smeserver-locale/sme9/smeserver-locale-2.4.0-locale-2013-12-24.patch

--- smeserver-locale-2.4.0/root/etc/e-smith/locale/bg/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.529694567 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/bg/etc/e-smith/web/functions/backup   2013-12-24 00:32:21.870415864 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/bg/etc/e-smith/web/functions/emailsettings   2013-12-24 00:07:08.345696961 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/bg/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:51.923210415 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>Позволи HTTPS (сигурно)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Разрешаване на достъп само от локални мрежи</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>Позволи както POP3, така и POP3S</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/bg/etc/e-smith/web/functions/ibays   2013-12-24 00:07:08.345696961 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/bg/etc/e-smith/web/functions/ibays    2013-12-24 00:35:04.204243217 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Execution of dynamic content (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Force secure connections</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>Remove information bay</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/da/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.530694554 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/da/etc/e-smith/web/functions/backup   2013-12-24 00:32:22.330409703 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/da/etc/e-smith/web/functions/emailsettings   2013-01-31 14:31:55.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/da/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:52.192206815 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>Tillad HTTPS (sikret)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Tillad kun adgang fra lokalnet</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>Tillad både POP3 and POP3S</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/da/etc/e-smith/web/functions/ibays   2013-01-31 14:31:53.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/da/etc/e-smith/web/functions/ibays    2013-12-24 00:35:04.401240581 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Udfør dynamisk indhold (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Gennemtving sikker forbindelse</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>Fjern i-bay</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/de/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.531694541 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/de/etc/e-smith/web/functions/backup   2013-12-24 00:32:22.816403199 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/de/etc/e-smith/web/functions/emailsettings   2013-01-31 14:31:55.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/de/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:52.461203216 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>Aktiviert (nur sicherer HTTPS Zugang - empfohlen)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Zugang nur vom lokalem Netzwerk</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>POP3 und POP3S erlauben</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/de/etc/e-smith/web/functions/ibays   2013-12-24 00:07:08.351696883 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/de/etc/e-smith/web/functions/ibays    2013-12-24 00:35:04.599237932 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Ausführung dynamischer Inhalte(CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Direkte SMTP-Verbindungen zulassen</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>i-bay löschen</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/el/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.532694528 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/el/etc/e-smith/web/functions/backup   2013-12-24 00:32:23.298396744 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/el/etc/e-smith/web/functions/emailsettings   2013-01-31 14:31:55.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/el/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:52.759199228 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>Επιτρέπεται με ασφάλεια HTTPS</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Επιτρέπετε πρόσβασή μόνο απο το τοπικό δίκτυο</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>Επιτρέπεται POP3 και POP3S</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/el/etc/e-smith/web/functions/ibays   2013-01-31 14:31:47.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/el/etc/e-smith/web/functions/ibays    2013-12-24 00:35:04.794235323 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Εκτέλεση ενός δυναμικού περιεχομένου (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Force secure connections</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>Διαγραφή i-bay</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/es/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.532694528 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/es/etc/e-smith/web/functions/backup   2013-12-24 00:32:23.756390612 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/es/etc/e-smith/web/functions/emailsettings   2013-01-31 14:31:55.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/es/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:53.054195279 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>Permitir HTTPS (seguro)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Permitir acceso sólo desde redes locales</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>Permitir ambos POP3 y POP3S</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/es/etc/e-smith/web/functions/ibays   2008-10-07 09:28:33.000000000 -0600
