MESSAGE_AT</base>
+   <trans>Reminder messages will be sent at:</trans>
+  </entry>
+  <entry>
+   <base>TAPE_BACKUPS_DISABLED</base>
+   <trans><![CDATA[ Tape backups are <b>disabled</b> ]]></trans>
+  </entry>
+  <entry>
+   <base>DESKTOP_BACKUP</base>
+   <trans>Backup to desktop</trans>
+  </entry>
+  <entry>
+   <base>DESKTOP_RESTORE</base>
+   <trans>Restore from desktop</trans>
+  </entry>
+  <entry>
+   <base>DESKTOP_VERIFY</base>
+   <trans>Verify desktop backup file</trans>
+  </entry>
+  <entry>
+   <base>TAPE_CONFIGURE</base>
+   <trans>Configure tape backup</trans>
+  </entry>
+  <entry>
+   <base>TAPE_RESTORE</base>
+   <trans>Restore from tape</trans>
+  </entry>
+  <entry>
+   <base>RESTORE_IN_PROGRESS_BEGAN_AT</base>
+   <trans>A system restore is in progress. It began at:</trans>
+  </entry>
+  <entry>
+   <base>REFRESH_THIS_DISPLAY</base>
+   <trans>Refresh this display</trans>
+  </entry>
+  <entry>
+   <base>CONFIGURE_TAPE_BACKUP</base>
+   <trans>Configure tape backup</trans>
+  </entry>
+  <entry>
+   <base>RESTORE_COMPLETED</base>
+   <trans>A system restore has completed</trans>
+  </entry>
+  <entry>
+   <base>STARTED_AT</base>
+   <trans>It began at:</trans>
+  </entry>
+  <entry>
+   <base>FINISHED_AT</base>
+   <trans>and finished at:</trans>
+  </entry>
+  <entry>
+   <base>YOU_MUST_REBOOT</base>
+   <trans>You must reboot the server to activate any configuration changes that were made as a result of this restore.</trans> 
+  </entry> 
+  <entry>
+   <base>REBOOT</base>
+   <trans>Reboot</trans>
+  </entry>
+  <entry>
+   <base>SELECT_AN_ACTION</base>
+   <trans>Select an action</trans>
+  </entry>
+  <entry>
+   <base>X_BACKUP_OR_RESTORE</base>
+   <trans>X Backup or restore server data</trans>
+  </entry>
+  <entry>
+   <base>ERR_PRE_BACKUP</base>
+   <trans>Error occurred during pre-backup actions.</trans>
+  </entry>
+  <entry>
+   <base>ERR_PRE_RESTORE</base>
+   <trans>Error occurred during pre-restore actions.</trans>
+  </entry>
+  <entry>
+   <base>ERR_POST_BACKUP</base>
+   <trans>Error occurred during post-backup actions.</trans>
+  </entry>
+  <entry>
+   <base>RESTORE_SERVER_CONFIG</base>
+   <trans>Restore server configuration</trans>
+  </entry>
+  <entry>
+   <base>DESKTOP_RESTORE_DESC</base>
+   <trans><![CDATA[ This process will upload a server backup file from your local desktop to your server and restore the configuration and user data files. <B>The restore should be performed on a freshly installed server</B>. ]]></trans>
+  </entry>
+  <entry>
+   <base>FREE_SPACE</base>
+   <trans><![CDATA[ You have approximately $tmpfree free space on the server. Check that desktop backup file is less than $halffree before commencing the restore. ]]></trans>
+  </entry>
+  <entry>
+   <base>MUST_REBOOT_AFTER_RESTORE</base>
+   <trans>After the restore completes you must reboot the server.</trans>
+  </entry>
+  <entry>
+   <base>FILE_TO_RESTORE</base>
+   <trans>Backup file to restore from</trans>
+  </entry>
+  <entry>
+   <base>VERIFY_BACKUP_DESC</base>
+   <trans><![CDATA[ <p>This option will display the names of all files in a previously created desktop backup file. You can use this option to verify the contents of the backup file.</p> <p>The last file contained in the backup file should be the file named "smbpasswd".</p> ]]></trans>
+  </entry>
+  <entry>
+   <base>SELECT_BACKUP_FILE</base>
+   <trans>Select backup file</trans>
+  </entry>
+  <entry>
+   <base>VERIFY</base>
+   <trans>Verify</trans>
+  </entry>
+  <entry>
+   <base>RESTORE_CANNOT_PROCEED</base>
+   <trans>Unable to proceed with restore of server configuration</trans>
+  </entry>
+  <entry>
+   <base>ANOTHER_RESTORE_IN_PROGRESS</base>
+   <trans>Another restore is in progress. Please try again later.</trans>
+  </entry>
+  <entry>
+   <base>RESTORE_IN_PROGRESS</base>
+   <trans>Restore in progress</trans>
+  </entry>
+  <entry>
+   <base>RESTORE_IN_PROGRESS_DESC</base>
+   <trans>After the restore completes you must reboot the server. Your restore is complete when /etc/smbpasswd has been restored and the words "Restore complete" appear at the bottom of your screen.</trans>
+  </entry>
+  <entry>
+   <base>FILES_HAVE_BEEN_RESTORED</base>
+   <trans>The following files and directories have been restored:</trans>
+  </entry>
+  <entry>
+   <base>RESTORE_FAILED_MSG</base>
+   <trans>Restore failed! There was an error in reading the backup file.</trans>
+  </entry>
+  <entry>
+   <base>RESTORE_COMPLETE</base>
+   <trans>Restore complete</trans>
+  </entry>
+  <entry>
+   <base>ERR_RESTORING_GID</base>
+   <trans>Error occured while restoring gid of 'www'</trans>
+  </entry>
+  <entry>
+   <base>ERR_RESTORING_INITIAL_GRP</base>
+   <trans>Error occured while restoring initial group of 'www'.</trans>
+  </entry>
+  <entry>
+   <base>RESTORE_FAILED</base>
+   <trans>Restore failed! The backup file was incomplete.</trans>
+  </entry>
+  <entry>
+   <base>COULD_NOT_EXEC_PIPELINE</base>
+   <trans>Could not execute backup pipeline:</trans>
+  </entry>
+  <entry>
+   <base>COULD_NOT_DECODE</base>
+   <trans>Could not decode backup file:</trans>
+  </entry>
+  <entry>
+   <base>FILES_IN_BACKUP</base>
+   <trans>The following files are contained in the backup file:</trans>
+  </entry>
+  <entry>
+   <base>VERIFY_COMPLETE</base>
+   <trans>Verification is complete</trans>
+  </entry>
+  <entry>
+   <base>BACKUP_FILE_INCOMPLETE</base>
+   <trans>The backup file was incomplete</trans>
+  </entry>
+  <entry>
+   <base>ERR_READING_FILE</base>
+   <trans>There was an error in reading the backup file.</trans>
+  </entry>
+  <entry>
+   <base>ENABLE_DISABLE_TAPE</base>
+   <trans>Enable/Disable Nightly Tape Backup</trans>
+  </entry>
+  <entry>
+   <base>TAPE_CONFIG_DESC</base>
+   <trans><![CDATA[ <p>Select whether you wish to enable nightly backups. Then indicate the desired times for the backup and the load tape reminder.</p> <p>The tape backup requires a supported tape drive. A warning message will be sent to the administrator at the designated reminder time if the tape drive is empty.</p> ]]></trans>
+  </entry>
+  <entry>
+   <base>ENABLE_TAPE_BACKUP</base>
+   <trans>Enable tape backup</trans>
+  </entry>
+  <entry>
+   <base>TAPE_BACKUP_TIME</base>
+   <trans>Tape backup time of day (hour/min)</trans>
+  </entry>
+  <entry>
+   <base>LOAD_TAPE_REMINDER_TIME</base>
+   <trans>Load tape reminder time of day (hour/min)</trans>
+  </entry>
+  <entry>
+   <base>AM/PM</base>
+   <trans>AM/PM</trans>
+  </entry>
+  <entry>
+   <base>AM</base>
+   <trans>AM</trans>
+  </entry>
+  <entry>
+   <base>PM</base>
+   <trans>PM</trans>
+  </entry>
+  <entry>
+   <base>UPDATE_CONF</base>
+   <trans>更新</trans>
+  </entry>
+  <entry>
+   <base>UPDATING_TAPE_CONF</base>
+   <trans>Updating tape backup configuration</trans>
+  </entry>
+  <entry>
+   <base>ERR_INVALID_HOUR</base>
+   <trans>Error: invalid backup hour:</trans>
+  </entry>
+  <entry>
+   <base>BETWEEN_0_AND_12</base>
+   <trans>Please choose an hour between 0 and 12.</trans>
+  </entry>
+  <entry>
+   <base>ERR_INVALID_MINUTE</base>
+   <trans>Error: invalid backup minute:</trans>
+  </entry>
+  <entry>
+   <base>BETWEEN_0_AND_59</base>
+   <trans>Please choose a minute between 0 and 59.</trans>
+  </entry>
+  <entry>
+   <base>ERR_INVALID_REMINDER_HOUR</base>
+   <trans>Error: invalid reminder hour:</trans>
+  </entry>
+  <entry>
+   <base>ERR_INVALID_REMINDER_MINUTE</base>
+   <trans>Error: invalid reminder minute:</trans>
+  </entry>
+  <entry>
+   <base>ERR_CONF_BACKUP</base>
+   <trans>Error occured during conf-backup event.</trans>
+  </entry>
+  <entry>
+   <base>SUCCESSFULLY_ENABLED_TAPE</base>
+   <trans>Successfully enabled tape backups</trans>
+  </entry>
+  <entry>
+   <base>WITH_BACKUP_TIME</base>
+   <trans>with backup time:</trans>
+  </entry>
+  <entry>
+   <base>WITH_REMINDER_TIME</base>
+   <trans>and load tape reminder time:</trans>
+  </entry>
+  <entry>
+   <base>SUCCESSFULLY_DISABLED</base>
+   <trans>Successfully disabled tape backups</trans>
+  </entry>
+  <entry>
+   <base>RESTORE_CONF_FROM_TAPE</base>
+   <trans>Restore server configuration from tape backup</trans>
+  </entry>
+  <entry>
+   <base>RESTORE_CONF_FROM_TAPE_DESC</base>
+   <trans><![CDATA[ <P>This process will restore the configuration and user data files from a server tape backup. <B>The restore should be performed on a freshly installed server</B>.</P> <P>Ensure that you have loaded the desired backup tape into the tape drive before proceeding.</P> <P>After the restore completes you must reboot the server.</P> ]]></trans>
+  </entry>
+  <entry>
+   <base>RESTORE_FROM_TAPE</base>
+   <trans>Restore From Tape</trans>
+  </entry>
+  <entry>
+   <base>UNABLE_TO_RESTORE_CONF</base>
+   <trans>Unable to restore server configuration</trans>
+  </entry>
+  <entry>
+   <base>RESTORING_FROM_TAPE</base>
+   <trans>Restoring From Tape</trans>
+  </entry>
+  <entry>
+   <base>NOW_RESTORING_FROM_TAPE</base>
+   <trans>Your server configuration and user data files are now being restored from tape.</trans>
+  </entry>
+  <entry>
+   <base>ERR_RESTORING_FROM_TAPE</base>
+   <trans>Error occurred restoring files from tape.</trans>
+  </entry>
+  <entry>
+   <base>ERR_UPDATING_CONF_AFTER_TAPE_RESTORE</base>
+   <trans>Error occurred while updating system configuration after tape restore.</trans>
+  </entry>
+  <entry>
+   <base>COULD_NOT_FORK</base>
+   <trans>Could not fork:</trans>
+  </entry>
+  <entry>
+   <base>SERVER_REBOOT</base>
+   <trans>Server reboot</trans>
+  </entry>
+  <entry>
+   <base>SERVER_WILL_REBOOT</base>
+   <trans>Your server will now reboot.</trans>
+  </entry>
+  <entry>
+   <base>NO_UID_FOR_NAME</base>
+   <trans>Could not get uid for user named:</trans>
+  </entry>
+  <entry>
+   <base>PAGE_REFRESH_IN</base>
+   <trans><![CDATA[ This page will refresh to the status display in {$sec} seconds, or click <a href="/server-manager/cgi-bin/backup">here</a>. ]]></trans>
+  </entry>
+    <entry>
+       <base>Backup or restore</base>
+       <trans>Backup or restore</trans>
+    </entry>
+
+  <entry>
+       <base>BACKUP_DESKTOP_TOO_BIG</base>
+       <trans><![CDATA[ <div class="error"> Your server has too much data for a reliable backup to desktop. </div> ]]></trans>
+  </entry>
+   <entry>
+   <base>WORKSTN_BACKUPS_DISABLED</base>
+   <trans><![CDATA[ Workstation backups are <b>disabled</b> ]]></trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_BACKUPS_ENABLED</base>
+   <trans><![CDATA[ Workstation backups are currently <b>enabled</b>. ]]></trans>
+  </entry>
+  <entry>
+   <base>WKBACKUPS_RUN_AT</base>
+   <trans>Regular workstation backups will run at:</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_CONFIGURE</base>
+   <trans>Configure workstation backup</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_VERIFY</base>
+   <trans>Verify workstation backup</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_RESTORE</base>
+   <trans>Restore from workstation</trans>
+  </entry>
+  <entry>
+   <base>CONFIGURE_WORKSTN_BACKUP</base>
+   <trans>Configure Workstation Backup</trans>
+  </entry>
+  <entry>
+   <base>ENABLE_DISABLE_WORKSTN</base>
+   <trans>Enable/Disable Daily Workstation Backup</trans>
+  </entry>
+  <entry>
+   <base>ENABLE_WORKSTN_BACKUP</base>
+   <trans>Enable Workstation Backup</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_BACKUP_TIME</base>
+   <trans>Workstation backup time of day (hour/min)</trans>
+  </entry>
+  <entry>
+   <base>UPDATING_WORKSTN_CONF</base>
+   <trans>Updating workstation backup configuration</trans>
+  </entry>
+  <entry>
+   <base>SUCCESSFULLY_ENABLED_WORKSTN</base>
+   <trans>Successfully enabled workstation backups</trans>
+  </entry>
+  <entry>
+   <base>SUCCESSFULLY_DISABLED_WORKSTN</base>
+   <trans>Successfully disabled workstation backups</trans>
+  </entry>
+  <entry>
+   <base>VERIFY_WORKSTN_BACKUP_FILE</base>
+   <trans>Verify workstation backup file</trans>
+  </entry>
+  <entry>
+   <base>VERIFY_WORKSTN_BACKUP_DESC</base>
+   <trans><![CDATA[ <p>This option will display the names of all files in a previously created workstation daily backup. You can use this option to verify the contents of the backup.<b>You must choose the backup you want to verify</b></p> <p>You will see all files in the selected backup.</p> Backup files are verified from shared folder : ]]></trans>
+  </entry>
+  <entry>
+   <base>RESTORE_CONF_FROM_WORKSTN</base>
+   <trans>Restore server configuration from workstation backup</trans>
+  </entry>
+  <entry>
+   <base>RESTORE_CONF_FROM_WORKSTN_DESC</base>
+   <trans><![CDATA[ <p>This process will restore the configuration and user data files from a Server workstation backup. <b>The restore should be performed on a freshly installed Server</b>.</p> <p>Ensure that choose the right backup to restore below before proceeding.</p> <p>After the restore completes you must reboot the server.</p> Backup will be restored from : ]]></trans>
+  </entry>
+  <entry>
+   <base>RESTORE_FROM_WORKSTN</base>
+   <trans>Restore From Workstation</trans>
+  </entry>
+  <entry>
+   <base>RESTORING_FROM_WORKSTN</base>
+   <trans>Restoring From Workstation</trans>
+  </entry>
+  <entry>
+   <base>NOW_RESTORING_FROM_WORKSTN</base>
+   <trans>Your server configuration and user data files are now being restored from workstation shared folder.</trans>
+  </entry>
+  <entry>
+   <base>ERR_RESTORING_FROM_WORKSTN</base>
+   <trans>Error occurred restoring files from workstation.</trans>
+  </entry>
+  <entry>
+   <base>ERR_UPDATING_CONF_AFTER_WORKSTN_RESTORE</base>
+   <trans>Error occurred while updating system configuration after workstation restore.</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_NAME</base>
+   <trans>Workstation IP or hostname</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_BACKUP_SETTINGS</base>
+   <trans>Workstation Backup Settings</trans>
+  </entry>
+  <entry>
+   <base>SHARED_FOLDER_NAME</base>
+   <trans>Backup share</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_LOGIN</base>
+   <trans>Login name</trans>
+  </entry>
+  <entry>
+   <base>WORKSTATION_BACKUP_DEST</base>
+   <trans>Backup workstation settings</trans>
+  </entry>
+  <entry>
+   <base>CONFIGURE_WORKSTN_BACKUP_DESC</base>
+   <trans>You can set the number of successive backup sets to keep on the workstation, with automatic rotation. Each set may contain saved datas for several consecutive days. In this case first backup of the set is full backup, others daily backups are incremental. You can also set a time limit for each backup session or for incremental backups only. When this limit occurs, backup is cleanly stopped and the next incremental backup will safely continue with unsaved and modified datas.</trans>
+  </entry>
+  <entry>
+   <base>ERR_INVALID_WORKSTN</base>
+   <trans>Invalid Workstation IP or Hostname</trans>
+  </entry>
+  <entry>
+   <base>ERR_INVALID_FOLDER</base>
+   <trans>Invalid share name</trans>
+  </entry>
+  <entry>
+   <base>ERR_INVALID_LOGIN</base>
+   <trans>Invalid Login</trans>
+  </entry>
+  <entry>
+   <base>ERR_INVALID_PASSWORD</base>
+   <trans>Invalid Password</trans>
+  </entry>
+  <entry>
+   <base>ERR_MOUNTING_SMBSHARE</base>
+   <trans>Unable to mount workstation shared folder</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_NOT_SET</base>
+   <trans>You must first correctly configure your workstation backup</trans>
+  </entry>
+  <entry>
+   <base>NO_BACKUPS_TO_RESTORE</base>
+   <trans>There is no backup set on configured workstation shared folder. Verify your configuration settings.</trans>
+  </entry>
+  <entry>
+   <base>NUMBER_OF_SETS</base>
+   <trans>Number of rotating backup sets</trans>
+  </entry>
+  <entry>
+   <base>NUMBER_OF_FILES_IN_SET</base>
+   <trans>Daily backups in each set</trans>
+  </entry>
+  <entry>
+   <base>ERR_INVALID_SETS_NUMBER</base>
+   <trans>Sets number must be 1 or greater</trans>
+  </entry>
+  <entry>
+   <base>ERR_INVALID_FILES_IN_SET_NUMBER</base>
+   <trans>This number must be 1 or greater. First backup in set is <b>full</b> others are <b>incrementals</b></trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_TIMEOUT</base>
+   <trans>Optional backup session timeout (hours)</trans>
+  </entry>
+  <entry>
+   <base>INC_ONLY_TIMEOUT</base>
+   <trans>Don't timeout full backup sessions</trans>
+  </entry>
+  <entry>
+   <base>ERR_INVALID_TIMEOUT</base>
+   <trans>Maximum backup time must be set between 1 and 24 hours</trans>
+  </entry>
+  <entry>
+   <base>ERR_NO_HOST_DIR</base>
+   <trans>No directory for your host in shared folder. Maybe your host name is different from backup ones</trans>
+  </entry>
+  <entry>
+   <base>ERROR_READING_FILE</base>
+   <trans>Error while reading files from</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_SEL_RESTORE</base>
+   <trans>Selective file restore from workstation</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_SELECTIVE_RESTORE</base>
+   <trans>Workstation selective file restore</trans>
+  </entry>
+  <entry>
+   <base>ALL_BACKUPS</base>
+   <trans>All backups</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_SEL_REST_DESC</base>
+   <trans><![CDATA[ This process will restore only specified files and directories. You must first choose the backup from which the files will be restored. If you don't know in which backup are the required files, you can select 'All backups' option. <br/><br/> The next panel will display available files and directories, so you can choose the ones to restore. To restrict the number of files and directories displayed in this panel, you have the option to give now a filtering expression, applied as a regular expression to the displayed names.<br/><br/> You have the responsability <b>not to restore</b> files which could break the functioning of your server.<br/> <br/>Currently, files will be restored from : ]]></trans>
+  </entry>
+  <entry>
+   <base>BACKUP_CHOICE</base>
+   <trans>Selecting files to display</trans>
+  </entry>
+  <entry>
+   <base>SELECT_DATE_BEFORE</base>
+   <trans>Restore most recent before</trans>
+  </entry>
+  <entry>
+   <base>FILTER_EXPRESSION</base>
+   <trans>Names filtered by</trans>
+  </entry>
+  <entry>
+   <base>READ_COMPLETE</base>
+   <trans><![CDATA[ You can choose all the directories and files you want to restore in the displayed list (use ctrl or shift for multiple selection). <br/> <b>Warning :</b> If you select a directory, all contained files and directories will be restored.<p/> By default the most recent version of selected files is restored, but if you specify a date in the format <i>[ [ [yyyy/]mm/]dd-]hh:mm[:ss]</i> the process will restore only the most recent version modified <b>before the given date</b>. ]]></trans>
+  </entry>
+  <entry>
+   <base>ERR_INVALID_SELDATE</base>
+   <trans>Date format is invalid, must be [ [ [yyyy/]mm/]dd-]hh:mm[:ss]. ie: 2005/12/31-08:23:32 or 10-08:32 or 08:32</trans>
+  </entry>
+  <entry>
+   <base>SELECT_FILES_TO_RESTORE</base>
+   <trans>Select files to restore</trans>
+  </entry>
+  <entry>
+   <base>ERR_WHILE_UNMOUNTING</base>
+   <trans>Error occurs when unmounting distant share</trans>
+  </entry>
+  <entry>
+   <base>ERR_DAR_CATALOG</base>
+   <trans>Error when using Dar catalog</trans>
+  </entry>
+  <entry>
+   <base>COMPRESSION_LEVEL</base>
+   <trans>Backup compression level [0-9]</trans>
+  </entry>
+  <entry>
+   <base>FULL_ONLY_ON</base>
+   <trans>Full backup is allowed on</trans>
+  </entry>
+  <entry>
+   <base>ERR_INVALID_COMPRESSION</base>
+   <trans>Compression level must be set between 0 (no compression) and 9 (maximum compression)</trans>
+  </entry>
+  <entry>
+   <base>DOW</base>
+   <trans>Sunday Monday Tuesday Wednesday Thursday Friday Saturday Everyday</trans>
+  </entry>
+  <entry>
+   <base>CONFIGURATION_TO_BE_DONE</base>
+   <trans>You must before execute Workstation backup configuration option</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_BACKUP_DESC</base>
+   <trans><![CDATA[ <p>This panel displays the present workstation backup configuration. You can change it in this panel and the next one.</p><p/> ]]></trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_BACKUP_NOT_CONFIGURED</base>
+   <trans><![CDATA[ <p>Presently, workstation backup is not configured. You can set this configuration with this panel and the next one.</p><p/> ]]></trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_BACKUP_ENABLED</base>
+   <trans>Backup is</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_BACKUP_USB</base>
+   <trans>Backup is made on local USB disk</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_BACKUP_HOST</base>
+   <trans>Backup is made on LAN workstation</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_BACKUP_VFSTYPE</base>
+   <trans>via</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_BACKUP_SHARE</base>
+   <trans>Destination backup share folder is</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_BACKUP_TOD</base>
+   <trans>Daily backup occurs at</trans>
+  </entry>
+  <entry>
+   <base>LOGIN</base>
+   <trans>Login is</trans>
+  </entry>
+  <entry>
+   <base>PASSWORD</base>
+   <trans>Password is</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_BACKUP_SETSNUM</base>
+   <trans>Number of rotating backup sets is</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_BACKUP_DAYSINSET</base>
+   <trans>Number of daily backups contained in each set is</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_BACKUP_COMPRESSION</base>
+   <trans>Compression level (0-7) of backup is</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_BACKUP_TIMEOUT</base>
+   <trans>Each daily backup session is cleanly timed out after</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_BACKUP_INCONLY_TIMEOUT</base>
+   <trans>except full backups which are cleanly timed out after 24 hours</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_FULL_BACKUP_EVERYDAY</base>
+   <trans>Full backup sessions (new backup set) are allowed everyday</trans>
+  </entry>
+  <entry>
+   <base>WORKSTN_FULL_BACKUP_DAY</base>
+   <trans>Full backup session (new backup sets) is allowed only on</trans>
+  </entry>
+  <entry>
+   <base>WORKSTATION_BACKUP_SETCONF</base>
+   <trans>Create or modify workstation backup configuration</trans>
+  </entry>
+  <entry>
