--- smeserver-locale-2.4.0/root/etc/e-smith/locale/bg/etc/e-smith/web/functions/backup 2014-12-25 02:06:58.657544678 +0100
+++ smeserver-locale-2.4.0.update/root/etc/e-smith/locale/bg/etc/e-smith/web/functions/backup 2014-12-25 02:24:40.173556155 +0100
@@ -109,7 +109,7 @@
Последния файл, който се съдържа в backup файла трябва да се казва "smbpasswd".
]]> +Bånd backup. Bruger en programpakke ved navn $module til at sikkerhedskopiere hele din disk til bånd hver nat. Det forudsætter en understøttet båndstation og et bånd der ikke er skrivebeskyttet. Sikkerhedskopien udføres automatisk på et fastlagt tidspunkt hver nat (og der sendes automatisk en påmindelse til administrator i løbet af dagen). Aktuelt indeholder din disk $dumpsize af data.
Netværksshare eller flytbart medie. Bruger en programpakke ved navn dar til at sikkerhedskopierere serveropsætning og data til netværksshare eller et lokalt flytbart medie som f.eks. en USB-disk. Du kan indstille antallet af roterende sikkerhedskopier du ønsker at bevare, og antallet af ændringsbackup i hert sæt. Sikkerhedskopien udføres dagligt på det fastsatte tidspunkt. Aktuelt fylder serveropsætning og data $tarsize ukomprimeret. Der skal være plads til det dobbelte af den komprimerede datamængde på backup mediet.
Backup til pc. Denne metode Opretter en kopi af serveropsætning og brugerdata og henter dem til din pc via din web-browser. Aktuelt fylder opsætning og data i alt ca. $tarsize. Sikkerhedskopien vil være lidt mindre afhængig af hvor meget data kan komprimeres. Denne fil kan bruges til gendannelse af serveren fra konsollen, hvis du kopierer filen til et flytbart medie, som f.eks. en USB-disk.
Alle 3 muligheder vil kunne gendanne serveropsætning og data på serveren. Backup til netshare eller flutbart medie kan desuden bruges til at gendannes individuelle filer fra sikkerhedskopien. En fuld gendannelse bør udføres på en nyinstalleret server..
]]>Bånd backup. Bruger en programpakke ved navn $module til at sikkerhedskopiere hele din disk til bånd hver nat. Det forudsætter en understøttet båndstation og et bånd der ikke er skrivebeskyttet. Sikkerhedskopien udføres automatisk på et fastlagt tidspunkt hver nat (og der sendes automatisk en påmindelse til administrator i løbet af dagen). Aktuelt indeholder din disk $dumpsize af data.
Netværkshare eller flytbart medie. Bruger en programpakke ved navn dar til at sikkerhedskopiere serveropsætning og data til netværksshare eller et lokalt flytbart medie som f.eks. en USB-disk. Du kan indstille antallet af roterende sikkerhedskopier du ønsker at bevare, og antallet af ændringsbackup i hvert sæt. Sikkerhedskopien udføres dagligt på det fastsatte tidspunkt. Aktuelt fylder serveropsætning og data $tarsize ukomprimeret. Der skal være plads til det dobbelte af den komprimerede datamængde på backup mediet.
Backup til pc. Denne metode opretter en kopi af serveropsætning og brugerdata og henter dem til din pc via din web-browser. Aktuelt fylder opsætning og data i alt ca. $tarsize. Sikkerhedskopien vil være lidt mindre afhængig af hvor meget data kan komprimeres. Denne fil kan bruges til gendannelse af serveren fra konsollen, hvis du kopierer filen til et flytbart medie, som f.eks. en USB-disk.
Alle 3 muligheder vil kunne gendanne serveropsætning og data på serveren. Backup til netshare eller flytbart medie kan desuden bruges til at gendanne individuelle filer fra sikkerhedskopien. En fuld gendannelse bør udføres på en nyinstalleret server..