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/es/etc/e-smith/web/functions/ibays    2013-12-24 00:35:04.994232647 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Ejecución de contenido dinámico (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Forzar conexiones seguras</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>Eliminar bahía de información</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/et/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.533694515 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/et/etc/e-smith/web/functions/backup   2013-12-24 00:32:24.210384534 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/et/etc/e-smith/web/functions/emailsettings   2013-12-24 00:07:08.354696844 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/et/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:53.325191652 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>Luba HTTPS (turvatud)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Luba juurdepääs ainult kohtvõrgust</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>Luba mõlemad POP3 ja POP3S</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/et/etc/e-smith/web/functions/ibays   2013-12-24 00:07:08.355696830 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/et/etc/e-smith/web/functions/ibays    2013-12-24 00:35:05.191230013 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Dünaamilise sisu käivitamine (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Force secure connections</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>Eemalda i- bay</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/fr/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.534694502 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/fr/etc/e-smith/web/functions/backup   2013-12-24 00:32:24.678378268 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Vous disposez de trois méthodes de sauvegarde et de restauration de votre serveur : sur votre ordinateur local, un lecteur/enregistreur de bandes ou un ordinateur distant sur votre réseau local.</P> <P>La première méthode crée une copie de la configuration du serveur et des données utilisateur puis les transfère sur votre ordinateur local, via votre navigateur Internet. Actuellement, la taille totale de ces données représente approximativement <b>$tarsize</b>. La taille du fichier de sauvegarde sera légèrement inférieure à ceci, en fonction de la compressibilité de ces données. Ce fichier peut être utilisé pour restaurer votre serveur depuis la console si vous le copiez sur un média de stockage tel qu.un disque amovible.</P><P>La méthode de sauvegarde sur bande exploite le programme <i>$module</i> pour sauvegarder quotidiennement l'intégralité du disque dur du serveur. Ceci nécessite l'emploi d'un lecteur/enregistreur de bandes reconnu et d'une bande non protégée en écriture. La sauvegarde est effectuée automatiquement à l'heure sélectionnée (un courriel de rappel est aussi envoyé automatiquement à l'administrateur). Actuellement, la taille totale utilisée sur le disque dur de votre serveur représente approximativement <b>$dumpsize</b>.</P> <p>La méthode de sauvegarde sur un ordinateur distant exploite le programme <i>dar</i> pour sauvegarder la configuration de votre serveur et les données utilisateur vers un ordinateur sur votre réseau local (ou un disque USB connecté au serveur). Ceci nécessite que vous disposiez d'un partage accessible en écriture (smbfs, cifs, ou nfs) sur l'ordinateur distant ou d'un disque USB sur le serveur. Vous pouvez définir le nombre de jeux de sauvegardes devant être conservés sur le partage, ainsi que la possibilité de créer des jeux de sauvegardes incrémentales sur plusieurs jours. La sauvegarde est effectuée automatiquement à l'heure sélectionnée. Actuellement, les fichiers de configuration et de données représentent approximativement <b>$tarsize</b> non compressés. Le partage de sauvegarde doit offrir deux fois la taille d'une sauvegarde non compressée.</p> <p>Toutes les méthodes de restauration vous permettent de restaurer la configuration du serveur et des données utilisateur. La sauvegarde sur un ordinateur distant permet de restaurer chaque fichier individuellement. <b>Idéalement, une restauration complète devrait être effectuée sur un serveur nouvellement installé</b>.</p> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/fr/etc/e-smith/web/functions/emailsettings   2013-12-24 00:07:08.357696804 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/fr/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:53.594188054 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>Autoriser HTTPS (accès sécurisé uniquement)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Autoriser HTTPS (sécuritaire) depuis les réseaux locaux</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>Autoriser POP3 et POP3S en accès privé et public</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/fr/etc/e-smith/web/functions/ibays   2008-10-07 09:28:33.000000000 -0600
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/fr/etc/e-smith/web/functions/ibays    2013-12-24 00:35:05.390227351 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Exécution de contenu dynamique (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Forcer l'utilisation de connexions sécurisées</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>Supprimer l'i-bay</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/fr/etc/e-smith/web/functions/initial.cgi     2008-10-07 09:28:31.000000000 -0600