+   <base>SELECT_VFS_TYPE</base>
+   <trans>Select the type of share for backup destination</trans>
+  </entry>
+  <entry>
+   <base>ERR_NO_USB_DISK</base>
+   <trans>Error : No USB disk available. Please connect an USB disk or select another type of backup share.</trans>
+  </entry>
+  <entry>
+   <base>HOURS</base>
+   <trans>hours.</trans>
+  </entry>
+ </lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/clamav  1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/clamav   2008-10-13 00:22:42.000000000 -0600
@@ -0,0 +1,38 @@
+<lexicon lang="ja">
+    <entry>
+        <base>FORM_TITLE</base>
+        <trans>Antivirus settings</trans>
+    </entry>
+    <entry>
+        <base>LABEL_FILESYSTEM_SCAN_PERIOD</base>
+        <trans>Scan filesystem</trans>
+    </entry>
+    <entry>
+        <base>DESC_FILESYSTEM_SCAN_PERIOD</base>
+        <trans><![CDATA[ <h2>General Settings</h2> If this option is enabled then the filesystem will be scanned for viruses. A report of any found viruses will be emailed to the administrator.]]></trans>
+    </entry>
+    <entry>
+        <base>LABEL_QUARANTINE</base>
+        <trans>Quarantine infected files</trans>
+    </entry>
+    <entry>
+        <base>LABEL_CLAM_VERSIONS</base>
+        <trans>ClamAV and db versions</trans>
+    </entry>
+    <entry>
+      <base>WEEKLY</base>
+      <trans>Weekly</trans>
+    </entry>
+    <entry>
+      <base>NEVER</base>
+      <trans>Never</trans>
+    </entry>
+    <entry>
+      <base>DAILY</base>
+      <trans>Daily</trans>
+    </entry>
+    <entry>
+        <base>SUCCESS</base>
+        <trans>The new clamav antivirus settings have been saved.</trans>
+    </entry>
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/datetime        1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/datetime 2008-10-13 00:22:49.000000000 -0600
@@ -0,0 +1,202 @@
+<lexicon lang="ja">
+    <entry>
+      <base>FORM_TITLE</base>
+      <trans>Date and time configuration</trans>
+    </entry>
+    <entry>
+      <base>INITIAL_DESC</base>
+      <trans>This is where you configure the date and time of this server. You may use an existing network time server or manually set the date and time for your time zone.</trans>
+    </entry>
+    <entry>
+      <base>SET_DATE_TITLE</base>
+      <trans>Set Date and Time</trans>
+    </entry>
+    <entry>
+      <base>COULD_NOT_OPEN_TZ_FILE</base>
+      <trans>Error: Could not open timezone file for reading:</trans>
+    </entry>
+    <entry>
+      <base>JANUARY</base>
+      <trans>January</trans>
+    </entry>
+    <entry>
+      <base>FEBRUARY</base>
+      <trans>February</trans>
+    </entry>
+    <entry>
+      <base>MARCH</base>
+      <trans>March</trans>
+    </entry>
+    <entry>
+      <base>APRIL</base>
+      <trans>April</trans>
+    </entry>
+    <entry>
+      <base>MAY</base>
+      <trans>May</trans>
+    </entry>
+    <entry>
+      <base>JUNE</base>
+      <trans>June</trans>
+    </entry>
+    <entry>
+      <base>JULY</base>
+      <trans>July</trans>
+    </entry>
+    <entry>
+      <base>AUGUST</base>
+      <trans>August</trans>
+    </entry>
+    <entry>
+      <base>SEPTEMBER</base>
+      <trans>September</trans>
+    </entry>
+    <entry>
+      <base>OCTOBER</base>
+      <trans>October</trans>
+    </entry>
+    <entry>
+      <base>NOVEMBER</base>
+      <trans>November</trans>
+    </entry>
+    <entry>
+      <base>DECEMBER</base>
+      <trans>December</trans>
+    </entry>
+    <entry>
+      <base>NEW_M/D/Y</base>
+      <trans>New month/day/year:</trans>
+    </entry>
+    <entry>
+      <base>NEW_H/M/S</base>
+      <trans>New hour/min/sec:</trans>
+    </entry>
+    <entry>
+      <base>AM/PM_AND_TZ</base>
+      <trans>AM/PM and time zone:</trans>
+    </entry>
+    <entry>
+      <base>NTP_ENABLE_DESC</base>
+      <trans>The server can periodically synchronize the system clock to a network time protocol (NTP) server. If you select this option, enter the hostname or IP address of the NTP server below.</trans>
+    </entry>
+    <entry>
+      <base>NTP_CONFIGURE_DESC</base>
+      <trans>The server is periodically synchronizing the system clock to the network time protocol (NTP) server specified below. To synchronize to a different NTP server, enter a different hostname or IP address in the field below.</trans>
+    </entry>
+    <entry>
+      <base>NTP_DISABLE_DESC</base>
+      <trans>Choose this option to stop syncronizing the system clock to the NTP server. When the NTP service is disabled, you can set the system date and time manually from this page.</trans>
+    </entry>
+    <entry>
+      <base>NTP_SERVER</base>
+      <trans>NTP Server</trans>
+    </entry>
+    <entry>
+      <base>VERIFY_DATE_AND_TIME</base>
+      <trans>Verify date and time</trans>
+    </entry>
+    <entry>
+      <base>NEW_DATE_AND_TIME</base>
+      <trans>New date and time setting:</trans>
+    </entry>
+    <entry>
+      <base>SETTING_DATE_AND_TIME</base>
+      <trans>Setting date and time</trans>
+    </entry>
+    <entry>
+      <base>INVALID_DAY</base>
+      <trans>Error: invalid day of month:</trans>
+    </entry>
+    <entry>
+      <base>BETWEEN_1_AND_31</base>
+      <trans>Please choose a day between 1 and 31.</trans>
+    </entry>
+    <entry>
+      <base>INVALID_YEAR</base>
+      <trans>Error: invalid year:</trans>
+    </entry>
+    <entry>
+      <base>FOUR_DIGIT_YEAR</base>
+      <trans>Please choose a four-digit year between 1900 and 2200.</trans>
+    </entry>
+    <entry>
+      <base>INVALID_HOUR</base>
+      <trans>Error: invalid hour:</trans>
+    </entry>
+    <entry>
+      <base>BETWEEN_1_AND_12</base>
+      <trans>Please choose an hour between 1 and 12.</trans>
+    </entry>
+    <entry>
+      <base>INVALID_MINUTE</base>
+      <trans>Error: invalid minute:</trans>
+    </entry>
+    <entry>
+      <base>BETWEEN_0_AND_59</base>
+      <trans>Please choose a minute between 0 and 59.</trans>
+    </entry>
+    <entry>
+      <base>INVALID_SECOND</base>
+      <trans>Error: invalid second</trans>
+    </entry>
+    <entry>
+      <base>UPDATING_CLOCK</base>
+      <trans><![CDATA[ System clock is being updated. Please wait for a few seconds, then click <A HREF="datetime?page=1&wherenext=Verify" TARGET="main">here</A> to verify changes. ]]></trans>
+    </entry>
+    <entry>
+      <base>ERR_SETTING_CLOCK</base>
+      <trans>Error occurred while setting system time and hardware clock.</trans>
+    </entry>
+    <entry>
+      <base>SERVER_DISABLED</base>
+      <trans>Network time server disabled successfully</trans>
+    </entry>
+    <entry>
+      <base>SERVER_DISABLED_DESC</base>
+      <trans><![CDATA[ You have disabled this service: The server will rely on its internal clock, and <b>will not</b> try to synchronize from a time server. ]]></trans>
+    </entry>
+    <entry>
+      <base>ERR_CHANGING_TS</base>
+      <trans>Error while changing network time server setting</trans>
+    </entry>
+    <entry>
+      <base>INVALID_NTP_ADDR</base>
+      <trans>Invalid NTP server address:</trans>
+    </entry>
+    <entry>
+      <base>SETTINGS_CHANGED</base>
+      <trans>Network time server setting changed successfully</trans>
+    </entry>
+    <entry>
+      <base>SYNC_WITH</base>
+      <trans>This server is now configured to synchronize periodically (via the Internet) with:</trans>
+    </entry>
+    <entry>
+      <base>INVALID_NTP_SERVER</base>
+      <trans><![CDATA[ Invalid NTP server, the server <b>will not</b> try to synchronize from a time server. ]]></trans>
+    </entry>
+    <entry>
+      <base>NETWORK_TIME_SERVER</base>
+      <trans>Network Time Server</trans>
+    </entry>
+    <entry>
+      <base>NTP_CONFIGURE_TITLE</base>
+      <trans>Configure Network Time Server</trans>
+    </entry>
+    <entry>
+      <base>NTP_ENABLE_TITLE</base>
+      <trans>Enable Network Time Server</trans>
+    </entry>
+    <entry>
+      <base>NTP_DISABLE_TITLE</base>
+      <trans>Disable Network Time Server</trans>
+    </entry>
+    <entry>
+      <base>CURRENT_SETTING</base>
+      <trans>Current setting</trans>
+    </entry>
+    <entry>
+      <base>Date and time</base>
+      <trans>Date and time</trans>
+    </entry>
+  </lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/directory       1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/directory        2008-10-13 00:22:55.000000000 -0600
@@ -0,0 +1,79 @@
+<lexicon lang="ja">
+   <entry>
+     <base>FORM_TITLE</base>
+       <trans>Change LDAP directory settings</trans>
+   </entry>    
+<entry>
+<base>LABEL_ROOT</base>
+<trans>Server root</trans>
+</entry>
+
+<entry>
+<base>DESCRIPTION</base>
+<trans>The LDAP server provides a network-available listing of the user accounts and groups on your server, and can be accessed using an LDAP client such as the Address Book feature in Netscape Communicator. Configure your LDAP client with the local IP address of your server, port number 389, and the server root parameter shown below.</trans>
+</entry>
+<entry>
+<base>DESC_DIRECTORY_ACCESS</base>
+<trans>You can control access to your LDAP directory: the private setting allows access only from your local network, and the public setting allows access from anywhere on the Internet.</trans>
+</entry>
+<entry>
+<base>DIRECTORY_ACCESS</base>
+<trans>LDAP directory access</trans>
+</entry>
+<entry>
+       <base>DESC_DEPARTMENT</base>
+<trans>These fields are the LDAP defaults for your organization. Whenever you create a new user account, you will be prompted to enter all of these fields (they can be different for each user) but the values you set here will show up as defaults. This is a convenience to make it faster to create user accounts.</trans>
+</entry>
+<entry>
+        <base>DEPARTMENT</base>
+        <trans>Default department</trans>
+</entry>
+
+<entry>
+        <base>COMPANY</base>
+        <trans>Default company</trans>
+</entry>
+<entry>
+        <base>STREET</base>
+        <trans>Default Street address</trans>
+</entry>
+
+<entry>
+        <base>CITY</base>
+        <trans>Default City</trans>
+</entry>
+
+<entry>
+        <base>PHONENUMBER</base>
+        <trans>Default Phone Number</trans>
+</entry>
+
+<entry>
+<base>DESC_EXISTING</base>
+<trans>You can either leave existing user accounts as they are, using the above defaults only for new users, or you can apply the above defaults to all existing users as well.</trans>
+</entry>
+
+
+
+<entry>
+<base>EXISTING</base>
+<trans>Existing users</trans>
+</entry>
+<entry>
+<base>SUCCESS</base>
+<trans>The new LDAP default settings have been saved.</trans>
+</entry>
+
+<entry>
+<base>LEAVE</base>
+<trans>Leave as they are</trans>
+</entry>
+<entry>
+<base>UPDATE</base>
+<trans>Update with new defaults</trans>
+</entry>
+    <entry>
+        <base>Directory</base>
+        <trans>Directory</trans>
+    </entry>
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/domains 1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/domains  2008-10-13 00:23:01.000000000 -0600
@@ -0,0 +1,133 @@
+<lexicon lang="ja">
+    <entry>
+        <base>FORM_TITLE</base>
+        <trans>Manage domains</trans>
+    </entry>
+    <entry>
+        <base>FORM_DESCRIPTION</base>
+        <trans><![CDATA[ <p>When you create a domain, your server will be able to receive e-mail for that domain and will also be able to host a web site for that domain.</p> <p><a class="button-like" href="domains?page=0&page_stack=&Next=Next&wherenext=DOMAINS_PAGE_CREATE">Add domain</a> ]]></trans>
+    </entry>
+    <entry>
+        <base>NO_VIRTUAL_DOMAINS</base>
+        <trans>There are no domains in the system.</trans>
+    </entry>
+    <entry>
+        <base>CURRENT_LIST_OF_DOMAINS</base>
+        <trans>Current list of domains</trans>
+    </entry>
+    <entry>
+        <base>PRIMARY_SITE</base>
+        <trans>primary site</trans>
+    </entry>
+    <entry>
+        <base>CONTENT</base>
+        <trans>{$content} i-bay</trans>
+    </entry>
+    <entry>
+        <base>CREATE_TITLE</base>
+        <trans>Create a new domain</trans>
+    </entry>
+    <entry>
+        <base>CONTENT_FIELD_DESCRIPTION</base>
+        <trans>For the web site, you may choose your primary web site or any i-bay as the content.</trans>
+    </entry>
+    <entry>
+        <base>DOMAIN_NAME_VALIDATION_ERROR</base>
+        <trans>Error: unexpected or missing characters in domain name {$domainName}. The domain name should contain one or more letters, numbers, periods and minus signs. Did not create new domain.</trans>
+    </entry>
+    <entry>
+        <base>DOMAIN_DESCRIPTION_VALIDATION_ERROR</base>
+        <trans>Error: unexpected or missing characters in domain description {$domainDesc}. Did not create new domain.</trans>
+    </entry>
+    <entry>
+        <base>DOMAIN_IN_USE_ERROR</base>
+        <trans>Error: domain {$domainName} is already in use. Did not create new domain.</trans>
+    </entry>
+    <entry>
+        <base>SYSTEM_DOMAIN_ERROR</base>
+        <trans>Error: domain {$domainName} is your system domain name. You cannot have a domain with the same name. Did not create new domain.</trans>
+    </entry>
+    <entry>
+        <base>SUCCESSFULLY_CREATED</base>
+        <trans>Successfully created domain {$domainName}. Your web server is now being restarted. The links on this page will be inactive until the web server restart is complete.</trans>
+    </entry>
+    <entry>
+        <base>MODIFY_TITLE</base>
+        <trans>Modify domain</trans>
+    </entry>
+    <entry>
+        <base>NONEXISTENT_DOMAIN_ERROR</base>
+        <trans>Error: {$domainName} is not an existing domain.</trans>
+    </entry>
+    <entry>
+        <base>SUCCESSFULLY_MODIFIED</base>
+        <trans>Successfully modified domain {$domainName}. Your web server is now being restarted. The links on this page will be inactive until the web server restart is complete.</trans>
+    </entry>
+    <entry>
+        <base>REMOVE_TITLE</base>
+        <trans>Remove domain</trans>
+    </entry>
+    <entry>
+        <base>REMOVE_DESCRIPTION</base>
+        <trans><![CDATA[ <p> You are about to remove the domain {$domain} ({$domainDesc}). </p> <p> <b>Are you sure you wish to remove this domain?</b> </p> ]]></trans>
+    </entry>
+    <entry>
+        <base>ERROR_WHILE_REMOVING_DOMAIN</base>
+        <trans>Error: internal failure while removing domain {$domain}.</trans>
+    </entry>
+    <entry>
+        <base>SUCCESSFULLY_DELETED</base>
+        <trans>Successfully deleted domain {$domain}. Your web server is now being restarted. The links on this page will be inactive until the web server restart is complete.</trans>
+    </entry>
+
+    <entry>
+        <base>DESC_CORPORATE_DNS_CURRENT</base>
+        <trans><![CDATA[ <hr class="sectionbar" /><h2>Corporate DNS Settings</h2> ]]></trans>
+    </entry>
+
+    <entry>
+        <base>BUTTON_CORPORATE_DNS</base>
+        <trans><![CDATA[ <p>If this server does not have access to the Internet, or you have special requirements for DNS resolution, enter the DNS server IP address here. You should not enter the address of your ISP's DNS servers here, as the server is capable of resolving all Internet DNS names without this additional configuration.</p> <p> <a class="button-like" href="domains?page=0&page_stack=&Next=Next&wherenext=DOMAINS_PAGE_CORPORATE_DNS">Modify corporate DNS settings</a> ]]></trans>
+    </entry>
+
+    <entry>
+        <base>DESC_CORPORATE_DNS</base>
+        <trans>If this server does not have access to the Internet, or you have special requirements for DNS resolution, enter the DNS server IP addresses here. These fields should be left blank unless you have a specific reason to configure other DNS servers. You should not enter the address of your ISP's DNS servers here, as the server is capable of resolving all Internet DNS names without this additional configuration.</trans>
+    </entry>
+
+    <entry>
+        <base>LABEL_CORPORATE_DNS_PRIMARY</base>
+        <trans>Primary corporate DNS server</trans>
+    </entry>
+
+    <entry>
+        <base>LABEL_CORPORATE_DNS_SECONDARY</base>
+        <trans>Secondary corporate DNS server</trans>
+    </entry>
+
+    <entry>
+        <base>DESC_NAMESERVERS</base>
+        <trans>You can select whether this domain is resolved locally, passed to the corporate DNS servers, or resolved by the Internet DNS servers. The default will be correct for most networks.</trans>
+    </entry>
+
+    <entry>
+        <base>LABEL_NAMESERVERS</base>
+        <trans>Domain DNS servers</trans>
+    </entry>
+
+    <entry>
+        <base>localhost</base>
+        <trans>Resolve locally</trans>
+    </entry>
+
+    <entry>
+        <base>internet</base>
+        <trans>Internet DNS servers</trans>
+    </entry>
+
+    <entry>
+        <base>corporate</base>
+        <trans>Corporate DNS servers</trans>
+    </entry>
+
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/emailsettings   1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/emailsettings    2008-10-13 00:23:10.000000000 -0600
@@ -0,0 +1,372 @@
+<lexicon lang="ja" params="getExtraParams()">
+    <!-- vim: ft=xml:
+    -->
+    <entry>
+        <base>FORM_TITLE</base>
+        <trans>E-mail settings</trans>
+    </entry>
+    <entry>
+        <base>E-mail</base>
+        <trans>E-mail</trans>
+    </entry>
+    <entry>
+        <base>SUCCESS</base>
+        <trans>The new e-mail settings have been saved.</trans>
+    </entry>
+    <entry>
+        <base>NEVER</base>
+        <trans>not at all</trans>
+    </entry>
+    <entry>
+        <base>EVERY5MIN</base>
+        <trans>Every 5 minutes</trans>
+    </entry>
+    <entry>
+        <base>EVERY15MIN</base>
+        <trans>Every 15 minutes</trans>
+    </entry>
+    <entry>
+        <base>EVERY30MIN</base>
+        <trans>Every 30 minutes</trans>
+    </entry>
+    <entry>
+        <base>EVERYHOUR</base>
+        <trans>Every hour</trans>
+    </entry>
+    <entry>
+        <base>EVERY2HRS</base>
+        <trans>Every 2 hours</trans>
+    </entry>
+    <entry>
+        <base>STANDARD</base>
+        <trans>Standard (SMTP)</trans>
+    </entry>
+    <entry>
+        <base>ETRN</base>
+        <trans>ETRN (SMTP with client request)</trans>
+    </entry>
+    <entry>
+        <base>DEFAULT</base>
+        <trans>デフォルト</trans>
+    </entry>
+    <entry>
+        <base>SPECIFY_BELOW</base>
+        <trans>Specify below</trans>
+    </entry>
+    <entry>
+        <base>MULTIDROP</base>
+        <trans>multi-drop</trans>
+    </entry>
+    <entry>
+        <base>LABEL_MODE</base>
+        <trans>E-mail retrieval mode</trans>
+    </entry>
+    <entry>
+        <base>DESC_MODE</base>
+        <trans>The e-mail retrieval mode can be set to standard (for dedicated Internet connections), ETRN (recommended for dialup connections), or multi-drop (for dialup connections if ETRN is not supported by your Internet provider). Note that multi-drop mode is the only option available when the server is configured in private server and gateway mode.</trans>
+    </entry>
+    <entry>
+        <base>LABEL_DELEGATE</base>
+        <trans>Address of internal mail server</trans>
+    </entry>
+    <entry>
+        <base>DESC_DELEGATE</base>
+        <trans><![CDATA[ <hr class="sectionbar" /><h2>Delegate mail servers</h2> Your server includes a complete, full-featured e-mail server. However, if for some reason you wish to delegate e-mail processing to another system, specify the IP address of the delegate system here. For normal operation, leave this field blank. ]]></trans>
+    </entry>
+    <entry>
+        <base>LABEL_SECONDARY</base>
+        <trans>Secondary mail server</trans>
+    </entry>
+    <entry>
+        <base>DESC_SECONDARY</base>
+        <trans><![CDATA[ <hr class="sectionbar" /><h2>ETRN or multi-drop settings</h2> For ETRN or multi-drop, specify the hostname or IP address of your secondary mail server. (If using the standard e-mail setup, this field can be left blank.) ]]></trans>
+    </entry>
+    <entry>
+        <base>DESC_FETCH_PERIOD</base>
+        <trans>For ETRN or multi-drop, you can control how frequently this server contacts your secondary e-mail server to fetch e-mail. More frequent connections mean that you receive your e-mail more quickly, but also cause Internet requests to be sent more often, possibly increasing your phone and Internet charges.</trans>
+    </entry>
+    <entry>
+        <base>LABEL_FETCH_PERIOD</base>
+        <trans>During office hours (8:00 AM to 6:00 PM) on weekdays</trans>
+    </entry>
+    <entry>
+        <base>LABEL_FETCH_PERIOD_NIGHTS</base>
+        <trans>Outside office hours (6:00 PM to 8:00 AM) on weekdays</trans>
+    </entry>
+    <entry>
+        <base>LABEL_FETCH_PERIOD_WEEKENDS</base>
+        <trans>During the weekend</trans>
+    </entry>
+    <entry>
+        <base>DESC_POP_ACCOUNT</base>
+        <trans>For multi-drop e-mail, specify the POP user account and password. (If using standard or ETRN e-mail, these fields can be blank.) Also, for multi-drop, you can either use the default mail sorting method, or you can specify a particular message header to use for mail sorting.</trans>
+    </entry>
+    <entry>
+        <base>LABEL_POP_PASS</base>
+        <trans>POP user password (for multi-drop)</trans>
+    </entry>
+
+    <entry>
+        <base>LABEL_POP_ACCOUNT</base>
+        <trans>POP user account (for multi-drop)</trans>
+    </entry>
+    <entry>
+        <base>LABEL_SORT_METHOD</base>
+        <trans>Select sort method (for multi-drop)</trans>
+    </entry>
+
+    <entry>
+        <base>LABEL_SORT_HEADER</base>
+        <trans>Select sort header (for multi-drop)</trans>
+    </entry>
+    <entry>
+        <base>LABEL_FETCH_PROTO</base>
+        <trans>Protocol (for multi-drop)</trans>
+    </entry>
+    <entry>
+        <base>LABEL_FETCH_SECURE</base>
+        <trans>Tunnel over SSL (for multi-drop)</trans>
+    </entry>
+    <entry>
+        <base>AUTO</base>
+        <trans>Automatic</trans>
+    </entry>
+    <entry>
+        <base>ENABLED_BOTH</base>
+        <trans>Allow both HTTP and HTTPS</trans>
+    </entry>
+    <entry>
+        <base>ENABLED_SECURE_ONLY</base>
+        <trans>Allow HTTPS (secure)</trans>
+    </entry>
+    <entry>
+        <base>INSECURE_POP3</base>
+        <trans>Allow both POP3 and POP3S</trans>