]]>Die erste Methode erzeugt eine Kopie der Servereinstellungen sowie der Benutzerdaten und lädt diese über den Webbrowser auf den Arbeitsplatzrechner. Im Moment beträgt die Größe Ihrer Einstellungen und Benutzerdaten ungefähr$tarsize. Die Sicherung wird etwas kleiner als dieser Wert, abhängigwie die Daten komprimierbar sind. Mit \"Überprüfung der Sicherungsdatei\" kann die Datei noch einmal überprüft werden.
Die Bandsicherungmethode benutzt ein Softwarepaket mit dem Namen $module, um die Daten der Festplatte jede Nacht zu sichern. Dafür wird ein Bandsicherungslaufwerk und ein nicht schreibgeschutztes Band benötigt. Die Sicherung wird automatisch zu der angegebenen Zeit durchgeführt, sowie im Laufe des Tages eine E-Mail an den Admin geschickt. Aktuell sind auf Festplatten Ihres Servers $dumpsize an Daten gespeichert.
]]>Die erste Methode erzeugt eine Kopie der Servereinstellungen sowie der Benutzerdaten und lädt diese über den Webbrowser auf den Arbeitsplatzrechner. Im Moment beträgt die Größe Ihrer Einstellungen und Benutzerdaten ungefähr$tarsize. Die Sicherung wird etwas kleiner als dieser Wert, abhängigwie die Daten komprimierbar sind. Mit \"Überprüfung der Sicherungsdatei\" kann die Datei noch einmal überprüft werden.
Die Bandsicherungmethode benutzt ein Softwarepaket mit dem Namen $module, um die Daten der Festplatte jede Nacht zu sichern. Dafür wird ein Bandsicherungslaufwerk und ein nicht schreibgeschutztes Band benötigt. Die Sicherung wird automatisch zu der angegebenen Zeit durchgeführt, sowie im Laufe des Tages eine E-Mail an den Admin geschickt. Aktuell sind auf Festplatten Ihres Servers $dumpsize an Daten gespeichert.
]]>Tape Backup. This method uses a software package called $module to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains $dumpsize of data.
Workstation backup. This method uses a software package called dar to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately $tarsize uncompressed. Twice the compressed data size must be available on the backup share.
Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately $tarsize. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.
All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. Ideally, full restore should be performed on a freshly installed server.
]]>Bandsicherung. Diese Methode verwendet ein Software-Paket namens $module um jede Nacht die gesamte Server-Festplatte auf Band zu sichern. Dies erfordert ein unterstütztes Bandlaufwerk und ein nicht schreibgeschütztes Band. Die Sicherung wird automatisch zur gewählten Zeit in der Nacht durchgeführt (eine Erinnerung wird automatisch während des Tages an den Administrator gemailt). Zur Zeit enthält Ihre Festplatte $dumpsize.
Workstation-Sicherung. Diese Methode verwendet ein Software-Paket namens dar, um Ihre Server-Konfiguration und Daten auf eine Netzwerkfreigabe oder eine lokale Wechselfestplatte (USB-Festplatte) zu sichern. Sie können bestimmen, wie viele rotierende Sätze der Sicherungen aufbewahrt werden und wie viele inkrementelle Sicherungen in jedem Satz enthalten sind. Die Sicherung wird automatisch täglich zu der ausgewählten Zeit durchgeführt. Derzeitige Gesamtgröße der Konfigurationsdateien und Daten unkomprimiert ca. $tarsize. Komprimiert müssen die Daten zweimal auf das Sicherungsmedium passen.
Sicherung auf Arbeitsplatzrechner. Diese Methode erstellt eine Kopie der Serverkonfiguration und Benutzerdaten und lädt diese mit Hilfe des Web-Browsers auf Ihren Arbeitsplatzrechner. Derzeitige Datenmenge ca. $tarsize. Die Sicherungsdatei kann je nach Komprimierungsgrad etwas kleiner sein. Diese Datei kann verwendet werden, um die Serverdaten von der Konsole wiederherstellen, wenn Sie auf eine lokale USB-Festplatte kopiert wird.