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/fr/etc/e-smith/web/functions/initial.cgi      2013-12-24 00:35:13.111124055 -0700
@@ -6,7 +6,7 @@
 
     <entry>
        <base>FRAMES_BODY</base>
-       <trans><![CDATA[ <p>Bienvenue dans SME Server, la distribution Linux dédiée aux petites et moyennes entreprises. SME Server est mis à votre disposition par <A HREF="http://www.smeserver.org/" TARGET="_blank">SME Server, Inc.</A>, organisation à but non lucratif dont l'objectif est d'assurer la promotion, le support et l'existence légale de SME Server.</p> <p>SME Server est gratuitement exploitable, selon les termes de la Licence "GNU General Public License", et n'existe que grâce aux efforts de la communauté formée autour de SME Server. Toutefois, la disponibilité et la qualité de SME Server dépendent de notre capacité à régler nos dépenses telles que les coûts liés à l'hébergement, au serveur matériel, etc.</p> <p>De ce fait, nous demandons une petite contribution financière afin de couvrir nos dépenses et d'assurer les développements à venir.<p> <p><b>Veuillez aller sur <A HREF="http://www.smeserver.org/donate/" TARGET="_blank">http://www.smeserver.org/donate/</A> pour effectuer votre donation.</b></p> <p>Ce système d'exploitation ne dispose d'AUCUNE GARANTIE. Veuillez <a href="/server-manager/support/" target="main">cliquer ici</a> pour afficher les informations détaillées concernant le support technique, la garantie et la licence d'exploitation.</p> <p>Pour effectuer une tâche d'administration du système, cliquez sur l'un des liens dans le menu situé à la gauche de votre écran.</p> ]]></trans>
+       <trans><![CDATA[ <p>Bienvenue dans SME Server, la distribution Linux dédiée aux petites et moyennes entreprises. SME Server est mis à votre disposition par < <A HREF="http://www.smeserver.org/" TARGET="_blank">Koozali Foundation, Inc.</A>, organisation à but non lucratif dont l'objectif est d'assurer la promotion, le support et l'existence légale de SME Server.</p> <p>SME Server est gratuitement exploitable, selon les termes de la Licence "GNU General Public License", et n'existe que grâce aux efforts de la communauté formée autour de SME Server. Toutefois, la disponibilité et la qualité de SME Server dépendent de notre capacité à régler nos dépenses telles que les coûts liés à l'hébergement, au serveur matériel, etc.</p> <p>De ce fait, nous demandons une petite contribution financière afin de couvrir nos dépenses et d'assurer les développements à venir.<p> <p><b>Veuillez aller sur <A HREF="http://www.smeserver.org/donate/" TARGET="_blank">http://www.smeserver.org/donate/</A> pour effectuer votre donation.</b></p> <p>Ce système d'exploitation ne dispose d'AUCUNE GARANTIE. Veuillez <a href="/server-manager/support/" target="main">cliquer ici</a> pour afficher les informations détaillées concernant le support technique, la garantie et la licence d'exploitation.</p> <p>Pour effectuer une tâche d'administration du système, cliquez sur l'un des liens dans le menu situé à la gauche de votre écran.</p> ]]></trans>
     </entry>
 
     <entry>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/he/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.534694502 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/he/etc/e-smith/web/functions/backup   2013-12-24 00:32:25.138372106 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/he/etc/e-smith/web/functions/emailsettings   2013-01-31 14:31:55.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/he/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:53.859184504 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>Allow HTTPS (secure)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Allow HTTPS (secure) from local networks</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>Allow both POP3 and POP3S</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/he/etc/e-smith/web/functions/ibays   2013-01-31 14:31:53.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/he/etc/e-smith/web/functions/ibays    2013-12-24 00:35:05.588224701 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>החרגה של תוכן דינמי (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>שחזר הגדרות שרת</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>הסרת מפרץ מידע</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/hu/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.535694489 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/hu/etc/e-smith/web/functions/backup   2013-12-24 00:32:25.595365990 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/hu/etc/e-smith/web/functions/emailsettings   2013-01-31 14:31:55.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/hu/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:54.133180839 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>Engedélyezve HTTPS (biztonságos)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Hozzáférés csak helyi hálózatból</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>Engedélyezve POP3 és POP3S</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/hu/etc/e-smith/web/functions/ibays   2013-01-31 14:31:47.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/hu/etc/e-smith/web/functions/ibays    2013-12-24 00:35:05.788222024 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Dinamikus tartalom engedélyezése (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Force secure connections</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>Adattár eltávolítása</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/id/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.536694476 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/id/etc/e-smith/web/functions/backup   2013-12-24 00:32:26.050359896 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/id/etc/e-smith/web/functions/emailsettings   2013-01-31 14:31:55.