+    </entry>
+    <entry>
+        <base>ALLOW_PRIVATE</base>
+        <trans>Allow private</trans>
+    </entry>
+    <entry>
+        <base>SECURE_POP3</base>
+        <trans>Allow private and public (secure POP3S)</trans>
+    </entry>
+    <entry>
+        <base>INSECURE_IMAP</base>
+        <trans>Allow both IMAP and IMAPS</trans>
+    </entry>
+    <entry>
+        <base>SECURE_IMAP</base>
+        <trans>Allow private and public (secure IMAPS)</trans>
+    </entry>
+    <entry>
+        <base>INSECURE_SMTP</base>
+        <trans>Allow both SMTP and SSMTP</trans>
+    </entry>
+    <entry>
+        <base>SECURE_SMTP</base>
+        <trans>Allow SSMTP (secure)</trans>
+    </entry>
+    <entry>
+        <base>LABEL_POP_ACCESS_CONTROL</base>
+        <trans>POP3 server access</trans>
+    </entry>
+    <entry>
+        <base>LABEL_IMAP_ACCESS_CONTROL</base>
+        <trans>IMAP server access</trans>
+    </entry>
+    <entry>
+        <base>LABEL_SMTP_AUTH_CONTROL</base>
+        <trans>SMTP authentication</trans>
+    </entry>
+    <entry>
+        <base>FORWARD_TO_ADMIN</base>
+        <trans>Send to administrator</trans>
+    </entry>
+    <entry>
+        <base>FORWARD_TO</base>
+        <trans>Send to</trans>
+    </entry>
+    <entry>
+        <base>RETURN_TO_SENDER</base>
+        <trans>拒絶</trans>
+    </entry>
+    <entry>
+        <base>LABEL_UNKNOWN</base>
+        <trans>E-mail to unknown users</trans>
+    </entry>
+    <entry>
+        <base>DESC_UNKNOWN</base>
+        <trans><![CDATA[ <h2>Unknown Users</h2> Selecting Reject (recommended setting) will configure the server to only accept mail for valid email addresses (for example users, groups, pseudonyms). Mail for other addresses will be rejected. ]]></trans>
+    </entry>
+    <entry>
+        <base>LABEL_SMARTHOST</base>
+        <trans>Address of Internet provider's mail server</trans>
+    </entry>
+
+    <entry>
+        <base>DESC_SMARTHOST</base>
+        <trans><![CDATA[ <hr class="sectionbar" /><h2>SMTP server</h2> The server can deliver outgoing messages directly to their destination (recommended in most cases) or can deliver them via your Internet provider's SMTP server (recommended if you have an unreliable Internet connection or are using a residential Internet service). If using your Internet provider's SMTP server, specify its hostname or IP address below. Otherwise leave this field blank. ]]></trans>
+    </entry>
+
+    <entry>
+        <base>INVALID_SMARTHOST</base>
+        <trans>The smarthost name you entered is not a valid internet domain name and is not blank</trans>
+    </entry>
+    <entry>
+        <base>DESC_POP_ACCESS_CONTROL</base>
+        <trans>You can control POP3 server access. The setting 'Allow private' allows POP3 access only from your local network(s). The POP3S setting can be used to provide encrypted external access to your POP3 server. We recommend leaving this setting 'Allow private' unless you have a specific reason to do otherwise.</trans>
+    </entry>
+    <entry>
+        <base>DESC_IMAP_ACCESS_CONTROL</base>
+        <trans>You can control IMAP server access. The setting 'Allow private' allows IMAP access only from your local network(s). The IMAPS setting can be used to provide encrypted external access to your IMAP server. We recommend leaving this setting 'Allow private' unless you have a specific reason to do otherwise.</trans>
+    </entry>
+    <entry>
+        <base>DESC_SMTP_AUTH_CONTROL</base>
+        <trans>You can provide external authenticated relay access to your SMTP server. The SSMTP setting requires users to send their username and password encrypted to your SMTP server. Allowing external authenticated relay access should only be used by experienced administrators. Relay access is always available on the internal inteface. We recommend leaving this setting Enabled unless you have a specific reason to do otherwise.</trans>
+    </entry>
+    <entry>
+        <base>DESC_WEBMAIL</base>
+        <trans>You can enable or disable webmail on this system. Webmail allows users to access their mail through a regular web browser by pointing the browser to https://{$FQDN}/webmail, and logging in to their account.</trans>
+    </entry>
+    <entry>
+        <base>LABEL_WEBMAIL</base>
+        <trans>Webmail access</trans>
+    </entry>
+     <entry>
+        <base>LABEL_BLOCK_EXECUTABLE_CONTENT</base>
+        <trans>Executable content blocking</trans>
+     </entry>
+     <entry>
+        <base>LABEL_CONTENT_TO_BLOCK</base>
+        <trans>Content to block</trans>
+     </entry>
+     <entry>
+        <base>DESC_BLOCK_EXECUTABLE_CONTENT</base>
+        <trans>You can block executable content in e-mail attachments by highlighting the executable attachment types you wish to block. E-mail containing these attachment types will be automatically returned to the sender.</trans>
+    </entry>
+    <entry>
+        <base>UNACCEPTABLE_CHARS</base>
+        <trans>This field requires a valid e-mail address, which must include the @ symbol and a domain name.</trans>
+    </entry>
+
+    <entry>
+        <base>DESC_STATE_ACCESS</base>
+        <trans><![CDATA[ <h2>E-mail access</h2> ]]></trans>
+    </entry>
+
+    <entry>
+        <base>DESC_STATE_ACCESS_BUTTON</base>
+        <trans><![CDATA[ <a class="button-like" href="emailsettings?page=0&page_stack=&Next=Next&wherenext=EMAIL_PAGE_ACCESS">Change e-mail access settings</a> ]]></trans>
+    </entry>
+
+    <entry>
+        <base>DESC_STATE_RECEPTION</base>
+        <trans><![CDATA[ <hr class="sectionbar" /><h2>E-mail reception</h2> ]]></trans>
+    </entry>
+
+    <entry>
+        <base>DESC_STATE_RECEPTION_BUTTON</base>
+        <trans><![CDATA[ <a class="button-like" href="emailsettings?page=0&page_stack=&Next=Next&wherenext=EMAIL_PAGE_RECEPTION">Change e-mail reception settings</a> ]]></trans>
+    </entry>
+
+    <entry>
+        <base>DESC_STATE_DELIVERY</base>
+        <trans><![CDATA[ <hr class="sectionbar" /><h2>E-mail delivery</h2> ]]></trans>
+    </entry>
+
+    <entry>
+        <base>DESC_STATE_DELIVERY_BUTTON</base>
+        <trans><![CDATA[ <a class="button-like" href="emailsettings?page=0&page_stack=&Next=Next&wherenext=EMAIL_PAGE_DELIVERY">Change e-mail delivery settings</a> ]]></trans>
+    </entry>
+
+    <entry>
+        <base>DESC_STATE_FILTERING_BUTTON</base>
+        <trans><![CDATA[ <a class="button-like" href="emailsettings?page=0&page_stack=&Next=Next&wherenext=EMAIL_PAGE_FILTERING">Change e-mail filtering settings</a> ]]></trans>
+    </entry>
+    <entry>
+       <base>LABEL_VIRUS_SCAN</base>
+       <trans>Virus scanning</trans>
+    </entry>
+
+    <entry>
+       <base>DESC_VIRUS_SCAN</base>
+       <trans>You can scan incoming and outgoing e-mail for viruses. If scanning is enabled and a virus is detected, the e-mail will be rejected and returned to the sender.</trans>
+    </entry>
+
+    <entry>
+       <base>LABEL_SPAM_SCAN</base>
+       <trans>Spam filtering</trans>
+    </entry>
+
+    <entry>
+       <base>DESC_SPAM_SCAN</base>
+       <trans>You can scan e-mail for spam. If Spam filtering is enabled, an X-Spam-Status: header is added to each message, which can be used for filtering spam. You can adjust the sensitivity of the Spam detection process from the default of medium. For fine-grained control, you can set the Spam sensitivity to Custom and then choose a custom tagging level, and optionally a level at which to reject the message.</trans>
+    </entry>
+
+   <entry>
+        <base>LABEL_SPAM_SENSITIVITY</base>
+        <trans>Spam sensitivity</trans>
+    </entry>
+   <entry>
+        <base>LABEL_SPAM_TAGLEVEL</base>
+        <trans>Custom spam tagging level</trans>
+    </entry>
+    <entry>
+        <base>LABEL_SPAM_REJECTLEVEL</base>
+        <trans>Custom spam rejection level</trans>
+    </entry>
+    <entry>
+        <base>LABEL_SPAM_SUBJECTTAG</base>
+        <trans>Modify subject of spam messages</trans>
+    </entry>
+    <entry>
+        <base>LABEL_SORTSPAM</base>
+        <trans>Sort spam into junkmail folder</trans>
+    </entry>
+    <entry>
+        <base>VERYHIGH</base>
+        <trans>Very high</trans>
+    </entry>
+    <entry>
+        <base>HIGH</base>
+        <trans>High</trans>
+    </entry>
+    <entry>
+        <base>MEDIUM</base>
+        <trans>Medium</trans>
+    </entry>
+    <entry>
+        <base>LOW</base>
+        <trans>Low</trans>
+    </entry>
+    <entry>
+        <base>VERYLOW</base>
+        <trans>Very low</trans>
+    </entry>
+    <entry>
+        <base>CUSTOM</base>
+        <trans>Custom</trans>
+    </entry>
+
+    <entry>
+        <base>LABEL_SMARTHOST_SMTPAUTH_STATUS</base>
+        <trans>SMTP Authentication for Internet provider</trans>
+    </entry>
+
+    <entry>
+        <base>LABEL_SMARTHOST_SMTPAUTH_USERID</base>
+        <trans>Mail server user id</trans>
+    </entry>
+
+    <entry>
+        <base>LABEL_SMARTHOST_SMTPAUTH_PASSWD</base>
+        <trans>Mail server password</trans>
+    </entry>
+
+    <entry>
+        <base>VALIDATION_SMTPAUTH_NONBLANK</base>
+        <trans>This field cannot be left blank if SMTP Authentication is enabled.</trans>
+    </entry>
+
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/groups  1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/groups   2008-10-13 00:23:30.000000000 -0600
@@ -0,0 +1,84 @@
+<lexicon lang="ja">
+    <entry>
+        <base>FORM_TITLE</base>
+        <trans>Create, modify, or remove user groups</trans>
+    </entry>   
+    <entry>
+        <base>GROUP_TOO_LONG</base>
+        <trans>Error: group name is too long.The maximum is {$maxLength} characters.</trans>
+    </entry>    
+    <entry>
+        <base>ACCOUNT_CONFLICT</base>
+        <trans>Error: the group "{$group}" can't be created because there is already a {$type} account of that name.</trans>
+    </entry>    
+    <entry>
+        <base>INVALID_GROUP_DESCRIPTION</base>
+        <trans>Error: unexpected or missing characters in group description</trans>
+    </entry>
+    <entry>
+        <base>NO_MEMBERS</base>
+        <trans>Error: no members in group. Did not create new group.</trans>
+    </entry>
+    <entry>
+        <base>CREATED_GROUP</base>
+        <trans>Successfully created user group</trans>
+    </entry> 
+    <entry>
+        <base>DELETED_GROUP</base>
+        <trans>Successfully removed user group</trans>
+    </entry> 
+    <entry>
+        <base>MODIFIED_GROUP</base>
+        <trans>Successfully modifed user group</trans>
+    </entry>   
+    <entry>
+        <base>CREATE_ERROR</base>
+        <trans>An error occurred while creating user group.</trans>
+    </entry> 
+    <entry>
+        <base>DELETE_ERROR</base>
+        <trans>An error occurred while removing user group.</trans>
+    </entry> 
+    <entry>
+        <base>MODIFY_ERROR</base>
+        <trans>An error occurred while modifying user group.</trans>
+    </entry>   
+    <entry>
+        <base>GROUP_NAMING</base>
+        <trans><![CDATA[ The group name should contain only lower-case letters, numbers, hyphens, periods, and underscores, and should start with a lower-case letter. For example "sales", "beta5", and "reseller_partners" are all valid group names, but "3rd-event", "Marketing Team" and "lost&found" are not. ]]></trans>
+    </entry>
+    <entry>
+        <base>GROUP_HAS_MEMBERS</base>
+        <trans>This group contains the following members:</trans>
+    </entry>
+    <entry>
+        <base>NOT_A_GROUP</base>
+        <trans>Error: That is not an existing group account.</trans>
+    </entry>
+    <entry>
+        <base>GROUP_DESC</base>
+        <trans>Brief Description/Windows Group Alias</trans>
+    </entry>
+   <entry>
+        <base>GROUP_DESC_EXPL</base>
+        <trans>Input a brief group description in the field below. This field also designates the group name viewable by Windows clients.</trans>
+   </entry>
+
+
+    <entry>
+        <base>IBAYS_WILL_BE_CHANGED</base>
+        <trans>The following information bays were assigned to this group and will be changed to the Administrator group (you can change them to something else afterward):</trans>
+    </entry>
+    <entry>
+        <base>CONFIRM_DELETE_GROUP</base>
+        <trans><![CDATA[ <p><b>Are you sure you wish to remove this group?</b></p> ]]></trans>
+    </entry>
+    <entry>
+        <base>CURRENT_LIST</base>
+        <trans><![CDATA[<p>Current list of User Groups</p>]]></trans>
+    </entry>
+    <entry>
+               <base>DELETE_DESCRIPTION</base>
+               <trans><![CDATA[ You are about to remove the user group "<b>{$group}</b>." ]]></trans>
+    </entry>
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/hostentries     1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/hostentries      2008-10-13 00:23:37.000000000 -0600
@@ -0,0 +1,168 @@
+<lexicon lang="ja" params="lexicon_params()">
+    <!-- vim: ft=xml
+    -->
+    <entry>
+        <base>Hostnames and addresses</base>
+        <trans>Hostnames and addresses</trans>
+    </entry>
+    <entry>
+        <base>UNABLE_TO_OPEN_CONFIGDB</base>
+        <trans>Unable to open configuration database</trans>
+    </entry>
+    <entry>
+        <base>DNS_FORWARDER_ENABLED</base>
+        <trans>A DNS forwarder has been configured. This means that all DNS lookups will be handled by the DNS forwarder. Hostnames and addresses cannot be modified on this server while a DNS forwarder is configured.</trans>
+    </entry>
+    <entry>
+        <base>ADD_HOSTNAME</base>
+        <trans><![CDATA[ <a class="button-like" href="hostentries?page=0&page_stack=&Next=Next&wherenext=CreateModify">Add hostname</a> ]]></trans>
+    </entry>
+    <entry>
+        <base>HOSTNAME</base>
+        <trans>Hostname</trans>
+    </entry>
+    <entry>
+        <base>HOSTTYPE</base>
+        <trans>Location</trans>
+    </entry>
+    <entry>
+        <base>LOCAL_IP</base>
+        <trans>Local IP</trans>
+    </entry>
+    <entry>
+        <base>ETHERNET_ADDRESS</base>
+        <trans>Ethernet address</trans>
+    </entry>
+    <entry>
+        <base>CURRENT_HOSTNAMES_FOR_DOMAIN</base>
+        <trans>Current list of hostnames for {$domain}.</trans>
+    </entry>
+    <entry>
+        <base>NO_HOSTNAMES_FOR_SERVICENAME</base>
+        <trans>There are no hostnames in the system for {$serviceName}.</trans>
+    </entry>
+    <entry>
+        <base>CURRENT_HOSTNAMES_FOR_LOCAL_DOMAIN</base>
+        <trans>Current list of hostnames for {$localDomainName}</trans>
+    </entry>
+    <entry>
+        <base>NO_HOSTNAMES_FOR_LOCAL_DOMAIN</base>
+        <trans>There are no hostnames in the system for {$localDomainName}.</trans>
+    </entry>
+    <entry>
+        <base>STATIC_HOST_MESSAGE</base>
+        <trans>- This host represents your system name and cannot be modified or removed.</trans>
+    </entry>
+    <entry>
+        <base>CREATE_LOCAL_HOST_TITLE</base>
+        <trans>Create a new hostname for this server</trans>
+    </entry>
+    <entry>
+        <base>HOSTNAME_VALIDATION_ERROR</base>
+        <trans>Error: unexpected characters in host name: "{$HostName}". The host name should contain only letters, numbers, and hyphens and must start with a letter or a number.</trans>
+    </entry>
+    <entry>
+        <base>HOSTNAME_LENGTH_ERROR</base>
+        <trans>Error: account name {$HostName} is too long. The maximum is 32 characters.</trans>
+    </entry>
+    <entry>
+        <base>DOMAIN_VALIDATION_ERROR</base>
+        <trans>Error: unexpected or missing characters in domain name {$DomainName}. The domain name should contain one or more letters, numbers, periods and minus signs. Did not create new domain.</trans>
+    </entry>
+    <entry>
+        <base>HOSTNAME_EXISTS_ERROR</base>
+        <trans>Error: account {$fullHostName} is an existing {$type} hostname.</trans>
+    </entry>
+    <entry>
+        <base>SUCCESSFULLY_CREATED</base>
+        <trans>Successfully created hostname.</trans>
+    </entry>
+    <entry>
+        <base>HOSTNAME_DESCRIPTION</base>
+        <trans>The hostname must contain only letters, numbers, and hyphens, and must start with a letter or number.</trans>
+    </entry>
+    <entry>
+        <base>LOCAL_IP_DESCRIPTION</base>
+        <trans>The Local IP address is the IP address of another machine on the local network. Please enter a valid IP address in the format "aaa.bbb.ccc.ddd".</trans>
+    </entry>
+    <entry>
+        <base>ETHERNET_ADDRESS_DESCRIPTION</base>
+        <trans>The ethernet address is optional and causes the DHCP server to statically bind the local IP address to the computer with this ethernet address. If specified, it must be of the form "AA:BB:CC:DD:EE:FF" and must contain only the numbers 0-9 and the letters A-F.</trans>
+    </entry>
+    <entry>
+        <base>CREATE_LOCAL_HOST_TITLE</base>
+        <trans>Create a new hostname referring to a local host.</trans>
+    </entry>
+    <entry>
+        <base>DIDNT_ENTER_LOCAL_IP</base>
+        <trans>Error: You did not specify a Local IP address. IP addresses must contain only numbers and periods and be in the form "aaa.bbb.ccc.ddd". Did not create hostname.</trans>
+    </entry>
+    <entry>
+        <base>IP_VALIDATION_ERROR</base>
+        <trans>Error: IP Address {$InternalIP} is invalid. IP Addresses must contain only numbers and periods and be in the form "aaa.bbb.ccc.ddd". Did not create hostname.</trans>
+    </entry>
+    <entry>
+        <base>MAC_ADDRESS_VALIDATION_ERROR</base>
+        <trans>Error: Ethernet address {$MACAddress} is invalid. Ethernet addresses must be in the form "AA:BB:CC:DD:EE:FF" and only contain the numbers 0-9 and the letters A-F. Did not create hostname.</trans>
+    </entry>
+    <entry>
+        <base>CREATE_REMOTE_HOST_TITLE</base>
+        <trans>Create a new hostname referring to a remote host</trans>
+    </entry>
+    <entry>
+        <base>CREATE_TITLE</base>
+        <trans>Create or modify hostname</trans>
+    </entry>
+    <entry>
+        <base>LOCAL_PAGE_DESCRIPTION</base>
+        <trans>Please enter the following additional details for a local host:</trans>
+    </entry>
+    <entry>
+        <base>REMOTE_PAGE_DESCRIPTION</base>
+        <trans>Please enter the following additional details for a remote host:</trans>
+    </entry>
+    <entry>
+        <base>SUCCESSFULLY_DELETED</base>
+        <trans>Successfully deleted host.</trans>
+    </entry>
+    <entry>
+        <base>SUCCESSFULLY_MODIFIED</base>
+        <trans>Successfully modified host.</trans>
+    </entry>
+    <entry>
+        <base>REMOVE_PAGE_DESCRIPTION</base>
+        <trans><![CDATA[ You are about to remove the hostname "{$hostname}.{$domain}". </p> <p> <b>Are you sure you wish to remove this hostname?</b> ]]></trans>
+    </entry>
+    <entry>
+        <base>CONFIRM_DESCRIPTION</base>
+        <trans>Please confirm the following details.</trans>
+    </entry>
+    <entry>
+        <base>NO_HOSTS_FOR_THIS_DOMAIN</base>
+        <trans>There are no hosts for this domain.</trans>
+    </entry>
+    <entry>
+        <base>ADDR_IN_DHCP_RANGE</base>
+        <trans>Address is inside the DHCP assigned dynamic range</trans>
+    </entry>
+    <entry>
+        <base>ERROR_WHILE_CREATING_HOST</base>
+        <trans>Error occurred while creating hostname.</trans>
+    </entry>
+    <entry>
+        <base>ERROR_WHILE_MODIFYING_HOST</base>
+        <trans>Error occurred while modifying hostname.</trans>
+    </entry>
+    <entry>
+        <base>ERROR_WHILE_DELETING_HOST</base>
+        <trans>Error occurred while deleting hostname.</trans>
+    </entry>
+    <entry>
+        <base>ERR_IP_IS_LOCAL_OR_GATEWAY</base>
+        <trans>Error: IP cannot be server IP or Gateway IP.</trans>
+    </entry>
+    <entry>
+        <base>ERR_IP_NOT_LOCAL</base>
+        <trans>Error: This IP address is not on any of our local networks.</trans>
+    </entry>
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/ibays   1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/ibays    2008-10-13 00:23:44.000000000 -0600
@@ -0,0 +1,170 @@
+<lexicon lang="ja" params="getExtraParams()">
+    <entry>
+        <base>FORM_TITLE</base>
+        <trans>Create, modify, or remove i-bays</trans>
+    </entry>
+    <entry>
+        <base>FIRSTPAGE_DESC</base>
+        <trans><![CDATA[ <p> <a class="button-like" href="ibays?page=0&page_stack=&Next=Next&wherenext=CreateModify">Add i-bay</a> </p> <p> You can remove any information bay or reset its password by clicking on the corresponding command next to the information bay. If the information bay shows up in red, that means that the password has not yet been changed from the default, and should be changed soon. </p> ]]></trans>
+    </entry>
+    <entry>
+        <base>ADD_TITLE</base>
+        <trans>Create or modify an i-bay</trans>
+    </entry>
+    <entry>
+        <base>NAME_FIELD_DESC</base>
+        <trans>The information bay name should contain only lower-case letters, numbers, periods, hyphens and underscores, and should start with a lower-case letter. For example "johnson", "intra", and "cust3.prj12" are all valid names, but "3associates", "John Smith" and "Bus!Partner" are not. The name is limited to {$maxLength} characters.</trans>
+    </entry>
+    <entry>
+        <base>NAME_LABEL</base>
+        <trans>Information bay name</trans>
+    </entry>
+    <entry>
+        <base>USER_ACCESS</base>
+        <trans>User access via file sharing or user ftp</trans>
+    </entry>
+    <entry>
+        <base>PUBLIC_ACCESS</base>
+        <trans>Public access via web or anonymous ftp</trans>
+    </entry>
+    <entry>
+        <base>PUBLIC_ACCESS_DESCRIPTION</base>
+        <trans>The public access mode "password required outside local network" is not supported by the FTP server component. If you select this mode, the FTP server will require a password both inside and outside the local network for this i-bay.</trans>
+    </entry>
+    <entry>
+        <base>ALLOW_DYNAMIC_CONTENT</base>
+        <trans>Execution of dynamic content (CGI, PHP, SSI)</trans>
+    </entry>
+    <entry>
+        <base>REMOVE_TITLE</base>
+        <trans>Remove information bay</trans>
+    </entry>
+    <entry>
+        <base>REMOVE_DESC</base>
+        <trans><![CDATA[ <p> You are about to remove the information bay "{$name}" ({$description}). </p> <p> All files belonging to this information bay will be deleted. </p> <p> Are you sure you wish to remove this information bay? </p> ]]></trans>