Mit allen Sicherungsmethoden können Sie Ihre Konfigurations- und Benutzerdateien wiederherstellen. Die Workstation-Sicherung ermöglicht es individuelle Dateien wiederherzustellen. Im Idealfall kann eine vollständige Rücksicherung auf einem frisch installierten Server durchgeführt werden.
]]>Die Bandsicherung benötigt ein unterstütztes Bandlaufwerk. Eine Warnmeldung wird zum gesetzten Zeitpunkt an den Admin gesendet, sollte das Bandlaufwerk leer sein.
]]>Die Bandsicherung benötigt ein unterstütztes Bandlaufwerk. Sollte das Bandlaufwerk leer sein, wird eine Warnmeldung zum gesetzten Zeitpunkt an den Administrator gesendet.
]]>Vergewissern Sie sich, dass das richtige Band im Bandlaufwerk eingelegt wurde, bevor Sie beginnen.
Nach der Wiederherstellung muss der Server neu gestartet werden.
]]>Vergewissern Sie sich, dass das richtige Band im Bandlaufwerk eingelegt wurde, bevor Sie beginnen.
Nach der Wiederherstellung muss der Server neu gestartet werden.
]]>Die Wiederherstellung sollte auf einem neu installierten Server durchgeführt werden.
Vergewissern Sie sich, daß das richtige Band für die gewünschte Sicherungsdatei im Bandlaufwerk eingelegt wurde, bevor Sie beginnen.
Nach der Wiederherstellung muß der Server neu gestartet werden.
]]>Vergewissern Sie sich, dass das richtige Band eingelegt wurde, bevor Sie beginnen.
Nach der Wiederherstellung muß der Server neu gestartet werden.
Wiederherstellung von: ]]>SME Server ist unter der GNU General Public License frei erhältlich und wird durch die Bemühungen der SME Server Community stetig weiterentwickelt. Trotzdem verursacht es Kosten, den SME Server mit hoher Qualität verfügbar zu machen, z.B. durch Hosting, Server-Hardware, usw.
Daher wird um Spenden zur Finanzierung der Kosten und der Weiterentwicklung gebeten.
Bitte besuchen Sie für eine Spende http://www.smeserver.org/donate/
Diese Software wird ABSOLUT OHNE GARANTIE zur Verfügung gestellt. Bitte schauen Sie sich hier die ausführlichen Support, Garantie und Lizenz Informationen an.
]]>
SME Server ist unter der GNU General Public License frei verfügbar und wird durch die Bemühungen der SME Server Community stetig weiterentwickelt. Allerdings verursacht es Kosten, SME Server mit hoher Qualität verfügbar zu machen, z. B. durch Hosting, Server-Hardware, usw.
Daher wird um Spenden zur Finanzierung der Kosten und Weiterentwicklung gebeten.
a) Wenn Sie eine Schule, eine Kirche, eine gemeinnützige Organisation oder eine Privatperson sind, würden wir uns über einen Beitrag innerhalb Ihres finanziellen Rahmens freuen, der mithilft die Kosten für Hosting, Wartung und Entwicklung zu decken.
b) Wenn Sie ein Unternehmen sind oder im Rahmen Ihrer Tätigkeit Gewinne erzielen, erwarten wir von Ihnen eine angemessene Spende im Einklang mit der Höhe Ihrer Gewinne und der Anzahl der eingesetzten Server. Bitte besuchen Sie für eine Spende
Diese Software wird ABSOLUT OHNE GARANTIE zur Verfügung gestellt. Bitte schauen Sie sich hier die ausführlichen Informationen zu Support, Garantie und Lizenzen an.
Um Funktion des Server-Managers aufzurufen, klicken Sie bitte auf einen der Menüpunkte auf der linken Seite des Bildschirms.