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/id/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:54.403177224 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>Bolehkan HTTPS (aman)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Bolehkan akses hanya dari jaringan lokal</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>Bolehkan POP3 dan POP3S</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/id/etc/e-smith/web/functions/ibays   2013-01-31 14:31:46.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/id/etc/e-smith/web/functions/ibays    2013-12-24 00:35:05.983219416 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Jalankan konten dinamis (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Force secure connections</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>Hapus information bay</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/it/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.537694463 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/it/etc/e-smith/web/functions/backup   2013-12-24 00:32:26.508353767 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/it/etc/e-smith/web/functions/emailsettings   2013-01-31 14:31:55.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/it/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:54.672173624 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>Abilitato HTTPS (accesso sicuro)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Accesso privato (solo dalle reti locali)</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>Accesso POP3 e POP3S</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/it/etc/e-smith/web/functions/ibays   2008-10-07 09:28:33.000000000 -0600
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/it/etc/e-smith/web/functions/ibays    2013-12-24 00:35:06.182216754 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Esecuzione di contenuti dinamici (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Forza connessioni sicure (HTTPS)</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>Rimuovi i-bay</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.537694463 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/backup   2013-12-24 00:32:26.963347674 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/emailsettings   2013-01-31 14:31:55.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:54.936170090 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>Allow HTTPS (secure)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Allow HTTPS (secure) from local networks</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>Allow both POP3 and POP3S</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/ibays   2013-01-31 14:31:46.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/ja/etc/e-smith/web/functions/ibays    2013-12-24 00:35:06.379214118 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Execution of dynamic content (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>サーバーの設定を復元する</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>Remove information bay</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/nb/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.538694450 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/nb/etc/e-smith/web/functions/backup   2013-12-24 00:32:27.422341532 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/nb/etc/e-smith/web/functions/emailsettings   2013-01-31 14:31:55.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/nb/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:55.203166518 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>Tillat HTTPS(sikker)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Tillat tilgang bare fra det lokale nettverket</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>Tillat både POP3 og POP3S</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/nb/etc/e-smith/web/functions/ibays   2013-01-31 14:31:48.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/nb/etc/e-smith/web/functions/ibays    2013-12-24 00:35:06.577211469 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Kjøring av dynamisk innhold (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Force secure connections</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>Fjerne informasjonsgruppe</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/nl/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.539694437 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/nl/etc/e-smith/web/functions/backup   2013-12-24 00:32:27.879335411 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/nl/etc/e-smith/web/functions/emailsettings   2013-01-31 14:31:55.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/nl/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:55.470162946 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>HTTPS (beveiligd) toestaan</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Alleen toegang accepteren vanaf lokale netwerken</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>Zowel POP3 alsmede POP3S toestaan</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/nl/etc/e-smith/web/functions/ibays   2008-10-07 09:28:34.000000000 -0600