+    </entry>
+    <entry>
+        <base>ERROR_WHILE_CREATING_IBAY</base>
+        <trans>An error occurred while creating the i-bay.</trans>
+    </entry>
+    <entry>
+        <base>SUCCESSFULLY_CREATED_IBAY</base>
+        <trans>Successfully created i-bay.</trans>
+    </entry>
+    <entry>
+        <base>NO_IBAYS</base>
+        <trans>There are no i-bays currently configured.</trans>
+    </entry>
+    <entry>
+        <base>CANT_FIND_IBAY</base>
+        <trans>Can't find account for {$name} (does it exist?)</trans>
+    </entry>
+    <entry>
+        <base>CANT_CREATE_IBAY</base>
+        <trans>Can't create new account for {$name} (does it already exist?)</trans>
+    </entry>
+    <entry>
+        <base>ERROR_WHILE_MODIFYING_IBAY</base>
+        <trans>An error occurred while modifying the i-bay.</trans>
+    </entry>
+    <entry>
+        <base>SUCCESSFULLY_MODIFIED_IBAY</base>
+        <trans>Successfully modified i-bay.</trans>
+    </entry>
+    <entry>
+        <base>VIRTUAL_HOST_MESSAGE</base>
+        <trans>The following virtual domains were using this information bay as their content and will be changed to the primary web site (you can change them to something else afterward).</trans>
+    </entry>
+    <entry>
+        <base>SUCCESSFULLY_DELETED_IBAY</base>
+        <trans>Successfully deleted i-bay.</trans>
+    </entry>
+    <entry>
+        <base>ERROR_WHILE_DELETING_IBAY</base>
+        <trans>An error occurred while deleting the i-bay.</trans>
+    </entry>
+    <entry>
+        <base>PASSWORD_DESC</base>
+        <trans>You are about to change the password for the i-bay {$name}.</trans>
+    </entry>
+    <entry>
+        <base>IBAY_PASSWD_VALIDATION_ERROR</base>
+        <trans>The password may contain only letters and numbers.</trans>
+    </entry>
+    <entry>
+        <base>IBAY_PASSWD_VERIFY_ERROR</base>
+        <trans>The passwords do not match.</trans>
+    </entry>
+    <entry>
+        <base>SUCCESSFULLY_RESET_PASSWORD</base>
+        <trans>Successfully reset password.</trans>
+    </entry>
+    <entry>
+        <base>ERROR_WHILE_RESETTING_PASSWORD</base>
+        <trans>Error while resetting password.</trans>
+    </entry>
+    <entry>
+        <base>VHOST_MESSAGE</base>
+        <trans><![CDATA[ <P>The following virtual domains were using this information bay as their content and will be changed to the primary web site (you can change them to something else afterward):</P> <ul>{$vhostList}</ul> ]]></trans>
+    </entry>
+    <entry>
+        <base>Information bays</base>
+        <trans>Information bays</trans>
+    </entry>
+    <entry>
+        <base>WGRG</base>
+        <trans>Write = group, Read = group</trans>
+    </entry>
+    <entry>
+        <base>WGRE</base>
+        <trans>Write = group, Read = everyone</trans>
+    </entry>
+    <entry>
+        <base>WARG</base>
+        <trans>Write = admin, Read = group</trans>
+    </entry>
+    <entry>
+        <base>NONE</base>
+        <trans>No access</trans>
+    </entry>
+    <entry>
+        <base>LOCAL_NETWORK_NO_PASSWORD</base>
+        <trans>Local network (no password required)</trans>
+    </entry>
+    <entry>
+        <base>LOCAL_NETWORK_PASSWORD</base>
+        <trans>Local network (password required)</trans>
+    </entry>
+    <entry>
+        <base>ENTIRE_INTERNET_NO_PASSWORD</base>
+        <trans>Entire Internet (no password required)</trans>
+    </entry>
+    <entry>
+        <base>ENTIRE_INTERNET_PASSWORD</base>
+        <trans>Entire Internet (password required)</trans>
+    </entry>
+    <entry>
+        <base>ENTIRE_INTERNET_PASSWORD_REMOTE</base>
+        <trans>Entire Internet (password required outside local network)</trans>
+    </entry>
+    <entry>
+        <base>INVALID_IBAY_DESCRIPTION</base>
+        <trans>Error: unexpected or missing characters in i-bay description</trans>
+    </entry>
+    <entry>
+        <base>ACCT_NAME_HAS_INVALID_CHARS</base>
+        <trans>The i-bay name "{$acctName}" contains invalid characters. I-bay names must start with a lower case letter and contain only lower case letters, numbers, and hyphens.</trans>
+    </entry>
+    <entry>
+        <base>MAX_IBAY_NAME_LENGTH_ERROR</base>
+        <trans>The i-bay name "{$name}" is too long. The maximum is {$maxIbayNameLength} characters.</trans>
+    </entry>
+    <entry>
+        <base>ACCT_CLASHES_WITH_PSEUDONYM</base>
+        <trans><![CDATA[ The account "{$acctName}" clashes with pseudonym details for {$acctType} account "{$acct}". <p>{$acctName} is a pseudonym for {$acct}.</p> ]]></trans>
+    </entry>
+    <entry>
+        <base>ACCOUNT_EXISTS</base>
+        <trans>The account "{$acctName}" is an existing {$acctType} account.</trans>
+    </entry>
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/initial.cgi     1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/initial.cgi      2008-10-13 00:23:49.000000000 -0600
@@ -0,0 +1,16 @@
+<lexicon lang="ja">
+    <entry>
+       <base>FORM_TITLE</base>
+       <trans>Welcome to the server manager</trans>
+    </entry>
+
+    <entry>
+       <base>FRAMES_BODY</base>
+       <trans><![CDATA[ <p> Welcome to SME Server, the leading Linux distribution for small and medium enterprises. SME Server is brought to you by <A HREF="http://www.smeserver.org/" TARGET="_blank">SME Server, Inc.</A>, a non-profit corporation that exists to provide marketing and legal support for SME Server. </p> <p> SME Server is freely available under the GNU General Public License and is only possible through the efforts of the SME Server community. However, the availability and quality of SME Server is dependent on meeting our expenses, such as hosting costs, server hardware, etc. </p> <p> As such, we ask for a small donation to offset costs and fund further development. </p> <p> <b> Please visit <A HREF="http://www.smeserver.org/donate/" TARGET="_blank">http://www.smeserver.org/donate/</A> to donate. </b></P> <p> This software comes with ABSOLUTELY NO WARRANTY. Please <A HREF="/server-manager/support/" TARGET="main">click here</A> to view detailed support, warranty and licensing information. </p> <p> To perform a system administration function, click one of the links in the menu on the left of your screen. </p> ]]></trans>
+    </entry>
+
+    <entry>
+       <base>NOFRAMES_BODY</base>
+       <trans><![CDATA[ <p> Welcome to the SME Server. This software comes with ABSOLUTELY NO WARRANTY. Please <A HREF="/server-manager/support/" TARGET="main">click here</A> to view detailed support, warranty and licensing information. </p> <p> <A HREF="/server-manager/noframes">Click here</A> for a list of system administration functions. </p> ]]></trans>
+    </entry>
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/localnetworks   1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/localnetworks    2008-10-13 00:23:54.000000000 -0600
@@ -0,0 +1,108 @@
+<lexicon lang="ja">
+    <!-- vim: ft=xml:
+    -->
+    <entry>
+        <base>Local networks</base>
+        <trans>Local networks</trans>
+    </entry>
+    <entry>
+        <base>FIRSTPAGE_DESC</base>
+        <trans><![CDATA[ For security reasons, several services on your server are available only to your local network. However you can grant these local access privileges to additional networks by listing them below. Most installations should leave this list empty.</P><P> <a class="button-like" href="localnetworks?page=0&page_stack=&Next=Next&wherenext=Add">Add network</a> ]]></trans>
+    </entry>
+    <entry>
+        <base>ADD_TITLE</base>
+        <trans>Add a local network</trans>
+    </entry>
+    <entry>
+        <base>ADD_DESC</base>
+        <trans><![CDATA[ Each parameter must be in the form #.#.#.# (each # is a number from 0 to 255). The server software will zero out the ending (host identifier) part of the network address according to the subnet mask, to ensure that the network address is valid. </P><P> "Router" should be the IP address of the router on your local network via which the additional network is reached. ]]></trans>
+    </entry>
+    <entry>
+        <base>NETWORK_ADDRESS</base>
+        <trans>Network address</trans>
+    </entry>
+    <entry>
+        <base>SUBNET_MASK</base>
+        <trans>Subnet mask</trans>
+    </entry>
+    <entry>
+        <base>INVALID_IP_ADDRESS</base>
+        <trans>Invalid IP address</trans>
+    </entry>
+    <entry>
+        <base>INVALID_SUBNET_MASK</base>
+        <trans>Invalid subnet mask</trans>
+    </entry>
+    <entry>
+        <base>REMOVE_TITLE</base>
+        <trans>Remove local network</trans>
+    </entry>
+    <entry>
+        <base>REMOVE_DESC</base>
+        <trans>You are about to remove the following local network.</trans>
+    </entry>
+    <entry>
+        <base>REMOVE_CONFIRM</base>
+        <trans>Are you sure you wish to remove this network?</trans>
+    </entry>
+    <entry>
+        <base>DEFAULT</base>
+        <trans>default</trans>
+    </entry>
+    <entry>
+        <base>NUMBER_OF_HOSTS</base>
+        <trans>Number of hosts</trans>
+    </entry>
+    <entry>
+        <base>NOT_ACCESSIBLE_FROM_LOCAL_NETWORK</base>
+        <trans>Error: router address {$networkRouter} is not accessible from local network. Did not add network.</trans>
+    </entry>
+    <entry>
+        <base>NETWORK_ALREADY_LOCAL</base>
+        <trans>Error: network {$network} (derived from network {$networkAddress} and subnet mask {$networkMask}) is already considered local. Did not add new network.</trans>
+    </entry>
+    <entry>
+        <base>NETWORK_ALREADY_ADDED</base>
+        <trans>Error: network {$network} (derived from network {$networkAddress} and subnet mask {$networkMask}) has already been added. Did not add new network.</trans>
+    </entry>
+    <entry>
+        <base>ERROR_CREATING_NETWORK</base>
+        <trans>Error occurred while creating network.</trans>
+    </entry>
+    <entry>
+        <base>SUCCESS</base>
+        <trans>Successfully added network {$network}/{$networkMask} via router {$networkRouter}.</trans>
+    </entry>
+    <entry>
+        <base>SUCCESS_SINGLE_ADDRESS</base>
+        <trans>Successfully added network {$network}/{$networkMask} via router {$networkRouter}. Your server will grant local access privileges to the single IP address {$network}.</trans>
+    </entry>
+    <entry>
+        <base>SUCCESS_NETWORK_RANGE</base>
+        <trans>Successfully added network {$network}/{$networkMask} via router {$networkRouter}. Your server will grant local access privileges to {$totalHosts} IP addresses in the range {$firstAddr} to {$lastAddr}.</trans>
+    </entry>
+    <entry>
+        <base>SUCCESS_NONSTANDARD_RANGE</base>
+        <trans><![CDATA[ <p> Successfully added network {$network}/{$networkMask} via router {$networkRouter}. </p> <p> Your server will grant local access privileges to {$totalHosts} IP addresses in the range {$firstAddr} to {$lastAddr}. </p> <p> Warning: the ProFTPd FTP server cannot handle this nonstandard subnet mask. The simpler specification <b>{$simpleMask}</b> will be used instead. </p> ]]></trans>
+    </entry>
+    <entry>
+        <base>SUCCESS_REMOVED_NETWORK</base>
+        <trans>Successfully removed network {$network}/{$networkMask} via router {$networkRouter}.</trans>
+    </entry>
+    <entry>
+        <base>ERROR_DELETING_NETWORK</base>
+        <trans>Error occurred while deleting network.</trans>
+    </entry>
+    <entry>
+        <base>NO_ADDITIONAL_NETWORKS</base>
+        <trans>No additional networks</trans>
+    </entry>
+    <entry>
+        <base>REMOVE_HOSTS_DESC</base>
+        <trans>Local hosts configured on the network you are about to remove have been detected. By default, they will also be removed. Uncheck this box if, for some reason, you do not wish this to happen. Note that they will not be treated as local, and may not even be reachable, after this network is removed.</trans>
+    </entry>
+    <entry>
+        <base>REMOVE_HOSTS_LABEL</base>
+        <trans>Remove hosts on network</trans>
+    </entry>
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/online-manual   1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/online-manual    2008-10-13 00:23:59.000000000 -0600
@@ -0,0 +1,15 @@
+<lexicon lang="ja">
+      <entry>
+       <base>FORM_TITLE</base>
+       <trans>Online manual and other documentation</trans>
+      </entry> 
+      <entry> 
+       <base>DESCRIPTION</base>
+       <trans><![CDATA[ <ul> <li><a target="new" href="http://contribs.org/documentation/manual/"> Online manual</a> <li><a target="new" href="http://contribs.org/documentation/FAQ/"> FAQs</a> </ul> <H2>Support and licensing</H2> This software is released under the terms listed in the <a href="/server-manager/cgi-bin/support"> Support and Licensing</a> page. ]]></trans>
+      </entry>         
+      <entry>
+       <base>Online manual</base>
+       <trans>Online manual</trans>
+      </entry>
+
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/portforwarding  1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/portforwarding   2008-10-13 00:24:04.000000000 -0600
@@ -0,0 +1,94 @@
+<lexicon lang="ja">
+    <entry>
+        <base>FORM_TITLE</base>
+        <trans>Configure Port Forwarding</trans>
+    </entry>
+    <entry>
+        <base>FIRST_PAGE_DESCRIPTION</base>
+        <trans><![CDATA[ <p> You can use this panel to modify your firewall rules so as to open a specific port on this server and forward it to another port on another host. Doing so will permit incoming traffic to directly access a private host on your LAN. </p> <p> WARNING: Misuse of this feature can seriously compromise the security of your network. Do not use this feature lightly, or without fully understanding the implications of your actions. </p> ]]></trans>
+    </entry>
+    <entry>
+        <base>CREATE_RULE</base>
+        <trans>Create portforwarding rule</trans>
+    </entry>
+    <entry>
+        <base>SUMMARY_ADD_DESC</base>
+        <trans>The following summarizes the port-forwarding rule that you are about to add. If you are satisfied with the rule, click the &quot;Add&quot; button. If you are not, click the &quot;Cancel&quot; button.</trans>
+    </entry>
+    <entry>
+        <base>SUMMARY_REMOVE_DESC</base>
+        <trans>The following summarizes the port-forwarding rule that you are about to remove. If you are sure you want to remove the rule, click the &quot;Remove&quot; button. If not, click the &quot;Cancel&quot; button.</trans>
+    </entry>
+    <entry>
+        <base>SHOW_FORWARDS</base>
+        <trans>Below you will find a table summarizing the current port-forwarding rules installed on this server. Click on the &quot;Remove&quot; link to remove the corresponding rule.</trans>
+    </entry>
+    <entry>
+        <base>NO_FORWARDS</base>
+        <trans>There are currently no forwarded ports on the system.</trans>
+    </entry>
+    <entry>
+        <base>CREATE_PAGE_DESCRIPTION</base>
+        <trans><![CDATA[ <p>Select the protocol, the port you wish to forward, the destination host, and the port on the destination host that you wish to forward to. If you wish to specify a port range, enter the lower and upper boundaries separated by a hyphen. The destination port may be left blank, which will instruct the firewall to leave the source port unaltered.</p> ]]></trans>
+    </entry>
+    <entry>
+        <base>LABEL_SOURCE_PORT</base>
+        <trans>Source Port(s)</trans>
+    </entry>
+    <entry>
+        <base>LABEL_PROTOCOL</base>
+        <trans>Protocol</trans>
+    </entry>
+    <entry>
+        <base>LABEL_DESTINATION_PORT</base>
+        <trans>Destination Port(s)</trans>
+    </entry>
+    <entry>
+        <base>LABEL_DESTINATION_HOST</base>
+        <trans>Destination Host IP Address</trans>
+    </entry>
+    <entry>
+        <base>Port forwarding</base>
+        <trans>Port forwarding</trans>
+    </entry>
+    <entry>
+        <base>SUCCESS</base>
+        <trans>Your change to the port forwarding rules has been successfully saved.</trans>
+    </entry>
+    <entry>
+        <base>ERR_NO_MASQ_RECORD</base>
+        <trans>Cannot retrieve masq record from the configuration database.</trans>
+    </entry>
+    <entry>
+        <base>ERR_UNSUPPORTED_MODE</base>
+        <trans>Unsupported mode.</trans>
+    </entry>
+    <entry>
+        <base>ERR_CANNOT_REMOVE_NORULE</base>
+        <trans>Cannot remove non-existant rule.</trans>
+    </entry>
+    <entry>
+        <base>ERR_NONZERO_RETURN_EVENT</base>
+        <trans>Event returned a non-zero return value.</trans>
+    </entry>
+    <entry>
+        <base>ERR_BADPORT</base>
+        <trans>The ports must be a positive integer less than 65536.</trans>
+    </entry>
+    <entry>
+        <base>ERR_BADIP</base>
+        <trans>This does not appear to be an IP address. You must use dotted-quad notation, and each of the four numbers should be less than 256. ie: 192.168.0.5</trans>
+    </entry>
+    <entry>
+        <base>ERR_DUPRULE</base>
+        <trans>This rule has already been added, it cannot be added twice.</trans>
+    </entry>
+    <entry>
+        <base>ERR_PORT_COLLISION</base>
+        <trans>ERROR: This port or port range conflicts with an existing rule. Please modify this new rule, or remove the old rule.</trans>
+    </entry>
+    <entry>
+        <base>IN_SERVERONLY</base>
+        <trans>This server is currently in serveronly mode and portforwarding is not possible.</trans>
+    </entry>
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/printers        1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/printers 2008-10-13 00:24:11.000000000 -0600
@@ -0,0 +1,147 @@
+<lexicon lang="ja">
+    <entry>
+      <base>FORM_TITLE</base>
+      <trans>Add or remove printers</trans>
+    </entry>
+    <entry>
+      <base>INITIAL_DESC</base>
+      <trans><![CDATA[ <P><A class="button-like" HREF="printers?page=0&Next=Add">Add printer</A></P> ]]></trans>
+    </entry>
+    <entry>
+      <base>NO_PRINTERS</base>
+      <trans>There are no printers in the system.</trans>
+    </entry>
+    <entry>
+      <base>CURRENT_LIST</base>
+      <trans>Current List of printers</trans>
+    </entry>
+    <entry>
+      <base>REMOTE_ADDRESS</base>
+      <trans>Remote address</trans>
+    </entry>
+    <entry>
+      <base>REMOTE_NAME</base>
+      <trans>Remote name</trans>
+    </entry>
+    <entry>
+      <base>CREATE_NEW_PRINTER</base>
+      <trans>Create a new printer</trans>
+    </entry>
+    <entry>
+      <base>CREATE_NEW_DESC</base>
+      <trans>Please choose a unique name for the printer and enter a brief description. The printer name should contain only lower-case letters and numbers, and should start with a lower-case letter. For example "hplaser", "epsonlp", and "canonbj" are valid choices, but "HP Laser Jet", "Canon BubbleJet", and "HP JetDirect Printer" are not. Avoid names and descriptions that contain these terms, "offline", "disabled", "down", "off", "waiting", "jam", "paper", "error" and "responding".</trans>
+    </entry>
+    <entry>
+      <base>PRINTER_NAME</base>
+      <trans>Printer name</trans>
+    </entry>
+    <entry>
+      <base>LOCAL_PRINTER_0</base>
+      <trans>Local printer port 0 (LPT1)</trans>
+    </entry>
+    <entry>
+      <base>LOCAL_PRINTER_1</base>
+      <trans>Local printer port 1 (LPT2)</trans>
+    </entry>
+    <entry>
+      <base>LOCAL_PRINTER_2</base>
+      <trans>Local printer port 2 (LPT3)</trans>
+    </entry>
+    <entry>
+      <base>NET_PRINTER</base>
+      <trans>Network printer ...</trans>
+    </entry>
+    <entry>
+      <base>FIRST_USB_PRINTER</base>
+      <trans>First USB attached printer</trans>
+    </entry>
+    <entry>
+      <base>SECOND_USB_PRINTER</base>
+      <trans>Second USB attached printer</trans>
+    </entry>
+    <entry>
+      <base>ERR_UNEXPECTED_NAME</base>
+      <trans><![CDATA[ <P>Error: unexpected characters in printer name.</P> <P>The printer name should contain only lower-case letters and numbers, and should start with a lower-case letter. For example "hplaser", "epsonlp", and "canonbj" are valid names.</P> ]]></trans>
+    </entry>
+    <entry>
+      <base>ERR_UNEXPECTED_DESC</base>
+      <trans>Error: unexpected or missing characters in description. Did not create new printer.</trans>
+    </entry>
+    <entry>
+      <base>ERR_EXISTS</base>
+      <trans>Error: An account with the same name exists with type:</trans>
+    </entry>
+    <entry>
+      <base>ERR_INVALID_ADDRESS</base>
+      <trans>Error: invalid network address. Did not create new printer.</trans>
+    </entry>
+    <entry>
+      <base>ERR_INVALID_REMOTE_NAME</base>
+      <trans>Error: invalid network printer name. Did not create new printer.</trans>
+    </entry>
+    <entry>
+      <base>ERR_CREATING</base>
+      <trans>Error occurred while creating printer.</trans>
+    </entry>
+    <entry>
+      <base>CREATED_SUCCESSFULLY</base>
+      <trans>Successfully created printer:</trans>
+    </entry>
+    <entry>
+      <base>CREATE_NETWORK_PRINTER</base>
+      <trans>Create a new network printer</trans>
+    </entry>
+    <entry>
+      <base>ERR_OPENING_DB</base>
+      <trans>Error occurred while opening accounts database.</trans>
+    </entry>
+    <entry>
+      <base>CREATE_NETWORK_DESC</base>
+      <trans>Please enter the address and name of the network printer</trans>
+    </entry>
+    <entry>
+      <base>HOSTNAME_OR_IP</base>
+      <trans>Hostname or IP address of the network printer</trans>
+    </entry>
+    <entry>
+      <base>REMOTE_NAME_DESC</base>
+      <trans><![CDATA[ Network printer name (enter raw if not sure) ]]></trans>
+    </entry>
+    <entry>
+      <base>REMOVE_PRINTER</base>
+      <trans>Remove printer</trans>
+    </entry>
+    <entry>
+      <base>ABOUT_TO_REMOVE</base>
+      <trans>You are about to remove the printer:</trans>
+    </entry>
+    <entry>
+      <base>SPOOL_FILE_WARNING</base>
+      <trans>All the spool files for this printer will be deleted.</trans>
+    </entry>
+    <entry>
+      <base>ARE_YOU_SURE</base>
+      <trans>Are you sure you wish to remove this printer?</trans>
+    </entry>
+    <entry>
+      <base>ERR_INTERNAL_FAILURE</base>
+      <trans>Error: internal failure while removing printer:</trans>
+    </entry>
+    <entry>
+      <base>ERR_DELETING</base>
+      <trans>Error occurred while deleting printer.</trans>
+    </entry>
+    <entry>
+      <base>DELETED_SUCCESSFULLY</base>
+      <trans>Successfully deleted printer:</trans>
+    </entry>
+    <entry>
+        <base>MUST_BE_VALID_HOSTNAME_OR_IP</base>
+        <trans>Must be a valid hostname or IP number</trans>
+    </entry>
+    <entry>
+       <base>Printers</base>
+       <trans>Printers</trans>
+    </entry>
+
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/proxy   1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/proxy    2008-10-13 00:24:16.000000000 -0600
@@ -0,0 +1,38 @@
+<lexicon lang="ja">
+    <entry>
+        <base>Proxy settings</base>
+        <trans>Proxy settings</trans>
+    </entry>
+    <entry>
+        <base>FIRST_PAGE_DESCRIPTION</base>
+        <trans>This page allows configuration of the server's proxy settings. The server includes a transparent proxy and cache for HTTP traffic. This is enabled by default, but not enforced if the server is in &quot;serveronly&quot; mode. If this server is acting as an e-mail server, connections from local network clients to external SMTP servers will default to being redirected to the local e-mail server.</trans>
+    </entry>
+    <entry>
+        <base>HTTP_PROXY_STATUS_DESCRIPTION</base>
+        <trans>The server's HTTP proxy works to reduce overall uplink usage by caching recently-visited pages. It is transparent to web browsers using this server as their gateway. Enable or disable this proxy with the following toggle.</trans>
+    </entry>
+    <entry>
+        <base>HTTP_PROXY_STATUS_LABEL</base>
+        <trans>HTTP proxy status</trans>
+    </entry>
+    <entry>
+        <base>SMTP_PROXY_STATUS_DESCRIPTION</base>
+        <trans>The server's transparent SMTP proxy works to reduce virus traffic from infected client hosts by forcing all outgoing SMTP traffic through this server. If you wish to use an alternate SMTP server, and this server is your gateway to it, disable this proxy.</trans>
+    </entry>
+    <entry>
+        <base>SMTP_PROXY_STATUS_LABEL</base>
+        <trans>SMTP proxy status</trans>
+    </entry>
+    <entry>
+        <base>ERR_PROXY_UPDATE_FAILED</base>
+        <trans>ERROR: The proxy-update event returned an error.</trans>
+    </entry>
+    <entry>
+        <base>ERR_NO_SQUID_REC</base>
+        <trans>ERROR: There is no squid record in the configuration database.</trans>
+    </entry>
+    <entry>
+        <base>SUCCESS</base>
+        <trans>The new proxy settings were applied successfully.</trans>
+    </entry>
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/pseudonyms      1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/pseudonyms       2008-10-13 00:24:22.000000000 -0600
@@ -0,0 +1,114 @@
+<lexicon lang="ja">
+    <entry>
+      <base>NO_PSEUDONYMS</base>
+      <trans><![CDATA[ <b>There are no pseudonyms in the system.</b> ]]></trans>
+     </entry>
+    <entry>
+        <base>REMOVE_PSEUDONYM</base>
+        <trans>Remove pseudonym</trans>
+    </entry>
+    <entry>
+        <base>ABOUT_TO_REMOVE</base>
+        <trans><![CDATA[ You are about to remove the pseudonym:<br> <b>Are you sure you wish to continue?</b> ]]></trans>
+    </entry>
+    <entry>
+        <base>FORM_TITLE</base>
+        <trans>Create, modify, or remove pseudonyms</trans>
+    </entry>
+    <entry>
+        <base>DESCRIPTION</base>
+        <trans><![CDATA[ <p>The server automatically creates an e-mail alias for each group. If you want to define an e-mail alias for a list of users, simply create a group and the list will automatically be maintained by the server.</p> <p>Pseudonyms allow you to create other names for existing users or groups. For example, you may wish to create a pseudonym "webmaster" for your "webdevelopers" group or a pseudonym "joe" for the user "joseph".</p> <p>The server automatically creates pseudonyms of the form firstname.lastname and firstname_lastname for every user on the system and a pseudonym "everyone" which contains all users on the system.</p> <p>Pseudonyms also allow you to create e-mail aliases for valid (virtual) domains & users. For example you can forward "sales@virtualdomain1.com" to user "mary" and "sales@virtualdomain2.com" to user "john". You must create the domains and user accounts before creating the email aliases.</p> <p>Pseudonyms can also forward to other pseudonyms, although this is limited to one further level. For example the pseudonym "webmaster" can forward to the pseudonym "techsupport" which then forwards to a specified user "ray". This is useful where one user is responsible for multiple roles and saves having to change the pseudonym's associated with that user many times in the event that the user departs the organisation.</p> <p>You can modify or remove a pseudonym by clicking on the corresponding command next to the pseudonym.</p>]]></trans>
+    </entry>
+    <entry>
+        <base>LOCAL_ONLY</base>
+        <trans>(local network only)</trans>
+    </entry>
+    <entry>
+        <base>SELECT_ACCOUNT</base>
+        <trans>Select account or group</trans>
+    </entry>
+    <entry>
+        <base>SELECT_INTERNAL</base>
+        <trans>Local network only</trans>
+    </entry>
+    <entry>
+        <base>CLICK_TO_CREATE</base>
+        <trans>Add pseudonym</trans>
+    </entry>
+    <entry>
+        <base>PSEUDONYM</base>
+        <trans>Pseudonym</trans>
+    </entry>
+    <entry>
+        <base>USER_OR_GROUP</base>
+        <trans>User or group</trans>
+    </entry>
+    <entry>
+        <base>CURRENT_PSEUDONYMS</base>
+        <trans><![CDATA[<b>Current List of Pseudonyms</b>]]></trans>
+    </entry>
+    <entry>
+        <base>TITLE_CREATE</base>
+        <trans>Create a pseudonym</trans>
+    </entry>
+    <entry>
+        <base>DESC_PSEUDONYM_NAME</base>
+       <trans>Please select an existing account or group for the pseudonym from the pulldown menu below</trans>
+    </entry>
+    <entry>
+        <base>MODIFY_PSEUDONYM</base>
+        <trans>Modify Pseudonym</trans>
+    </entry>     
+       <entry>
+        <base>PSEUDONYM_NAME</base>
+        <trans>Pseudonym name</trans>
+    </entry>
+    <entry>
+        <base>VALID_PSEUDONYM_NAMES</base>
+        <trans><![CDATA[ The pseudonym should contain only lower-case letters, numbers, period, hyphen and underscore and should start with a lower-case letter or number. For example "sales", "john.holland", "123" and "email-administrator" are all valid pseudonyms, but "John Smith" and "Henry Miller" are not. <p>You can also create email aliases for accounts and (virtual) domains that are valid on this server. For example "fred@virtualdomain.com" can be forwarded to "mary" (or to another valid user account).</p> ]]></trans>
+    </entry>
+    <entry>
+        <base>NAME_IN_USE</base>
+        <trans>Error: That name is in use You cannot create a pseudonym with that name.</trans>
+    </entry>
+    <entry>
+        <base>NOT_A_PSEUDONYM</base>
+        <trans>That account is not a pseudonym</trans>
+    </entry>
+
+    <entry>
+        <base>PSEUDONYM_INVALID_DOMAIN</base>
+        <trans>That domain is not hosted on this server</trans>
+    </entry>
+
+    <entry>
+        <base>PSEUDONYM_INVALID_NOACCT</base>
+        <trans>That account is not hosted on this server</trans>
+    </entry>
+
+    <entry>
+        <base>PSEUDONYM_INVALID_SAMEACCT</base>
+        <trans>A pseudonym cannot point to the same account</trans>
+    </entry>
+    <entry>
+        <base>CREATE_SUCCEEDED</base>
+        <trans>Successfully created pseudonym</trans>
+    </entry>
+    <entry>
+        <base>MODIFY_SUCCEEDED</base>
+        <trans>Successfully modified pseudonym</trans>
+    </entry>
+    <entry>
+        <base>REMOVE_SUCCEEDED</base>
+        <trans>Successfully removed pseudonym</trans>
+    </entry>
+    <entry>
+      <base>EVERYONE</base>
+      <trans>Everyone</trans>
+    </entry>
+      <entry>
+        <base>Pseudonyms</base>
+        <trans>Pseudonyms</trans>
+      </entry>
+
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/qmailanalog     1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/qmailanalog      2008-10-13 00:24:28.000000000 -0600
@@ -0,0 +1,87 @@
+<lexicon lang="ja">
+    <entry>
+       <base>FORM_TITLE</base>
+       <trans>Mail Log File Analysis</trans>
+    </entry>
+    <entry>
+       <base>INITIAL_DESC</base>
+       <trans><![CDATA[ <P>Analysing the mail system log files can aid both in understanding how your system is performing and in diagnosing delivery problems. Several different reports are available.</P> <P>Please note that it may take several minutes to generate these reports</P> ]]></trans>
+    </entry>
+    <entry>
+       <base>REPORT_TYPE</base>
+       <trans>Choose a report type</trans>
+    </entry>
+    <entry>
+       <base>GENERATE_REPORT</base>
+       <trans>Generate report</trans>
+    </entry>
+    <entry>
+       <base>LIST_OUTGOING</base>
+       <trans>List outgoing messages and recipients</trans>
+    </entry>
+    <entry>
+       <base>SUMMARIZE_QUEUE</base>
+       <trans>Summarize status of mail queue</trans>
+    </entry>
+    <entry>
+       <base>SUCCESSFUL_DELIVERY_DELAY</base>
+       <trans>Successful delivery delay distribution</trans>
+    </entry>
+    <entry>
+       <base>REASONS_DEFERRAL</base>
+       <trans>Reasons for deferral</trans>
+    </entry>
+    <entry>
+       <base>REASONS_FAILURE</base>
+       <trans>Reasons for failure</trans>
+    </entry>
+    <entry>
+       <base>BASIC_STATS</base>
+       <trans>Basic statistics</trans>
+    </entry>
+    <entry>
+       <base>RECIP_STATS</base>
+       <trans>Recipients statistics</trans>
+    </entry>
+    <entry>
+       <base>RECIP_HOSTS</base>
+       <trans>Recipient hosts</trans>
+    </entry>
+    <entry>
+       <base>RECIP_ORDERED</base>
+       <trans>Recipients in best order for mailing lists</trans>
+    </entry>
+    <entry>
+       <base>SENDER_STATS</base>
+       <trans>Sender statistics</trans>
+    </entry>
+    <entry>
+       <base>SENDMAIL_STYLE</base>
+       <trans>Sendmail style log</trans>
+    </entry>
+    <entry>
+       <base>REASONS_SUCCESS</base>
+       <trans>Reasons for success</trans>
+    </entry>
+    <entry>
+       <base>SENDER_UIDS</base>
+       <trans>Sender uids</trans>
+    </entry>
+    <entry>
+       <base>INVALID_REPORT_TYPE</base>
+       <trans>Invalid report type:</trans>
+    </entry>
+    <entry>
+       <base>REPORT_GENERATED</base>
+       <trans>Report generated:</trans>
+    </entry>
+    <entry>
+       <base>END_OF_REPORT</base>
+       <trans>End of Report</trans>
+    </entry>
+    <entry>
+       <base>Mail log file analysis</base>
+       <trans>Mail log file analysis</trans>
+    </entry>
+
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/quota   1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/quota    2008-10-13 00:24:33.000000000 -0600
@@ -0,0 +1,106 @@
+<lexicon lang="ja">
+    <entry>
+      <base>FORM_TITLE</base>
+      <trans>Create, modify, or remove user account quotas</trans>
+    </entry>
+    <entry>
+      <base>UNABLE_TO_OPEN_ACCOUNTS</base>
+      <trans>Unable to open accounts db</trans>
+    </entry>
+    <entry>
+      <base>QUOTA_DESC</base>
+      <trans><![CDATA[ <p>You can set filesystem quotas for users on your system by clicking the "Modify" button next to the user you wish to update. <p>If the user exceeds the "Limit with grace period", warnings will be generated. If this limit is exceeded for longer than a week or if the "Absolute limit" is reached, the user will be unable to store any more files or receive any more e-mail. <p>A setting of '0' for either limit disables that limit for the corresponding user. <p>The disk space for each user includes the user's home directory, e-mail, and any files owned by the user in information bays. ]]></trans>
+    </entry>
+    <entry>
+      <base>CURRENT_USAGE_AND_SETTINGS</base>
+      <trans>Current Quota Usage and Settings</trans>
+    </entry>
+    <entry>
+      <base>LIMIT_WITH_GRACE</base>
+      <trans>Limit with grace period</trans>
+    </entry>
+    <entry>
+      <base>LIMIT_WITH_GRACE_MB</base>
+      <trans>Limit with grace period (MB)</trans>
+    </entry>
+    <entry>
+      <base>ABS_LIMIT</base>
+      <trans>Absolute limit</trans>
+    </entry>
+    <entry>
+      <base>ABS_LIMIT_MB</base>
+      <trans>Absolute limit (MB)</trans>
+    </entry>
+    <entry>
+      <base>CURRENT_USAGE</base>
+      <trans>Current usage (MB)</trans>
+    </entry>
+    <entry>
+      <base>COULD_NOT_GET_UID</base>
+      <trans>Could not determine the uid for user:</trans>
+    </entry>
+    <entry>
+      <base>ERR_NO_SUCH_ACCT</base>
+      <trans>Error: there is no account named:</trans>
+    </entry>
+    <entry>
+      <base>ERR_NOT_A_USER_ACCT</base>
+      <trans>Error: the account is not a user account:</trans>
+    </entry>
+    <entry>
+      <base>ACCOUNT_IS_TYPE</base>
+      <trans>It is an account of type:</trans>
+    </entry>
+    <entry>
+      <base>MODIFY_USER_TITLE</base>
+      <trans>Modify user quota limits</trans>
+    </entry>
+    <entry>
+      <base>USER</base>
+      <trans>User:</trans>
+    </entry>
+    <entry>
+      <base>CURRENTLY_HAS</base>
+      <trans>currently has:</trans>
+    </entry>
+    <entry>
+      <base>FILES</base>
+      <trans>files</trans>
+    </entry>
+    <entry>
+      <base>OCCUPYING</base>
+      <trans>occupying:</trans>
+    </entry>
+    <entry>
+      <base>MEGABYTES</base>
+      <trans>megabytes</trans>
+    </entry>
+    <entry>
+      <base>INSTRUCTIONS</base>
+      <trans>Enter the quota as an integer with optional unit suffix of 'K' for kilobytes, 'M' for megabytes, or 'G' for gigabytes. Entries with no suffix are assumed to be in megabytes. A setting of '0' for either limit disables that limit for the corresponding user.</trans>
+    </entry>
+    <entry>
+      <base>SOFT_VAL_MUST_BE_INTEGER</base>
+      <trans>Error: limit with grace period must be an integer, optionally followed by one of the unit suffixes K, M, or G.</trans>
+    </entry>
+    <entry>
+      <base>HARD_VAL_MUST_BE_INTEGER</base>
+      <trans>Error: absolute limit must be an integer, optionally followed by one of the unit suffixes K, M, or G.</trans>
+    </entry>
+    <entry>
+      <base>ERR_HARD_LT_SOFT</base>
+      <trans>Error: absolute limit must be greater than limit with grace time.</trans>
+    </entry>
+    <entry>
+      <base>ERR_MODIFYING</base>
+      <trans>Error occurred while modifying user.</trans>
+    </entry>
+    <entry>
+      <base>SUCCESSFULLY_MODIFIED</base>
+      <trans>Successfully modified quota for user account:</trans>
+    </entry>
+    <entry>
+       <base>Quotas</base>
+       <trans>Quotas</trans>
+    </entry>
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/reboot  1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/reboot   2008-10-13 00:24:39.000000000 -0600
@@ -0,0 +1,42 @@
+<lexicon lang="ja">
+    <entry>
+       <base>FORM_TITLE</base>
+       <trans>Shutdown or reboot</trans>
+    </entry>
+    <entry>
+       <base>REBOOT</base>
+       <trans>Reboot</trans>
+    </entry>
+    <entry>
+       <base>REBOOT_SUCCEEDED</base>
+       <trans>Reboot request initiated successfully.</trans>
+    </entry>
+    <entry>
+       <base>DESC_REBOOT</base>
+       <trans>Your server has initiated the reboot process.</trans>
+    </entry>
+    <entry>
+       <base>RECONFIGURE_SUCCEEDED</base>
+       <trans>Reconfiguration request initiated successfully.</trans>
+    </entry>
+    <entry>
+       <base>DESC_RECONFIGURE</base>
+       <trans>Your server has initiated a full system reconfiguration and reboot.</trans>
+    </entry>
+    <entry>
+       <base>DESC_SHUTDOWN</base>
+       <trans>Your server has initiated the shutdown process. The process will take several minutes to complete, after which you can switch off the power.</trans>
+    </entry>
+    <entry>
+       <base>LABEL_REBOOT</base>
+       <trans>Select Shutdown, Reboot or Reconfigure</trans>
+    </entry>
+    <entry>
+       <base>DESCRIPTION</base>
+       <trans><![CDATA[ You can reboot, shut down your server or perform a full system reconfiguration from this screen. You must perform a shutdown before switching the power off. All of these functions take several minutes to complete. When you click <b>perform</b> the operation will be initiated immediately, so be ready! ]]></trans>
+    </entry>
+    <entry>
+       <base>Reboot or shutdown</base>
+       <trans>Reboot or shutdown</trans>
+    </entry>
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/remoteaccess    1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/remoteaccess     2008-10-13 00:24:45.000000000 -0600
@@ -0,0 +1,159 @@
+<lexicon lang="ja">
+    <entry>
+       <base>FORM_TITLE</base>
+       <trans>Change remote access settings</trans>
+    </entry>   
+    <entry>
+       <base>DESCRIPTION</base>
+       <trans>For each of the options below, the private setting allows anyone from your local network to access your server. The public setting allows access from anywhere on the Internet. The no access setting disables access. To understand the security implications of changing these options from the default settings, you should read the user's guide section on remote access.</trans>   
+    </entry>
+    <entry>
+       <base>SUCCESS</base>
+       <trans>The new remote access settings have been saved.</trans>
+    </entry>
+    <entry>
+       <base>NO_ACCESS</base>
+       <trans>No Access</trans>
+    </entry>
+    <entry>
+       <base>PASSWORD_LOGIN_PRIVATE</base>
+       <trans>Accept passwords only from local networks</trans>
+    </entry>
+    <entry>
+       <base>PASSWORD_LOGIN_PUBLIC</base>
+       <trans>Accept passwords from anywhere</trans>
+    </entry>
+    <entry>
+       <base>LABEL_TELNET_ACCESS</base>
+       <trans>Telnet access</trans>
+    </entry>
+    <entry>
+       <base>LABEL_FTP_ACCESS</base>
+       <trans>FTP access</trans>
+    </entry>
+    <entry>
+       <base>LABEL_FTP_LOGIN</base>
+       <trans>FTP password access</trans>
+    </entry>
+    <entry>
+       <base>LABEL_PPTP</base>
+       <trans>Number of PPTP clients</trans>
+    </entry>
+    <entry>
+        <base>LABEL_SSH_PORT</base>
+        <trans>TCP Port for secure shell access</trans>
+    </entry>
+    <entry>
+       <base>LABEL_SSH</base>
+       <trans>Secure shell access</trans>
+    </entry>
+    <entry>
+       <base>LABEL_SSH_ADMIN</base>
+       <trans>Allow administrative command line access over secure shell</trans>
+    </entry>
+    <entry>
+       <base>LABEL_SSH_PASSWORD_ACCESS</base>
+       <trans>Allow secure shell access using standard passwords</trans>
+    </entry>
+    <entry>
+       <base>DESC_SSH</base>
+       <trans><![CDATA[ <hr class="sectionbar" /> <h2>Secure Shell Settings</h2>You can control Secure Shell access to your server. The public setting should only be enabled by experienced administrators for remote problem diagnosis and resolution. We recommend leaving this parameter set to "No Access" unless you have a specific reason to do otherwise. ]]></trans>
+    </entry>
+    <entry>
+       <base>DESC_FTP_ACCESS</base>
+       <trans><![CDATA[ <hr class="sectionbar" /><h2>FTP Settings</h2> You can also control <b>FTP</b> access to your server. We recommend leaving this parameter set to 'no access' unless you have a specific reason to do otherwise. <p> Note: these settings limit access to the server and override other settings, including those for individual information bays.</p> ]]></trans>
+    </entry>
+    <entry>
+       <base>DESC_FTP_LOGIN</base>
+       <trans><![CDATA[ You can also control authenticated FTP access to information bays and user accounts. We strongly recommend leaving this parameter set to private unless you have a specific reason to do otherwise. <p> Note: a secure shell sftp client can also be used to access the server, if remote access via the secure shell is enabled. This method of access protects the passwords and data of the FTP session, whereas standard FTP provides no protection.</p> ]]></trans>
+    </entry>
+    <entry>
+       <base>DESC_PPTP</base>
+       <trans><![CDATA[ <hr class="sectionbar" /><h2>PPTP Settings</h2> You can allow PPTP access to your server. You should leave this feature disabled by setting the value to the number 0 unless you require PPTP access. ]]></trans>
+    </entry>
+    <entry>
+       <base>VALUE_ZERO_OR_POSITIVE</base>
+       <trans>Value must be zero or a positive integer</trans>
+    </entry>
+    <entry>
+       <base>REMOTE_MANAGEMENT</base>
+       <trans>Remote Management</trans>
+    </entry>
+    <entry>
+       <base>VALIDFROM_DESC</base>
+       <trans><![CDATA[ <hr class="sectionbar" /><h2>{$REMOTE_MANAGEMENT}</h2> <p>It is possible to allow hosts on remote networks to access the server manager by entering those networks here. Use a subnet mask of 255.255.255.255 to limit the access to the specified host. Any hosts within the specified range will be able to access the server manager using HTTPS.</p> ]]></trans>
+    </entry>
+    <entry>
+       <base>DESC_VALID_FROM_ENTRIES</base>
+       <trans>To add a new remote management network, enter the details below.</trans>
+    </entry>
+    <entry>
+       <base>SUBNET_MASK</base>
+       <trans>Subnet mask</trans>
+    </entry>
+    <entry>
+       <base>NUM_OF_HOSTS</base>
+       <trans>Number of hosts</trans>
+    </entry>
+    <entry>
+       <base>NO_ENTRIES_YET</base>
+       <trans>There are no entries yet</trans>
+    </entry>
+    <entry>
+       <base>INVALID_SUBNET_MASK</base>
+       <trans>Invalid subnet mask</trans>
+    </entry>
+    <entry>
+       <base>ERR_INVALID_PARAMS</base>
+       <trans>Either provide both a network and subnet mask, or leave both fields blank.</trans>
+    </entry>
+    <entry>
+       <base>ERR_NO_RECORD</base>
+       <trans>Unable to locate httpd-admin record in configuration db</trans>
+    </entry>
+    <entry>
+       <base>Remote access</base>
+       <trans>Remote access</trans>
+    </entry>
+    <entry>
+        <base>LABEL_SERIAL_CONSOLE_ACCESS</base>