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/nl/etc/e-smith/web/functions/ibays    2013-12-24 00:35:06.776208807 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Uitvoeren van dynamische inhoud (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Forceer beveiligde verbindingen</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>Informatie-baai verwijderen</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/pl/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.540694424 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/pl/etc/e-smith/web/functions/backup   2013-12-24 00:32:28.336329292 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/pl/etc/e-smith/web/functions/emailsettings   2013-01-31 14:31:55.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/pl/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:55.733159424 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>Allow HTTPS (secure)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Allow HTTPS (secure) from local networks</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>Allow both POP3 and POP3S</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/pl/etc/e-smith/web/functions/ibays   2013-01-31 14:31:51.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/pl/etc/e-smith/web/functions/ibays    2013-12-24 00:35:06.976206130 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Uruchamiaj dynamiczną zawartość (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Force secure connections</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>Usuń magazyn informacji</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/pt/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.541694411 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/pt/etc/e-smith/web/functions/backup   2013-12-24 00:32:28.802323055 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/pt/etc/e-smith/web/functions/emailsettings   2013-01-31 14:31:55.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/pt/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:56.001155839 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>Permite HTTPS (seguro)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Permite acesso somente da rede local</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>Permite ambos POP3 e POP3S</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/pt/etc/e-smith/web/functions/ibays   2008-10-07 09:28:35.000000000 -0600
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/pt/etc/e-smith/web/functions/ibays    2013-12-24 00:35:07.173203495 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Conteúdo de execução dinâmica (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Permite conexões SMTP diretas</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>Remover compartilhamento</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/pt-br/etc/e-smith/web/functions/backup       2013-12-24 00:07:08.541694411 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/pt-br/etc/e-smith/web/functions/backup        2013-12-24 00:32:29.255316990 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/pt-br/etc/e-smith/web/functions/emailsettings        2013-01-31 14:31:55.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/pt-br/etc/e-smith/web/functions/emailsettings 2013-12-24 00:33:56.267152280 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>Permitir HTTPS (seguro)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Permite acesso somente da rede local</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>Permitir ambos POP3 e POP3S</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/pt-br/etc/e-smith/web/functions/ibays        2013-12-24 00:07:08.361696752 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/pt-br/etc/e-smith/web/functions/ibays 2013-12-24 00:35:07.370200861 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Conteúdo de execução dinâmica (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Forçar uso de conexões seguras</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>Remover pasta</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/ro/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.542694398 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/ro/etc/e-smith/web/functions/backup   2013-12-24 00:32:29.715310830 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/ro/etc/e-smith/web/functions/emailsettings   2013-01-31 14:31:55.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/ro/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:56.534148708 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>Allow HTTPS (secure)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Allow HTTPS (secure) from local networks</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>Allow both POP3 and POP3S</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/ro/etc/e-smith/web/functions/ibays   2013-12-24 00:07:08.365696700 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/ro/etc/e-smith/web/functions/ibays    2013-12-24 00:35:07.564198261 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Execution of dynamic content (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Permiteți conexiuni directe SMTP</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>Remove information bay</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/ru/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.543694385 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/ru/etc/e-smith/web/functions/backup   2013-12-24 00:32:30.173304700 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/ru/etc/e-smith/web/functions/emailsettings   2013-12-24 00:07:08.373696596 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/ru/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:56.811144998 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>Разрешить HTTPS (безопасно)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Разрешить доступ только из локальных сетей</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>Разрешить POP3 и POP3S</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/ru/etc/e-smith/web/functions/ibays   2013-12-24 00:07:08.374696583 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/ru/etc/e-smith/web/functions/ibays    2013-12-24 00:35:07.758195670 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Выполнение динамического содержимого (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Использовать безопасные соединения</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>Удалить информационный блок</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/sl/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.544694372 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/sl/etc/e-smith/web/functions/backup   2013-12-24 00:32:30.627298622 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/sl/etc/e-smith/web/functions/emailsettings   2013-01-31 14:31:55.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/sl/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:57.079141413 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>Dovoli samo HTTPS (varno)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Dovoli dostop samo s strani lokalnega omrezja</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>Dovoli oboje POP3 in POP3S</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/sl/etc/e-smith/web/functions/ibays   2008-10-07 09:28:34.000000000 -0600
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/sl/etc/e-smith/web/functions/ibays    2013-12-24 00:35:07.953193059 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Izvajanje dinamicnih vsebin (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Force secure connections</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>Odstrani informacijski list</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/sv/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.544694372 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/sv/etc/e-smith/web/functions/backup   2013-12-24 00:32:31.086292477 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/sv/etc/e-smith/web/functions/emailsettings   2013-01-31 14:31:55.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/sv/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:57.348137811 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>Tillåt HTTPS (säker)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Tillåt åtkomst endast från lokalt nätverk</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>Tillåt både POP3 och POP3S</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/sv/etc/e-smith/web/functions/ibays   2013-01-31 14:31:52.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/sv/etc/e-smith/web/functions/ibays    2013-12-24 00:35:08.151190412 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Exekvera dynamiskt innehåll (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Tvinga till säkra anslutningar</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>Radera information bay</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/th/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.545694359 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/th/etc/e-smith/web/functions/backup   2013-12-24 00:32:31.545286332 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/th/etc/e-smith/web/functions/emailsettings   2013-01-31 14:31:55.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/th/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:57.617134212 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>อนุญาต HTTPS (secure)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>ให้เข้าถึงได้เฉพาะจากเครือข่ายท้องถิ่นเท่านั้น</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>อนุญาตทั้ง POP3 และ POP3S</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/th/etc/e-smith/web/functions/ibays   2013-01-31 14:31:50.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/th/etc/e-smith/web/functions/ibays    2013-12-24 00:35:08.348187776 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>การประมวลผลเนื้อหาเว็บชนิด dynamic content (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Force secure connections</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>ลบ information bay</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/tr/etc/e-smith/web/functions/backup  2013-12-24 00:07:08.546694346 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/tr/etc/e-smith/web/functions/backup   2013-12-24 00:32:32.007280145 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/tr/etc/e-smith/web/functions/emailsettings   2013-01-31 14:31:55.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/tr/etc/e-smith/web/functions/emailsettings    2013-12-24 00:33:57.888130585 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>HTTPS için izin ver (güvenli)</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>Sadece yerel ağadan erişime izin ver</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>POP3 ve POP3S için izin ver.</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/tr/etc/e-smith/web/functions/ibays   2013-01-31 14:31:52.