+        <trans>Serial console</trans>
+    </entry>
+    <entry>
+        <base>DESC_SERIAL_CONSOLE_ACCESS</base>
+        <trans><![CDATA[ <hr class="sectionbar" /><h2>Serial console</h2> You can allow access to the server console from a terminal connected to a server serial port.]]></trans>
+    </entry>
+    <entry>
+        <base>PORT1_ENABLED</base>
+        <trans>Enabled on serial port 1</trans>
+    </entry>
+    <entry>
+        <base>PORT2_ENABLED</base>
+        <trans>Enabled on serial port 2</trans>
+    </entry>   
+
+    <entry>
+        <base>LABEL_PPTP_ACCESS</base>
+        <trans>PPTP default user access</trans>
+    </entry>
+    <entry>
+        <base>DESC_TELNET_ACCESS</base>
+        <trans><![CDATA[ <hr class="sectionbar" /><h2>Telnet Settings</h2> WARNING: Telnet is currently enabled, but this feature is no longer supported. Telnet is inherently insecure and should only be used in circumstances where no practical alternative exists. You should change option to {$NO_ACCESS} and use secure shell if remote access is required. Once disabled, telnet will no longer appear on this screen. ]]></trans>
+    </entry>
+    <entry>
+       <base>DESC_IPSECRW</base>
+       <trans><![CDATA[ <h2>IPSEC Client (Roadwarrior) Settings</h2> You can allow IPSEC client access to your server, authenticated by digital certificates. You should leave this feature disabled by setting the value to the number 0 unless you require IPSEC client access. ]]></trans>
+    </entry>
+    <entry>
+       <base>LABEL_IPSECRW_SESS</base>
+       <trans>Number of IPSEC clients</trans>
+    </entry>
+    <entry>
+       <base>DESC_IPSECRW_RESET</base>
+       <trans><![CDATA[If you wish to reset all digital certificates, you can do so here.<br>Any old certificates will no longer authenticate against the server, so <b><i>all IPSEC clients will need to import a new certificate!</i></b>. ]]></trans>
+    </entry>
+    <entry>
+       <base>LABEL_IPSECRW_RESET</base>
+       <trans>Reset digital certificates</trans>
+    </entry>
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/review  1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/review   2008-10-13 00:24:51.000000000 -0600
@@ -0,0 +1,126 @@
+<lexicon lang="ja">
+    <entry>
+        <base>Review configuration</base>
+        <trans>Review configuration</trans>
+    </entry>   
+    <entry>
+        <base>DESCRIPTION</base>
+        <trans>This report summarizes the networking, server, and domain parameters on this server relevant to configuring the client computers on your network. You may wish to print this page and use it as a reference.</trans>    
+    </entry>
+    <entry>
+        <base>NETWORKING_PARAMS</base>
+        <trans>Networking Parameters</trans>
+    </entry> 
+    <entry>
+        <base>SERVER_MODE</base>
+        <trans>Server Mode</trans>
+    </entry>
+    <entry>
+        <base>LOCAL_IP_ADDRESS_SUBNET_MASK</base>
+        <trans>Local IP address / subnet mask</trans>
+    </entry>
+    <entry>
+        <base>EXTERNAL_IP_ADDRESS_SUBNET_MASK</base>
+        <trans>External IP address / subnet mask</trans>
+    </entry>
+    <entry>
+        <base>GATEWAY</base>
+        <trans>Gateway</trans>
+    </entry>
+    <entry>
+        <base>ADDITIONAL_LOCAL_NETWORKS</base>
+        <trans>Additional local networks</trans>
+    </entry>
+    <entry>
+        <base>DHCP_SERVER</base>
+        <trans>DHCP server</trans>
+    </entry>
+    <entry>
+        <base>BEGINNING_OF_DHCP_ADDRESS_RANGE</base>
+        <trans>Beginning of DHCP address range</trans>
+    </entry>
+    <entry>
+        <base>END_OF_DHCP_ADDRESS_RANGE</base>
+        <trans>End of DHCP address range</trans>
+    </entry>
+    <entry>
+        <base>SERVER_NAMES</base>
+        <trans>Server names</trans>
+    </entry>
+    <entry>
+        <base>DNS_SERVER</base>
+        <trans>DNS server</trans>
+    </entry>
+    <entry>
+        <base>WEB_SERVER</base>
+        <trans>Web server</trans>
+    </entry>
+    <entry>
+        <base>PROXY_SERVER</base>
+        <trans>Proxy server</trans>
+    </entry>
+    <entry>
+        <base>FTP_SERVER</base>
+        <trans>FTP server</trans>
+    </entry>
+    <entry>
+        <base>SMTP_POP_AND_IMAP_MAIL_SERVERS</base>
+        <trans>SMTP, POP, and IMAP mail servers</trans>
+    </entry>
+    <entry>
+        <base>HOSTS</base>
+        <trans>Hosts</trans>
+    </entry> 
+    <entry>
+        <base>DOMAIN_INFORMATION</base>
+        <trans>Domain information</trans>
+    </entry>
+    <entry>
+        <base>PRIMARY_DOMAIN</base>
+        <trans>Primary domain</trans>
+    </entry>
+    <entry>
+        <base>VIRTUAL_DOMAINS</base>
+        <trans>Virtual domains</trans>
+    </entry>
+    <entry>
+        <base>PRIMARY_WEB_SITE</base>
+        <trans>Primary web site</trans>
+    </entry>
+    <entry>
+        <base>MITEL_NETWORKS_SME_SERVER_MANAGER</base>
+        <trans>Server manager</trans>
+    </entry>
+    <entry>
+        <base>MITEL_NETWORKS_SME_SERVER_USER_PASSWORD_PANEL</base>
+        <trans>User password panel</trans>
+    </entry>
+    <entry>
+        <base>EMAIL_ADDRESSES</base>
+        <trans>Email Addresses</trans>
+    </entry>
+    <entry>
+        <base>EMAIL_USERACCOUNT</base>
+        <trans>useraccount</trans>
+    </entry>
+    <entry>
+        <base>EMAIL_FIRSTNAME</base>
+        <trans>firstname</trans>
+    </entry>
+    <entry>
+        <base>EMAIL_LASTNAME</base>
+        <trans>lastname</trans>
+    </entry>
+    <entry>
+        <base>NO_VIRTUAL_DOMAINS</base>
+        <trans>No virtual domains defined</trans>
+    </entry>
+    <entry>
+        <base>NO_NETWORKS</base>
+        <trans>No additional networks defined</trans>
+    </entry>
+    <entry>
+        <base>INTERNET_VISIBLE_ADDRESS</base>
+        <trans>Internet Visible IP Address</trans>
+    </entry>
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/starterwebsite  1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/starterwebsite   2008-10-13 00:24:57.000000000 -0600
@@ -0,0 +1,43 @@
+<lexicon lang="ja">
+      <entry>
+       <base>FORM_TITLE</base>
+       <trans>Create a starter website</trans>
+      </entry>
+      <entry>
+       <base>SUCCESS</base>
+       <trans>Successfully created starter web site (wrote file index.htm). You can visit your new website at the address below:</trans>
+      </entry>
+      <entry>
+       <base>DESCRIPTION</base>
+         <trans><![CDATA[ <p> To create a simple web page for your company, fill in the fields below and click on <b>Create</b>. </p> <p> You can leave any field blank if you do not need it. </p> <p> The text that you enter below will be line wrapped for a nicer appearance in your web page. Leave a blank line whenever you want to start a new paragraph. If you need to force a line break without starting a new paragraph (for example after each line of a mailing address), then type the four-character sequence <blockquote>&lt;BR&gt;</blockquote> where you would like each line break. </p> <p> <em>Do not use this option</em> if you have already customized your web site, since it will overwrite the "index.htm" file in your web site directory. </p> ]]></trans>
+      </entry>
+      <entry>
+       <base>LABEL_COMPANYNAME</base>
+       <trans>Company name</trans>
+      </entry>
+       
+      <entry> 
+       <base>DESC_HEADER1</base>
+       <trans>First header, typically used for short phrases such as "Leader in the field of textile manufacturing"</trans>
+      </entry>
+      <entry> 
+       <base>DESC_TEXT1</base>
+       <trans>Text following first header, typically used for a paragraph of marketing information.</trans>
+      </entry>
+      <entry> 
+         <base>DESC_HEADER2</base>
+       <trans>Second header, typically used for short phrases such as "For more information" or "To order our products":</trans>
+       </entry>
+      <entry> 
+       <base>DESC_TEXT2</base>
+       <trans>Text following second header, typically used for contact or ordering information:</trans>
+       </entry>
+      <entry>
+       <base>DESC_SUBMIT</base>
+       <trans><![CDATA[ <p>When you create this web page, the file "index.htm" will be overwritten in your web site directory.</p> <p>Do you wish to proceed?</p> ]]></trans>
+      </entry>
+      <entry>
+       <base>Create starter web site</base>
+       <trans>Create starter web site</trans>
+      </entry>
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/support 1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/support  2008-10-13 00:25:01.000000000 -0600
@@ -0,0 +1,10 @@
+<lexicon lang="ja">
+    <entry>
+      <base>FORM_TITLE</base>
+      <trans>Support, warranty and licensing information</trans>
+    </entry>
+    <entry>
+        <base>Support and licensing</base>
+        <trans>Support and licensing</trans>
+    </entry>
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/useraccounts    1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/useraccounts     2008-10-13 00:25:08.000000000 -0600
@@ -0,0 +1,254 @@
+<lexicon lang="ja">
+    <entry>
+        <base>FORM_TITLE</base>
+        <trans>Create, modify, or remove user accounts</trans>
+    </entry>
+    <entry>
+        <base>FIRSTPAGE_DESC</base>
+        <trans><![CDATA[ <p> <a class="button-like" href="useraccounts?page=1&page_stack=&Next=Next">Add user account</a> </p> <p> You can modify, lock or remove any account or reset the account's password by clicking on the corresponding command next to the account. </p> <p> If the account is marked as locked, that means that the user's password needs to be reset. Please note that newly created accounts are automatically locked until the password is changed. </p> ]]></trans>
+    </entry>
+    <entry>
+        <base>P2_TITLE</base>
+        <trans>Create or modify</trans>
+    </entry>
+    <entry>
+        <base>CREATE_MODIFY_DESC</base>
+        <trans><![CDATA[ <p> The account name should contain only lower-case letters, numbers, hyphens, periods, underscores and should start with a lower-case letter. For example "betty", "hjohnson", and "mary-jane" are all valid account names, but "3friends", "John Smith", and "henry:miller" are not. </p> <p> Note that two special pseudonyms will be created for each new account. These pseudonyms provide the ability to have alternative mail accounts for that user which include their first name and last name separated with a period (.) and underscore (_). So, for the account "betty" with first name "Betty" and last name "Rubble" two pseudonyms are created as betty.rubble and betty_rubble. </p> <p> The directory information (department, company, etc.) can be changed from the defaults shown below. The changes will apply only to this user. </p> ]]></trans>
+    </entry>
+    <entry>
+        <base>MODIFY_ADMIN_TITLE</base>
+        <trans>Modify the admin account</trans>
+    </entry>
+    <entry>
+        <base>MAX_USERS_EXCEEDED</base>
+        <trans>ERROR: Unable to add user account. You have reached the maximum number of users for which you have licenses. You need to either delete an existing user account or contact your authorized reseller to purchase additional user licenses.</trans>
+    </entry>
+    <entry>
+        <base>USER_CREATED</base>
+        <trans>Successfully created user account.</trans>
+    </entry>
+    <entry>
+        <base>USER_MODIFIED</base>
+        <trans>Successfully modified user account.</trans>
+    </entry>
+    <entry>
+        <base>CANNOT_MODIFY_USER</base>
+        <trans>Error: an internal error occurred while attempting to modify the user "{$acctName}".</trans> 
+    </entry>
+    <entry>
+        <base>CANNOT_MODIFY_USER_GROUPS</base> 
+        <trans>Error: an internal error occurred while attempting to modify the group "{$group}" for user "{$acctName}".</trans>
+    </entry>
+    <entry>
+        <base>TAINTED_USER</base>
+        <trans>The account name "{$acctName}" contains invalid characters.</trans>
+    </entry>
+    <entry>
+        <base>ACCOUNT_NAME</base>
+        <trans>Account name</trans>
+    </entry>
+    <entry>
+        <base>FIRSTNAME</base>
+        <trans>First name</trans>
+    </entry>
+    <entry>
+        <base>LASTNAME</base>
+        <trans>Last name</trans>
+    </entry>
+    <entry>
+        <base>DEPARTMENT</base>
+        <trans>Department</trans>
+    </entry>
+    <entry>
+        <base>COMPANY</base>
+        <trans>Company</trans>
+    </entry>
+    <entry>
+        <base>STREET_ADDRESS</base>
+        <trans>Street address</trans>
+    </entry>
+    <entry>
+        <base>CITY</base>
+        <trans>City</trans>
+    </entry>
+    <entry>
+        <base>PHONE_NUMBER</base>
+        <trans>Phone number</trans>
+    </entry>
+    <entry>
+        <base>EMAIL_DELIVERY</base>
+        <trans>Email delivery</trans>
+    </entry>
+    <entry>
+        <base>DELIVER_EMAIL_LOCALLY</base>
+        <trans>Deliver email locally</trans>
+    </entry>
+    <entry>
+        <base>FORWARD_EMAIL</base>
+        <trans>Forward email to address below</trans>
+    </entry>
+    <entry>
+        <base>DELIVER_AND_FORWARD</base>
+        <trans>Both deliver locally and forward</trans>
+    </entry>
+    <entry>
+        <base>FORWARDING_ADDRESS</base>
+        <trans>Forwarding address</trans>
+    </entry>
+    <entry>
+        <base>GROUP_MEMBERSHIPS</base>
+        <trans>Group memberships</trans>
+    </entry>
+    <entry>
+        <base>RESET_DESC</base>
+        <trans>You are about to change the password for the user account</trans>
+    </entry>
+    <entry>
+        <base>RESET_DESC2</base>
+        <trans>Enter the new password in the fields below</trans>
+    </entry>
+    <entry>
+        <base>ERR_OCCURRED_MODIFYING_PASSWORD</base>
+        <trans>An error occurred while updating the password</trans>
+    </entry>
+    <entry>
+        <base>PASSWORD_CHANGE_SUCCEEDED</base>
+        <trans>Successfully changed password for user "{$acctName}".</trans>
+    </entry>
+    <entry>
+        <base>LOCK_DESC</base>
+        <trans>You are about to lock the user account</trans>
+    </entry>
+    <entry>
+        <base>LOCKED_ACCOUNT</base>
+        <trans>Successfully locked account for user "{$acctName}".</trans>
+    </entry>
+    <entry>
+        <base>NO_SUCH_USER</base>
+        <trans>Error: the user account "{$acctName}" does not exist.</trans>
+    </entry>
+    <entry>
+        <base>PSEUDONYM_CLASH</base>
+        <trans>Error: the pseudonym "{$pseudonym}" is already taken by the existing user account "{$clashName}". To differentiate, add initials to this field.</trans>
+    </entry>
+    <entry>
+        <base>LOCK_ACCOUNT</base>
+        <trans>Lock account</trans>
+    </entry>
+    <entry>
+        <base>LOCK_ACCOUNT_TITLE</base>
+        <trans>Lock user account</trans>
+    </entry>
+    <entry>
+        <base>LOCK_DESC2</base>
+        <trans><![CDATA[ This user account will be locked. This means that this user will not be able to log in, and will not be able to collect e-mail. Any e-mail arriving will still be stored and/or forwarded to an external e-mail address, as configured. The account may be activated in the future by setting a new password. The current password will not be retained. </p> <p> <b>Are you sure you wish to lock this account?</b> ]]></trans>
+    </entry>
+    <entry>
+        <base>REMOVE_ACCOUNT_TITLE</base>
+        <trans>Remove user account</trans>
+    </entry>
+    <entry>
+        <base>REMOVE_DESC</base>
+        <trans>You are about to remove the user account</trans>
+    </entry>
+    <entry>
+        <base>REMOVE_DESC2</base>
+        <trans><![CDATA[ All files belonging to this user account will be deleted. Also, any e-mail for this user account still remaining on the server (i.e. that has not yet been retrieved by the user) will be discarded. </p> <p> <b>Are you sure you wish to remove this account?</b> ]]></trans>
+    </entry>
+    <entry>
+        <base>LOCK</base>
+        <trans>Lock</trans>
+    </entry>
+    <entry>
+        <base>NO_USER_ACCOUNTS</base>
+        <trans>There are no user accounts on this system.</trans>
+    </entry>
+    <entry>
+        <base>Users</base>
+        <trans>ユーザ</trans>
+    </entry>
+    <entry>
+        <base>ACCT_NAME_HAS_INVALID_CHARS</base>
+        <trans>The account name "{$acctName}" contains invalid characters. Account names must start with a lower case letter and contain only lower case letters, numbers, hyphens, periods and underscores.</trans>
+    </entry>
+    <entry>
+        <base>ACCOUNT_TOO_LONG</base>
+        <trans>Error: account name is too long. The maximum is {$maxLength} characters.</trans>
+    </entry>
+    <entry>
+        <base>ACCOUNT_CONFLICT</base>
+        <trans>Error: the account "{$account}" can't be created because there is already a {$type} account of that name.</trans>
+    </entry>    
+    <entry>
+        <base>ERR_OCCURRED_CREATING</base>
+        <trans>An error occurred creating the user.</trans>
+    </entry>
+    <entry>
+        <base>CANNOT_CONTAIN_WHITESPACE</base>
+        <trans>This field cannot contain white-space</trans>
+    </entry>
+    <entry>
+        <base>UNACCEPTABLE_CHARS</base>
+        <trans>This field must contain only letters, numbers, dots, hypens and underscores and start with a letter</trans>
+    </entry>
+    <entry>
+        <base>MEMBER</base>
+        <trans>Member?</trans>
+    </entry>
+    <entry>
+        <base>VPN_CLIENT_ACCESS</base>
+        <trans>VPN Client Access</trans>
+    </entry>
+    <entry>
+        <base>SYSTEM_PASSWORD_FORM_TITLE</base>
+        <trans>Change system password</trans>
+    </entry>    
+    <entry> 
+        <base>SYSTEM_PASSWORD_DESCRIPTION</base>
+        <trans><![CDATA[ Certain services on this server installation require a username and password (for example this web page for the server manager application). The username is always admin. You can change the system password using the fields below. ]]></trans>        
+    </entry>
+    <entry>
+        <base>SYSTEM_PASSWORD_UNPRINTABLES_IN_PASS</base>
+        <trans>Password must contain only printable characters</trans>
+    </entry>
+    <entry>
+        <base>SYSTEM_PASSWORD_VERIFY_ERROR</base>
+        <trans>The two passwords are not identical.</trans>
+    </entry>
+    <entry>
+        <base>SYSTEM_PASSWORD_AUTH_ERROR</base>
+        <trans>The current password is incorrect.</trans>
+    </entry>
+    <entry>
+        <base>SYSTEM_PASSWORD_CHANGED</base>
+        <trans>The system password has been changed.</trans>
+    </entry>
+    <entry>
+        <base>CURRENT_SYSTEM_PASSWORD</base>
+        <trans>Current system password</trans>
+    </entry>
+    <entry>
+        <base>NEW_SYSTEM_PASSWORD</base>
+        <trans>New system password</trans>
+    </entry>
+    <entry>
+        <base>NEW_SYSTEM_PASSWORD_VERIFY</base>
+        <trans>New system password (verify)</trans>
+    </entry>            
+    <entry>
+        <base>LABEL_IPSECRW_DOWNLOAD</base>
+        <trans>Download digital certificate to IPSec client</trans>
+    </entry>
+    <entry>
+        <base>ERR_OCCURRED_DELETING</base>
+        <trans>An error occurred while trying to delete the user.</trans>
+    </entry>
+    <entry>
+        <base>FREEBUSY_URL</base>
+        <trans>Calendar Free/Busy URL</trans>
+    </entry>
+    <entry>
+        <base>FREEBUSY_DESCRIPTION</base>
+        <trans><![CDATA[ The Calendar Free/Busy URL needs to be in the following format:<br> https://www.<b>domain.com</b>/horde/kronolith/fb.php?u=<b>user%40domain.com.&nbsp;&nbsp;Note:</b> %40 translates to the @ character.<br> </p> ]]></trans>
+    </entry>
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/viewlogfiles    1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/viewlogfiles     2008-10-13 00:25:19.000000000 -0600
@@ -0,0 +1,83 @@
+<lexicon lang="ja">
+    <entry>
+        <base>View log files</base>
+        <trans>View log files</trans>
+    </entry>
+
+    <entry>
+        <base>FIRSTPAGE_DESC</base>
+        <trans><![CDATA[ This panel allows you to view or download the log files generated by the services running on your server. ]]></trans>
+    </entry>
+    <entry>
+        <base>LOG_FILE_SELECT_DESC</base>
+        <trans>Choose a log file to view</trans>
+    </entry>
+    <entry>
+        <base>FILTER_PATTERN_DESC</base>
+        <trans><![CDATA[ <p>You may optionally specify a filter pattern to display only the lines from the log file which match this pattern. If you leave this field blank, all available lines of the log file will be displayed. Note that this option is not used if you download the logfile.</p> ]]></trans>
+    </entry>
+    <entry>
+        <base>FILTER_PATTERN_LABEL</base>
+        <trans>Filter Pattern (optional)</trans>
+    </entry>
+    <entry>
+        <base>MATCH_PATTERN_DESC</base>
+        <trans><![CDATA[ <p>You may also optionally specify a highlight pattern to mark in bold any lines from the log file which match the highlight pattern. The highlight pattern is applied to any lines which have already matched the filter pattern. Note that this option is not used if you download the logfile.</p> ]]></trans>
+    </entry>
+    <entry>
+        <base>MATCH_PATTERN_LABEL</base>
+        <trans>Highlight Pattern (optional)</trans>
+    </entry>
+    <entry>
+        <base>END_DESC</base>
+        <trans>Please note that it may take quite some time to generate these reports.</trans>
+    </entry>
+    <entry>
+        <base>VIEW</base>
+        <trans>View log file</trans>
+    </entry>
+    <entry>
+        <base>LOG_FILE_EMPTY</base>
+        <trans>Log file "{$filename}" is empty!</trans>
+    </entry>
+    <entry>
+        <base>VIEWING_TIME</base>
+        <trans>Viewed at {$time}.</trans>
+    </entry>
+    <entry>
+        <base>MATCH_HEADER</base>
+        <trans>Displaying lines matching: "{$matchPattern}".</trans>
+    </entry>
+    <entry>
+        <base>HIGHLIGHT_HEADER</base>
+        <trans>Highlighting lines matching: "{$highlightPattern}".</trans>
+    </entry>
+    <entry>
+        <base>NO_MATCHING_LINES</base>
+        <trans>No matching lines displayed.</trans>
+    </entry>
+    <entry>
+        <base>FILENAME_ERROR</base>
+        <trans><![CDATA[ <p>Error while specifying log file name.</p> <p>Invalid report type "{$filename}".</p> ]]></trans>