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/tr/etc/e-smith/web/functions/ibays    2013-12-24 00:35:08.548185101 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Dinamik içerik yürütmesi (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>Force secure connections</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>i-bay kaldır</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/zh-cn/etc/e-smith/web/functions/backup       2013-12-24 00:07:08.547694333 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/zh-cn/etc/e-smith/web/functions/backup        2013-12-24 00:32:32.466274001 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/zh-cn/etc/e-smith/web/functions/emailsettings        2013-12-24 00:07:08.378696531 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/zh-cn/etc/e-smith/web/functions/emailsettings 2013-12-24 00:33:58.155127014 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>允许https（加密的http）</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>只允许本地网络访问</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>同时允许pop3和pop3s</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/zh-cn/etc/e-smith/web/functions/ibays        2013-01-31 14:31:54.000000000 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/zh-cn/etc/e-smith/web/functions/ibays 2013-12-24 00:35:08.752182369 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>执行动态内容(CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>强制安全连接</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>删除i-bay</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/zh-tw/etc/e-smith/web/functions/backup       2013-12-24 00:07:08.547694333 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/zh-tw/etc/e-smith/web/functions/backup        2013-12-24 00:32:32.982267089 -0700
@@ -9,7 +9,7 @@
   </entry>
   <entry>
    <base>BACKUP_DESC_DAR</base>
-   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share on your LAN or a local removable disk such as a USB disk. You can manage how many rotating sets of backup are kept on the backup share, and also make each set doing incremental backup upon several days. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how compressible the data are. This file can be used to restore the server from the console if you copy it to removable storage media such as a local removable disk.</P> <P>All restore methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
+   <trans><![CDATA[ <P>Three ways are provided to back up and restore your server: using a tape drive, using a network share or a local removable disk, or using your local desktop.</P> <P>Tape Backup. This method uses a software package called <I>$module</I> to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains <b>$dumpsize</b> of data.</P> <P>Workstation backup. This method uses a software package called <I>dar</I> to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately <b>$tarsize</b> uncompressed. Twice the compressed data size must be available on the backup share.</P> <P>Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately <b>$tarsize</b>. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.</P> <P>All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. <b>Ideally, full restore should be performed on a freshly installed server</b>.</P> ]]></trans>
   </entry>
   <entry>
    <base>BACKUP_CONFIG_STATUS</base>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/zh-tw/etc/e-smith/web/functions/emailsettings        2013-12-24 00:07:08.381696492 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/zh-tw/etc/e-smith/web/functions/emailsettings 2013-12-24 00:33:58.421123452 -0700
@@ -139,6 +139,10 @@
         <base>ENABLED_SECURE_ONLY</base>
         <trans>允許https（加密的http）</trans>
     </entry>
+     <entry>
+        <base>ONLY_LOCAL_NETWORK_SSL</base>
+        <trans>僅限區域網路存取</trans>
+    </entry>
     <entry>
         <base>INSECURE_POP3</base>
         <trans>同時允許pop3和pop3s</trans>
--- smeserver-locale-2.4.0/root/etc/e-smith/locale/zh-tw/etc/e-smith/web/functions/ibays        2013-12-24 00:07:08.382696479 -0700
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/zh-tw/etc/e-smith/web/functions/ibays 2013-12-24 00:35:08.949179737 -0700
@@ -35,6 +35,10 @@
         <base>ALLOW_DYNAMIC_CONTENT</base>
         <trans>Execution of dynamic content (CGI, PHP, SSI)</trans>
     </entry>
+       <entry>
+        <base>HTTPS_Only</base>
+        <trans>強制安全連接</trans>
+    </entry>
     <entry>
         <base>REMOVE_TITLE</base>
         <trans>Remove information bay</trans>
--- smeserver-locale-2.4.0/po/fr/server-console.po      2013-12-24 00:07:08.561694151 -0700
+++ smeserver-locale-2.4.0.update/po/fr/server-console.po       2013-12-24 00:37:15.536486645 -0700
@@ -1,9 +1,9 @@
 msgid ""
 msgstr ""
+"Language: fr\n"
 "MIME-Version: 1.0\n"
 "Content-Type: text/plain; charset=UTF-8\n"
 "Content-Transfer-Encoding: 8bit\n"
-"Language: fr\n"
 "Plural-Forms: nplurals=2; plural=(n > 1);\n"
 
 #: root/sbin/e-smith/console:88
@@ -82,7 +82,7 @@
 
 #: root/sbin/e-smith/console-menu-items/manageRAID.pl:129
 msgid "The free and used disk count must equal one."
-msgstr "Le système a besoin d'un disque libre."
+msgstr "Le nombre de disques libre et utilisé doit être égal à un."
 
 #: root/sbin/e-smith/console-menu-items/manageRAID.pl:142
 msgid "There is an unused disk drive in your system. Do you want to add it to the existing RAID array(s)?"
@@ -1141,11 +1141,11 @@
 
 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:122
 msgid "Backup failed. Look at the log files for more details."
-msgstr ""
+msgstr "La sauvegarde a échoué. vérifier le fichier journal pour plus d'informations."
 
 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:122
 msgid "Backup successfully created."
-msgstr "i-bay créée avec succès."
+msgstr "I-bay créée avec succès."
 
 #: root/usr/share/perl5/vendor_perl/esmith/console/perform_backup.pm:137
 msgid "Create Backup to removable media"