+    </entry>
+    <entry>
+       <base>REFRESH</base>
+       <trans>Refresh this logfile</trans>
+    </entry>
+    <entry>
+       <base>OP_DESC</base>
+       <trans><![CDATA[ <p>You must choose between viewing the logfile in your browser, or downloading the logfile to your computer. If the logfile is particularly large, you may wish to download it instead of attempting to open it in your browser, as this is a problem for some web browsers.</p> ]]></trans>
+    </entry>
+    <entry>
+       <base>OP_LABEL</base>
+       <trans>Operation</trans>
+    </entry>
+    <entry>
+       <base>DOWNLOAD_PAGE_DESC</base>
+       <trans><![CDATA[ <p>Your logfile download is now prepared. It will proceed as soon as you click on the &quot;Next&quot; button below, and instruct your browser to accept the download via the pop-up window that will appear.</p> ]]></trans>
+    </entry>
+    <entry>
+       <base>DOWNLOAD_FILE</base>
+       <trans>Preparing to download the logfile {$logfile}.</trans>
+    </entry>
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/workgroup       1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/workgroup        2008-10-13 00:25:24.000000000 -0600
@@ -0,0 +1,58 @@
+<lexicon lang="ja">
+    <entry>
+        <base>FORM_TITLE</base>
+        <trans>Change workgroup settings</trans>
+    </entry>   
+    <entry> 
+        <base>DESC_WORKGROUP</base>
+        <trans><![CDATA[ Enter the name of the Windows workgroup that this server should appear in. ]]></trans>        
+    </entry>
+    <entry>
+        <base>LABEL_WORKGROUP</base>
+        <trans>Windows workgroup</trans>
+    </entry>
+    <entry>
+        <base>DESC_SERVERNAME</base>
+        <trans>Enter the name that this server should use for Windows and Macintosh file sharing.</trans>
+    </entry>
+    <entry>
+        <base>LABEL_SERVERNAME</base>
+        <trans>Server Name</trans>
+    </entry>
+    <entry>
+        <base>DESC_PDC</base>
+        <trans><![CDATA[Should this server act as the workgroup and domain controller on your Windows network? You should leave this set to <b>No</b> if another server is already performing this role on your network.]]></trans>
+    </entry>
+    <entry>
+        <base>LABEL_PDC</base>
+        <trans>Workgroup and Domain Controller</trans>
+    </entry>
+    <entry>
+        <base>DESC_ROAM</base>
+        <trans><![CDATA[ Should this server support roaming profiles? You should leave this set to the default of <b>No</b> unless you have experience administering server-based Windows roaming profiles and know that this feature is required. ]]></trans>
+    </entry>
+    <entry>
+        <base>LABEL_ROAM</base>
+        <trans>Roaming profiles</trans>
+    </entry>
+    <entry>
+        <base>SUCCESS</base>
+        <trans>The new workgroup settings have been saved</trans>
+    </entry>
+    <entry>
+        <base>INVALID_WORKGROUP</base>
+        <trans>The workgroup name must begin with a letter (upper or lower case), followed by any combination of letters, numbers, underscores, periods and hyphens.</trans>
+    </entry>
+    <entry>
+        <base>INVALID_SERVERNAME</base>
+        <trans>The server name must begin with a letter (upper or lower case), followed by any combination of letters, numbers, underscores and hyphens.</trans>
+    </entry>
+    <entry>
+        <base>INVALID_WORKGROUP_MATCHES_SERVERNAME</base>
+        <trans>The server and workgroup names match, when compared in lower case. These values must be different in order for filesharing to be turned on.</trans>
+    </entry>
+    <entry>
+        <base>Workgroup</base>
+        <trans>Workgroup</trans>
+    </entry>
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/yum     1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/yum      2008-10-13 00:25:30.000000000 -0600
@@ -0,0 +1,154 @@
+<lexicon lang="ja"> 
+    <!-- vim: ft=xml:
+    -->
+    <entry>
+       <base>Software installer</base>
+       <trans>Software installer</trans>
+    </entry>
+
+    <entry>
+        <base>SUCCESS</base>
+        <trans>The new settings have been saved.</trans>
+    </entry>
+
+    <entry>
+        <base>LABEL_YUM_STATUS</base>
+        <trans>Check for updates daily</trans>
+    </entry>
+
+    <entry>
+       <base>LABEL_YUM_AUTOINSTALLUPDATES</base>
+       <trans>Automatically install updates</trans>
+   </entry>
+
+    <entry>
+       <base>LABEL_YUM_PACKAGEFUNCTIONS</base>
+       <trans>Manage individual packages</trans>
+    </entry>
+
+    <entry>
+       <base>DESC_YUM_PACKAGEFUNCTIONS</base>
+       <trans>The software installer can manage groups of related package or individual packages. By default, only groups of packages are presented. If you wish to manage individual packages, enable this option. This should only be done by experienced administrators.</trans>
+    </entry>
+
+    <entry>
+       <base>LABEL_ENABLED_REPOSITORIES</base>
+       <trans>Enabled repositories</trans>
+    </entry>
+
+    <entry>
+       <base>DESC_ENABLED_REPOSITORIES</base>
+       <trans>The software installer can install software from any of enabled repositories. To enable a repository, select it from the list. To disable a repository, de-select it from the list. By default, only stable, tested software is available for installation.</trans>
+    </entry>
+
+    <entry>
+        <base>DESC_UPTODATE</base>
+        <trans><![CDATA[ <div class="success"> <h2>This system is up to date.</h2> All updates have been installed. </div> ]]></trans>
+    </entry>
+
+    <entry>
+        <base>DESC_UPDATES_AVAILABLE</base>
+        <trans><![CDATA[ <div class="success"> <h2>Updates Available</h2> There are updates available for your system. These updates should be installed as soon as possible. </div> ]]></trans>
+    </entry>
+
+    <entry>
+        <base>LABEL_AVAILABLE_UPDATES</base>
+        <trans>Updates available</trans>
+    </entry>
+
+    <entry>
+        <base>DESC_AVAILABLE_UPDATES</base>
+        <trans>The following updates are available for your system. You should normally install all available updates. If there are updates you do not wish to install, de-select them from the list below.</trans>
+    </entry>
+
+    <entry>
+        <base>INSTALL_UPDATES</base>
+        <trans>Install selected updates</trans>
+    </entry>
+
+    <entry>
+        <base>DESC_BUTTON_INSTALL_UPDATES</base>
+        <trans><![CDATA[ <a class="button-like" href="yum?page=0&page_stack=&Next=Next&wherenext=YUM_PAGE_INSTALL_UPDATES">Install available updates</a> ]]></trans>
+    </entry>
+
+    <entry>
+       <base>HEADER_AVAILABLE_SOFTWARE</base>
+       <trans>The following software is available to be installed onto your system. You should only install additional software onto this system if you are aware of the consequences of doing so.</trans>
+    </entry>
+
+    <entry>
+       <base>DESC_AVAILABLE_GROUPS</base>
+       <trans>You can select software groups to install from the list below.</trans>
+    </entry>
+
+    <entry>
+       <base>LABEL_AVAILABLE_GROUPS</base>
+       <trans>Available groups</trans>
+    </entry>
+
+    <entry>
+       <base>DESC_AVAILABLE_PACKAGES</base>
+       <trans>You can also select individual packages to install from the list below.</trans>
+    </entry>
+
+    <entry>
+       <base>LABEL_AVAILABLE_PACKAGES</base>
+       <trans>Available packages</trans>
+    </entry>
+
+    <entry>
+       <base>INSTALL_SOFTWARE</base>
+       <trans>Install</trans>
+    </entry>
+
+    <entry>
+       <base>HEADER_INSTALLED_SOFTWARE</base>
+       <trans>The following software is installed on this system. You should only remove software from this system if you are aware of the consequences of doing so.</trans>
+    </entry>
+
+    <entry>
+       <base>DESC_INSTALLED_GROUPS</base>
+       <trans>You can select software groups to remove from the list below.</trans>
+    </entry>
+
+    <entry>
+       <base>LABEL_INSTALLED_GROUPS</base>
+       <trans>Installed groups</trans>
+    </entry>
+
+    <entry>
+       <base>DESC_INSTALLED_PACKAGES</base>
+       <trans>You can also select individual packages you wish to remove from the list below.</trans>
+    </entry>
+
+    <entry>
+       <base>LABEL_INSTALLED_PACKAGES</base>
+       <trans>Installed packages</trans>
+    </entry>
+
+    <entry>
+        <base>DESC_BUTTON_CONFIGURATION</base>
+        <trans><![CDATA[ <a class="button-like" href="yum?page=0&page_stack=&Next=Next&wherenext=YUM_PAGE_CONFIGURATION">Change software installer settings</a> ]]></trans>
+    </entry>
+
+    <entry>
+        <base>DESC_BUTTON_INSTALL_AVAILABLE</base>
+        <trans><![CDATA[ <a class="button-like" href="yum?page=0&page_stack=&Next=Next&wherenext=YUM_PAGE_INSTALL_AVAILABLE">Install additional software</a> ]]></trans>
+    </entry>
+
+    <entry>
+        <base>DESC_BUTTON_REMOVE</base>
+        <trans><![CDATA[ <a class="button-like" href="yum?page=0&page_stack=&Next=Next&wherenext=YUM_PAGE_REMOVE">Remove installed software</a> ]]></trans>
+    </entry>
+
+    <entry>
+       <base>HEADER_POSTUPGRADE_REQUIRED</base>
+       <trans><![CDATA[ The system needs to be reconfigured after adding or removing software, or applying updates. <p> Please click on the Reconfigure button at the bottom of this page to start the reconfiguration process. <b>An automatic reboot will be initiated as part of this reconfiguration process</b> </p> ]]></trans>
+     </entry>
+
+    <entry>
+       <base>SYSTEM_BEING_RECONFIGURED</base>
+       <trans>Your system is being automatically rebooted to complete the reconfiguraton process.</trans>
+    </entry>
+
+</lexicon>
--- smeserver-locale-2.0.0/root/etc/e-smith/locale/ja/etc/e-smith/web/panels/password/cgi-bin/userpassword      1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/panels/password/cgi-bin/userpassword       2008-10-13 00:25:14.000000000 -0600
@@ -0,0 +1,8 @@
+<lexicon lang="ja">
+
+    <entry>
+      <base>DESCRIPTION</base>
+      <trans><![CDATA[ <P>To change your account password, please fill out the following form. You will need to provide the name of your account, your old password, and your desired new password. (You must type the new password twice.)</P> <P>If you cannot change your password because you have forgotten the old one, your local system administrator can reset your password using the <EM>server manager</EM>.</P> ]]></trans>
+    </entry>
+
+</lexicon>
--- smeserver-locale-2.0.0/po/ja/adminQuotaSummary.tmpl.po      1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/po/ja/adminQuotaSummary.tmpl.po       2008-10-13 00:22:17.000000000 -0600
@@ -0,0 +1,41 @@
+msgid ""
+msgstr ""
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/adminQuotaSummary.tmpl:11
+msgid "System Administrator"
+msgstr ""
+
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/adminQuotaSummary.tmpl:13
+msgid "Automated quota report"
+msgstr ""
+
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/adminQuotaSummary.tmpl:16
+msgid "One or more users have exceeded their disk quota"
+msgstr ""
+
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/adminQuotaSummary.tmpl:23
+msgid "The following users have exceeded their disk quota on the server called"
+msgstr ""
+
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/adminQuotaSummary.tmpl:24
+msgid "All values are in megabytes."
+msgstr ""
+
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/adminQuotaSummary.tmpl:28
+msgid "Account"
+msgstr ""
+
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/adminQuotaSummary.tmpl:29
+msgid "Usage"
+msgstr ""
+
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/adminQuotaSummary.tmpl:30
+msgid "Limit with grace period"
+msgstr ""
+
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/adminQuotaSummary.tmpl:31
+msgid "Absolute limit"
+msgstr ""
--- smeserver-locale-2.0.0/po/ja/backup.po      1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/po/ja/backup.po       2008-10-13 00:22:17.000000000 -0600
@@ -0,0 +1,14 @@
+msgid ""
+msgstr ""
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: root/etc/e-smith/templates/etc/crontab/backup:16
+msgid "Backup task is disabled"
+msgstr ""
+
+#: root/etc/e-smith/templates/etc/crontab/backup:33
+#: root/etc/e-smith/templates/etc/crontab/backup:34
+msgid "Remember to load the backup tape!"
+msgstr ""
--- smeserver-locale-2.0.0/po/ja/foot.tmpl.po   1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/po/ja/foot.tmpl.po    2008-10-13 00:22:17.000000000 -0600
@@ -0,0 +1,9 @@
+msgid ""
+msgstr ""
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: root/etc/e-smith/templates/etc/e-smith/web/common/foot.tmpl/25Copyright:7
+msgid "All rights reserved."
+msgstr ""
--- smeserver-locale-2.0.0/po/ja/server-console.po      1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/po/ja/server-console.po       2008-10-13 00:22:17.000000000 -0600
@@ -0,0 +1,1404 @@
+msgid ""
+msgstr ""
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: root/sbin/e-smith/console:88
+msgid "Server console"
+msgstr ""
+
+#: root/sbin/e-smith/console:91
+msgid "** unsaved changes **"
+msgstr ""
+
+#: root/sbin/e-smith/console:98
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:32
+msgid "Welcome to the server console!"
+msgstr ""
+
+#: root/sbin/e-smith/console:100
+msgid "Use the Arrow and Tab keys to make your selection, then press Enter."
+msgstr ""
+
+#: root/sbin/e-smith/console:102
+msgid "Exit"
+msgstr "終了"
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:15
+msgid "Manage disk redundancy"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:39
+msgid "Disk redundancy status as of"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:40
+msgid "Current RAID status:"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:50
+msgid "There are no RAID devices configured"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:82
+msgid "A RAID resynchronization is in progress."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:89
+msgid "All RAID devices are in clean state"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:96
+msgid "Only some of the RAID devices are unclean."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:98
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:130
+msgid "Manual intervention may be required."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:110
+msgid "Current disk status:"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:111
+msgid "Installed disks"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:113
+msgid "Used disks"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:115
+msgid "Free disks"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:120
+msgid "Your system only has a single disk drive installed or is using hardware mirroring. If you would like to enable software mirroring, please shut down, install a second disk drive (of the same capacity) and then return to this screen."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:128
+msgid "The free disk count must equal one."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:141
+msgid "There is an unused disk drive in your system. Do you want to add it to the existing RAID array(s)?"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:143
+msgid "WARNING: ALL DATA ON THE NEW DISK WILL BE DESTROYED!"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:153
+msgid "The command failed:"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:155
+msgid "This configuration is not yet fully supported in these screens."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:165
+msgid "Couldn't open"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:182
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:195
+msgid "Couldn't call"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/manageRAID.pl:233
+msgid "Couldn't read"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/reboot.pl:11
+msgid "Reboot, reconfigure or shut down this server"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/reboot.pl:36
+#: root/sbin/e-smith/console-menu-items/reboot.pl:62
+msgid "Reboot"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/reboot.pl:36
+msgid "Reboot this server"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/reboot.pl:37
+#: root/sbin/e-smith/console-menu-items/reboot.pl:67
+msgid "Reconfigure"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/reboot.pl:37
+msgid "Reconfigure this server"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/reboot.pl:38
+#: root/sbin/e-smith/console-menu-items/reboot.pl:57
+msgid "Shutdown"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/reboot.pl:38
+msgid "Shutdown this server"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/reboot.pl:43
+msgid "Reboot, reconfigure or shutdown this server"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/reboot.pl:45
+msgid "Please select whether you wish to reboot, reconfigure or shutdown. The process will start as soon as you make your selection."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/reboot.pl:47
+msgid "If you have an older computer without power management, the shutdown process will perform a clean halt of all system services, but will not actually power off your computer. In this case, wait for the power down message and then shut off the power manually."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/reboot.pl:49
+msgid "If you have changed your mind and do not want to reboot or shutdown, use the Tab key to select Cancel, then press Enter."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/reboot.pl:51
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:147
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:185
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_restore.pm:35
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_restore.pm:78
+msgid "Cancel"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/reboot.pl:52
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:186
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_restore.pm:79
+msgid "OK"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/serverManager.pl:11
+#: root/sbin/e-smith/console-menu-items/serverManager.pl:37
+msgid "Access server manager"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/serverManager.pl:39
+msgid "This option will start a text-mode browser to access the server manager from this console.  Normally you would access the server manager from a web browser at the following url:"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/serverManager.pl:43
+msgid "You should only proceed if you are comfortable using a text-mode browser.  Note that you will be prompted for the administrator password in order to access the server manager."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/serverManager.pl:45
+msgid "NOTE: The 'q' key is used to quit from the text-mode browser."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/serverManager.pl:47
+msgid "Do you wish to proceed?"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/status.pl:11
+msgid "Check status of this server"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/status.pl:60
+msgid "Status of this server as of"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/status.pl:62
+msgid "This server has been running for"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/status.pl:63
+msgid "days"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/status.pl:64
+msgid "hours"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/status.pl:65
+msgid "minutes"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/support.pl:11
+msgid "View support and licensing information"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/support.pl:39
+msgid "Mitel Networks Corporation support and licensing information"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/support.pl:44
+msgid "You can scroll through this document using the up and down arrow keys or the Page Up and Page Down keys."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/testInternet.pl:10
+#: root/sbin/e-smith/console-menu-items/testInternet.pl:33
+msgid "Test Internet access"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/testInternet.pl:35
+msgid "After your Internet connection is operational and your server has been connected and configured, this test will verify that your server can communicate with the Internet."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/testInternet.pl:37
+msgid "As part of this test, two pieces of information will be sent to contribs.org - the version installed on your server and a string used to differentiate your server from others using this test. This string is generated by a one-way hash function and access to the string does not provide any information about your server."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/testInternet.pl:39
+msgid "We appreciate your assistance in sending this information so we can gain an accurate count of the installed servers."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/testInternet.pl:41
+msgid "Do you wish to run the test?"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/testInternet.pl:47
+msgid "Attempting to test Internet connection."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/testInternet.pl:48
+msgid "If this test takes too long, please halt it by typing Ctrl-C."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/testInternet.pl:55
+msgid "Internet connection successful"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/testInternet.pl:57
+msgid "The test was successful! Your server was able to communicate with contribs.org."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/testInternet.pl:64
+msgid "Internet connection failed"
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/testInternet.pl:66
+msgid "The test failed. Your server was unable to establish contact with contribs.org via the Internet."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/testInternet.pl:68
+msgid "Please check that your server is correctly configured. A reboot may be required if certain settings are modified and the configuration process will advise you if this is required."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/testInternet.pl:70
+msgid "You might also want to check with your Internet provider to make sure that your Internet connection is working properly."
+msgstr ""
+
+#: root/sbin/e-smith/console-menu-items/testInternet.pl:72
+msgid "It is also possible (although unlikely) that there is a technical problem at the contribs.org site. In this case, you should proceed with your installation and run this test again later."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:86
+msgid "Bad ttyname:"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:89
+msgid "Can't redirect stdin"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:90
+msgid "Can't redirect stdout"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:93
+msgid "Can't fork"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:143
+msgid "Couldn't create pipe"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:149
+msgid "Couldn't fork"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:160
+msgid "Couldn't close reading end of pipe"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:168
+msgid "Couldn't connect STDERR to pipe"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:171
+msgid "Couldn't close writing end of pipe"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:185
+msgid "Couldn't exec:"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:237
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:269
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:292
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:353
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:414
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:168
+msgid "Back"
+msgstr "戻る"
+
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:238
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:270
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:293
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:354
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:415
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:146
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_restore.pm:34
+msgid "Next"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:264
+msgid "please try again"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:321
+msgid "Yes"
+msgstr "はい"
+
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:322
+msgid "No"
+msgstr "いいえ"
+
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:439
+msgid "Keep the current setting"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console.pm:441
+msgid "keep"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/backup_running.pm:30
+msgid "Inconsistent system state"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/backup_running.pm:32
+msgid "********** Inconsistent system state detected ***********"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/backup_running.pm:34
+msgid "The restoration of a system backup was running and incomplete at the time of the last reboot. The system should not be used in this state."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/backup_running.pm:36
+msgid "Consult the User Guide for further instructions."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/backup_running.pm:41
+msgid "System will be halted"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/backup_running.pm:43
+msgid "The server will now be halted."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/backup_running.pm:45
+msgid "Consult the User Guide for recovery instructions."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/backup_running.pm:47
+msgid "Do you wish to halt the system right now?"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:19
+msgid "Configure this server"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:90
+msgid "Use"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:91
+msgid "for chipset"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:104
+msgid "Manually select driver for %s ethernet adapter"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:111
+msgid "Select %s network ethernet driver"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:115
+msgid "You now need to select the proper driver for your %s network ethernet adapter. The server can attempt to do this automatically, or you can do it manually - either by specifying the model of your ethernet adapter or by directly choosing a driver.\n"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:157
+msgid "unknown"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:161
+msgid "Choose driver by specifying ethernet adapter model"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:162
+msgid "Choose driver directly"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:167
+msgid "Select %s adapter manually"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:168
+msgid "Please select one of the following:"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:188
+msgid "Specify %s adapter and driver"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:190
+msgid "Please specify your %s ethernet adapter and corresponding driver"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:214
+msgid "Specify %s ethernet driver"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:215
+msgid "Please specify the driver to use for the %s ethernet adapter"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:259
+msgid "Primary domain name"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:261
+msgid "Please enter the primary domain name for your server."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:263
+msgid "This will be the default domain for your e-mail and web server. Virtual domains can be added later using the server manager."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:289
+msgid "Invalid domain name"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:307
+msgid "Select system name"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:309
+msgid "Please enter the system name for your server."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:311
+msgid "You should select unique system names for each server."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:313
+msgid "The system name must start with a letter and can be composed of  letters, numbers and hyphens."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:332
+msgid "Invalid system name"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:345
+msgid "The specified driver failed to load."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:381
+msgid "Local networking parameters"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:383
+msgid "Please enter the local IP address for this server."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:385
+msgid "If this server is the first machine on your network, we recommend accepting the default value unless you have a specific reason to choose something else."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:387
+msgid "If your server is being installed into an existing network, you must choose an address which is not in use by any other computer on this network."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:409
+msgid "Invalid local IP address"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:422
+msgid "Select local subnet mask"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:424
+msgid "Please enter the local subnet mask for this server."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:426
+msgid "If this server is the first machine on your network, we recommend using the default unless you have a specific reason to choose something else."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:428
+msgid "If your server is being installed into an existing network, you must choose the same subnet mask used by other computers on this network."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:451
+msgid "Invalid local subnet mask"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:468
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:483
+msgid "Server and gateway"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:473
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:484
+msgid "Private server and gateway"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:478
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:485
+msgid "Server-only"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:490
+msgid "Select operation mode"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:493
+msgid "If you want this server to act as a gateway to the Internet, choose one of the server and gateway options. Server and gateway mode acts as a firewall and provides an external web and mail server. Private server and gateway mode also acts as a firewall but disables all incoming services."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:495
+msgid "Server-only mode provides services to a local, protected network. If you choose this mode and Internet access is required, the network must be protected by another server configured in server and gateway mode (or another firewall)."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:541
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:551
+msgid "Server and gateway - dedicated"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:546
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:552
+msgid "Server and gateway - dialup"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:557
+msgid "Select external access mode"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:560
+msgid "The next step is to select the access mode that your server will use to connect to the Internet."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:562
+msgid "Choose the dedicated option if you access the Internet via a router, a cable modem or ADSL. Choose the dialup option if you use a modem or ISDN connection."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:591
+msgid "Only one network adapter"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:593
+msgid "Your system only has a single network adapter. It cannot be used in this configuration."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:631
+msgid "eth0 is local, eth1 is external"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:631
+msgid "normal"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:632
+msgid "eth1 is local, eth0 is external"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:632
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:648
+msgid "swapped"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:637
+msgid "Select ethernet card assignment"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:640
+msgid "You have two Ethernet cards which use the same driver. The server will automatically designate one for your local network (called eth0) and one for your external Internet connection (called eth1). If this default assignment is not appropriate for your situation, you can select the opposite assignment using swapped mode. Most installations can accept the default setting of normal."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:642
+msgid "Please select whether you want to operate in normal or swapped mode."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:670
+msgid "use DHCP (send account name as client identifier)"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:671
+msgid "DHCP with account name"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:677
+msgid "use DHCP (send ethernet address as client identifier)"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:678
+msgid "DHCP with ethernet address"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:684
+msgid "use PPP over Ethernet (PPPoE)"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:685
+msgid "PPPoE"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:691
+msgid "use static IP address (do not use DHCP or PPPoE)"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:692
+msgid "static IP"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:697
+msgid "Use DHCP (send account name as client identifier)"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:698
+msgid "Use DHCP (send ethernet address as client identifier)"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:699
+msgid "Use PPP over Ethernet (PPPoE)"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:700
+msgid "Use static IP address"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:705
+msgid "External Interface Configuration"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:708
+msgid "Next, specify how to configure the external ethernet adapter."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:710
+msgid "For cable modem connections, select DHCP. If your ISP has assigned a system name for your connection, use the account name option. Otherwise use the ethernet address option. For residential ADSL, use PPPoE. For most corporate connections, use a static IP address."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:763
+msgid "Enter ISP assigned hostname"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:765
+msgid "You have selected DHCP (send account name). Please enter the account name assigned by your ISP. You must enter the account name exactly as specified by your ISP."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:782
+msgid "Select PPPoE user account"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:784
+msgid "Please enter the user account name for your PPPoE Internet connection. Most PPPoE service providers use an account name and e-mail domain. For example, "
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:802
+msgid "Select PPPoE password"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:804
+msgid "Please enter the password for your PPPoE Internet connection."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:823
+msgid "Cannot read directory"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:875
+msgid "Do not use a dynamic DNS service"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:876
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:878
+msgid "free service"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:877
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:879
+msgid "commercial service"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:880
+msgid "custom DynDNS service"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:885
+msgid "Select dynamic DNS service"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:888
+msgid "Please specify whether you wish to subscribe to a dynamic DNS service. Such services allow you to have a domain name without a static IP address, and are available from various organizations for free or for a reasonable charge. A notification must be sent to the dynamic DNS service whenever your IP address changes. Your server can automatically do this for some dynamic DNS services."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:890
+msgid "Choose which dynamic DNS service you would like to use."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:942
+msgid "Select dynamic DNS account"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:943
+msgid "Please enter the account name for your dynamic DNS service"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:970
+msgid "Select dynamic DNS password"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:971
+msgid "Please enter the password for your dynamic DNS service"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1001
+msgid "Select static IP address"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1003
+msgid "You have chosen to configure your external Ethernet connection with a static IP address. Please enter the IP address which should be used for the external interface on this server."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1005
+msgid "Please note, this is not the address of your external gateway."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1026
+msgid "Invalid external IP address"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1040
+msgid "Select subnet mask"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1042
+msgid "Please enter the subnet mask for your Internet connection. A typical subnet mask is 255.255.255.0."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1063
+msgid "Invalid external subnet mask"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1086
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1697
+msgid "Select gateway IP address"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1088
+msgid "Please enter the gateway IP address for your Internet connection."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1113
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1733
+msgid "Invalid"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1129
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1130
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1131
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1132
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1133
+msgid "Set modem port to"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1133
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1167
+msgid "ISDN"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1134
+msgid "internal ISDN card"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1139
+msgid "Select modem/ISDN port"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1142
+msgid "Please specify which serial port your modem or ISDN terminal adapter is connected to. Select ISDN if you wish to use an internal ISDN card."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1320
+msgid "ISDN card detected"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1322
+msgid "Do you wish to use the following ISDN card for your Internet connection?"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1338
+msgid "ISDN driver options"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1340
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1404
+msgid "You have selected an internal ISDN card."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1342
+msgid "The ISDN software will need to be told what ISDN hardware you have. It may also need to be told what protocol number to use and may need to be given some additional information about your hardware such as the I/O address and interrupt settings."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1344
+msgid "This information is provided via an options string. An example is"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1346
+msgid "which would be used to set the"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1348
+msgid "to EURO-ISDN."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1374
+msgid "Multiple Subscriber Numbering"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1376
+msgid "Your ISDN line may have more than one number associated with it known as Multiple Subscriber Numbering (MSN). In order to receive an incoming ISDN call from an ISP or a remote site, you may need to configure your ISDN card with its MSN so that ISDN calls are routed correctly. If you do not know this number, you can leave this value blank."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1386
+msgid "Invalid Multiple Subscriber Numbering (MSN)"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1406
+msgid "The driver for this card includes modem emulation software, and modem control commands are used by the networking software to configure and control the ISDN interface card."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1408
+msgid "The precise behavior of your ISDN card can be modified by using a specific modem initialization string, to adjust the settings of the card, or to modify its default behavior. Most cards should work correctly with the default settings, but you may enter a modem initialization string here if required."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1411
+msgid "You have selected a modem device."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1413
+msgid "The precise behavior of your modem can be modified by using a specific modem initialization string, to adjust the settings of your modem, or to modify its default behavior. You may enter a modem initialization string here."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1415
+msgid "Many modems will work correctly without any special settings. If you leave this field blank, the default string of"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1417
+msgid "will be used. This turns the modem speaker off, so that you will not be bothered by the noises that a modem makes when it starts a connection."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1423
+msgid "Modem initialization string"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1456
+msgid "Select access phone number"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1459
+msgid "Please enter the access phone number for your Internet connection. Long distance numbers can be entered. The phone number must not contain spaces, but may contain dashes for readability. Commas may be inserted where a delay is required. For example, if you need to dial 9 first, then wait, then dial a phone number, you could enter"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1486
+msgid "Invalid access phone number"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1498
+msgid "Please enter the user account name for your Internet connection."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1500
+msgid "Please note that account names are usually case sensitive."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1504
+msgid "Select dialup user account"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1520
+msgid "Please enter the password for your Internet connection."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1522
+msgid "Please note that passwords are usually case sensitive."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1526
+msgid "Select dialup password"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1568
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1592
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1614
+msgid "Select connect policy"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1571
+msgid "Select the dialup connect policy that you would like to use during office hours (8:00 AM to 6:00 PM) on weekdays."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1595
+msgid "Please select the dialup connect policy that you would like to use outside office hours (6:00 PM to 8:00 AM) on weekdays."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1617
+msgid "Please select the dialup connect policy that you would like to use during the weekend."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1642
+msgid "Enable NIC bonding"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1642
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1656
+msgid "enabled"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1643
+msgid "Disable NIC bonding"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1643
+msgid "disabled"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1648
+msgid "NIC Bonding"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1651
+msgid "You have more than one network adapter. Would you like to bond them together into a single interface? This can provide greater throughput and/or failure resiliency, depending on your adapters and network configuration."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1667
+msgid ""
+"The NIC bonding driver allows various modes and performance options. Edit the option string below if the defaults are not suitable.\n"
+"\n"
+"Most users do not need to change this setting.\n"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1671
+msgid "NIC Bonding Options"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1699
+msgid "In server-only mode, this server will use only one ethernet adapter connected to your local network. If you have a firewall and wish to use this server as your e-mail/web server, you should consult the firewall documentation for networking details."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1701
+msgid "Please specify the gateway IP address that this server should use to access the Internet. Leave blank if you have no Internet access."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1776
+msgid "Can't open output file"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1797
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1802
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1823
+msgid "Off"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1797
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1801
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1818
+msgid "On"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1801
+msgid "Provide DHCP service to local network"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1802
+msgid "Do not provide DHCP service to local network"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1807
+msgid "Select DHCP server configuration"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1810
+msgid "Please specify whether you would like this server to provide DHCP service to your local network. This will let you assign IP addresses to your other network computers automatically by configuring them to obtain their IP information using DHCP."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1812
+msgid "We strongly advise that all clients are configured using DHCP."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1846
+msgid "Select beginning of DHCP host number range"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1848
+msgid "You must reserve a range of host numbers for the DHCP server to use."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1850
+msgid "Please enter the first host number in this range. If you are using the standard server defaults and have no particular preference, you should keep the default values."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1872
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1955
+msgid "That address is not on the local network."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1877
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1960
+msgid "Invalid IP address for DHCP start"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1883
+msgid "You must provide an IP address for the start of the DHCP range."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1909
+msgid "Select end of DHCP host number range"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1911
+msgid "Please enter the last host address in this range. If you are using the standard server defaults and have no particular preference, you should keep the default value."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1943
+msgid "The IP range cannot include our private network address."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1949
+msgid "The end of the range must be larger than the start."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1966
+msgid "You must provide an IP address for the end of the DHCP range."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1986
+msgid "Corporate DNS server address"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1988
+msgid "If this server does not have access to the Internet, or you have special requirements for DNS resolution, enter the DNS server IP address here."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1990
+msgid "This field should be left blank unless you have a specific reason to configure another DNS server."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:1992
+msgid "You should not enter the address of your ISP's DNS servers here, as the server is capable of resolving all Internet DNS names without this additional configuration."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:2022
+msgid "Invalid IP address for DNS forwarder"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:2038
+msgid "No unsaved changes"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:2040
+msgid "No changes were made during the configuration process"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:2042
+msgid "Press ENTER to proceed."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:2043
+msgid "Finish"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:2056
+msgid "Changes will take effect after reboot"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:2058
+msgid "The new configuration will take effect when you reboot the server."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:2060
+msgid "Do you wish to reboot right now?"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:2075
+msgid "Activate configuration changes"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:2077
+msgid "Your configuration changes will now be activated. The configuration files on this server will be changed to reflect your new settings. This may take a few minutes."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:2079
+msgid "Do you wish to activate your changes?"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:2092
+#: root/usr/lib/perl5/site_perl/esmith/console/save_config.pm:26
+msgid "Activating configuration settings"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:2093
+#: root/usr/lib/perl5/site_perl/esmith/console/save_config.pm:27
+msgid "Please stand by while your configuration settings are activated ..."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:2124
+#: root/usr/lib/perl5/site_perl/esmith/console/quitConsole.pm:34
+msgid "*** THERE ARE UNACTIVATED CHANGES - QUIT ANYWAY? ***"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:2126
+#: root/usr/lib/perl5/site_perl/esmith/console/quitConsole.pm:36
+msgid "Your configuration changes have been saved but have not yet been activated. This may result in unpredictable system behavior. We recommend that you complete the configuration process and activate the changes before exiting the console."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/configure.pm:2128
+#: root/usr/lib/perl5/site_perl/esmith/console/quitConsole.pm:38
+msgid "Are you sure you want to quit with unactivated changes?"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:16
+msgid "Perform backup to USB device"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:62
+msgid "Could not create backup file on device"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:122
+msgid "Backup returned non-zero"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:122
+msgid "Success"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:136
+msgid "Create Backup to USB disk"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:139
+msgid "Do you wish to create backup on USB device?"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:145
+msgid "Insert media to use for backup"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:149
+msgid "Insert memory stick or USB disk, then hit the enter key."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:167
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_restore.pm:59
+msgid "Backup medium not found"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:170
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_restore.pm:62
+msgid "No removable media or device found"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:182
+msgid "Choose device to use for backup"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:183
+msgid "Please select which device should be used for the backup file."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:204
+msgid "Preparing for backup"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:205
+msgid "Please stand by while the system is prepared for backup..."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:222
+msgid "Creating backup file"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:228
+msgid "Backup complete"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_backup.pm:230
+msgid "Remove memory stick or USB disk, then hit the enter key."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_restore.pm:22
+msgid "Restore From Backup"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_restore.pm:25
+msgid "Do you wish to restore from backup?"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_restore.pm:33
+msgid "Insert media containing backup"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_restore.pm:37
+msgid "Insert memory stick or CDROM containing your backup file, then hit the enter key."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_restore.pm:75
+msgid "Choose device to restore from"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_restore.pm:76
+msgid "Please select which device contains the backup file you wish to restore from."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_restore.pm:93
+msgid "Backup file not found"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_restore.pm:96
+msgid "No backup file found"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_restore.pm:106
+msgid "Start restore from backup"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_restore.pm:108
+msgid "Backup file found:"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_restore.pm:109
+msgid "bytes"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_restore.pm:109
+msgid "size"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/perform_restore.pm:111
+msgid "Do you wish to restore from this file?"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/quitConsole.pm:10
+msgid "Exit from the server console"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:30
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:109
+msgid "Choose administrator password"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:34
+msgid "You will now be taken through a sequence of screens to perform basic networking configuration on this server."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:36
+msgid "You can make your selections in each screen using the Arrow and Tab keys. At any point, if you select Back you will be returned to the previous screen."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:38
+msgid "Before you start, you must first choose the administrator password for your system and enter it below. You will not see the password as you enter it."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:45
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:117
+msgid "Administrator password not set"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:46
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:118
+msgid "Sorry, you must set the administrator password now."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:56
+msgid "Unprintable characters in password"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:57
+msgid "The password must contain only printable characters."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:70
+msgid "it is based on your username"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:71
+msgid "it is based upon your password entry"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:72
+msgid "it is derived from your password entry"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:73
+msgid "it is derivable from your password entry"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:74
+msgid "it is too short"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:75
+msgid "it is all whitespace"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:76
+msgid "it is too simplistic/systematic"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:77
+msgid "it is based on a dictionary word"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:78
+msgid "it is based on a (reversed) dictionary word"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:79
+msgid "it does not contain numbers"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:80
+msgid "it does not contain uppercase characters"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:81
+msgid "it does not contain lowercase characters"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:82
+msgid "it does not contain special characters"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:91
+msgid "Software error: password check failed"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:96
+msgid "Bad Password Choice"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:98
+msgid "The password you have chosen is not a good choice, because "
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:101
+msgid "Do you wish to choose a better one?"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:110
+msgid "Please type your administrator password again to verify."
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:128
+msgid "Passwords do not match"
+msgstr ""
+
+#: root/usr/lib/perl5/site_perl/esmith/console/system_password.pm:129
+msgid "The two passwords did not match"
+msgstr ""
--- smeserver-locale-2.0.0/po/ja/userOverQuota.tmpl.po  1969-12-31 17:00:00.000000000 -0700
+++ smeserver-locale-2.0.0.update/po/ja/userOverQuota.tmpl.po   2008-10-13 00:22:17.000000000 -0600
@@ -0,0 +1,47 @@
+msgid ""
+msgstr ""
+"MIME-Version: 1.0\n"
+"Content-Type: text/plain; charset=UTF-8\n"
+"Content-Transfer-Encoding: 8bit\n"
+
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/userOverQuota.tmpl:15
+msgid "Automated quota report"
+msgstr ""
+
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/userOverQuota.tmpl:17
+msgid "You have exceeded your disk quota"
+msgstr ""
+
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/userOverQuota.tmpl:19
+msgid "Your current disk usage:"
+msgstr ""
+
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/userOverQuota.tmpl:20
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/userOverQuota.tmpl:23
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/userOverQuota.tmpl:25
+msgid "Mb"
+msgstr ""
+
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/userOverQuota.tmpl:21
+msgid "Your maximum usage:"
+msgstr ""
+
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/userOverQuota.tmpl:22
+msgid " no limit set"
+msgstr ""
+
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/userOverQuota.tmpl:24
+msgid "Warnings start at:"
+msgstr ""
+
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/userOverQuota.tmpl:26
+msgid "Grace period ends:"
+msgstr ""
+
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/userOverQuota.tmpl:27
+msgid "System name:"
+msgstr ""
+
+#: root/etc/e-smith/templates/usr/lib/e-smith-quota/userOverQuota.tmpl:29
+msgid "You are currently using more disk space than you have been allotted. You have until the Grace Period above to remove files so that you no longer exceed the warning level. At no time will you be permitted to store more than the maximum usage indicated above. This disk allocation includes all your e-mail, including unread e-mail."
+msgstr ""