]]>SME Server ist unter der GNU General Public License frei erhältlich und wird durch die Bemühungen der SME Server Community stetig weiterentwickelt. Trotzdem verursacht es Kosten, den SME Server mit hoher Qualität verfügbar zu machen, z.B. durch Hosting, Server-Hardware, usw.
Daher wird um Spenden zur Finanzierung der Kosten und der Weiterentwicklung gebeten.
Bitte besuchen Sie für eine Spende www.smeserver.org
Diese Software wird ABSOLUT OHNE GARANTIE zur Verfügung gestellt. Bitte schauen Sie sich hier die ausführlichen Support, Garantie und Lizenz Informationen an.
]]>
Klicken Sie hier um Funktion des Server-Managers aufzurufen.
]]>Wenn Sie keine Eingabe vornehmen, werden alle verfügbaren Zeilen der Log Datei ausgegeben.
Diese Funktion steht nicht beim Herunterladen von Log Dateien zur Verfügung.
]]>La première méthode crée une copie de la configuration du serveur et des données utilisateur puis les transfère sur votre ordinateur local, via votre navigateur Internet. Actuellement, la taille totale de ces données représente approximativement $tarsize. La taille du fichier de sauvegarde sera légèrement inférieure à ceci, en fonction de la compressibilité de ces données. Ce fichier peut être utilisé pour restaurer votre serveur depuis la console si vous le copiez sur un média de stockage tel qu.un disque amovible.
La méthode de sauvegarde sur bande exploite le programme $module pour sauvegarder quotidiennement l'intégralité du disque dur du serveur. Ceci nécessite l'emploi d'un lecteur/enregistreur de bandes reconnu et d'une bande non protégée en écriture. La sauvegarde est effectuée automatiquement à l'heure sélectionnée (un courriel de rappel est aussi envoyé automatiquement à l'administrateur). Actuellement, la taille totale utilisée sur le disque dur de votre serveur représente approximativement $dumpsize.
La méthode de sauvegarde sur un ordinateur distant exploite le programme dar pour sauvegarder la configuration de votre serveur et les données utilisateur vers un ordinateur sur votre réseau local (ou un disque USB connecté au serveur). Ceci nécessite que vous disposiez d'un partage accessible en écriture (smbfs, cifs, ou nfs) sur l'ordinateur distant ou d'un disque USB sur le serveur. Vous pouvez définir le nombre de jeux de sauvegardes devant être conservés sur le partage, ainsi que la possibilité de créer des jeux de sauvegardes incrémentales sur plusieurs jours. La sauvegarde est effectuée automatiquement à l'heure sélectionnée. Actuellement, les fichiers de configuration et de données représentent approximativement $tarsize non compressés. Le partage de sauvegarde doit offrir deux fois la taille d'une sauvegarde non compressée.
Toutes les méthodes de restauration vous permettent de restaurer la configuration du serveur et des données utilisateur. La sauvegarde sur un ordinateur distant permet de restaurer chaque fichier individuellement. Idéalement, une restauration complète devrait être effectuée sur un serveur nouvellement installé.
]]>La première méthode crée une copie de la configuration du serveur et des données utilisateur puis les transfère sur votre ordinateur local, via votre navigateur Internet. Actuellement, la taille totale de ces données représente approximativement $tarsize. La taille du fichier de sauvegarde sera légèrement inférieure à ceci, en fonction de la compressibilité de ces données. Ce fichier peut être utilisé pour restaurer votre serveur depuis la console si vous le copiez sur un média de stockage tel qu'un disque amovible.
La méthode de sauvegarde sur bande exploite le programme $module pour sauvegarder quotidiennement l'intégralité du disque dur du serveur. Ceci nécessite l'emploi d'un lecteur/enregistreur de bandes reconnu et d'une bande non protégée en écriture. La sauvegarde est effectuée automatiquement à l'heure sélectionnée (un courriel de rappel est aussi envoyé automatiquement à l'administrateur). Actuellement, la taille totale utilisée sur le disque dur de votre serveur représente approximativement $dumpsize.
La méthode de sauvegarde sur un ordinateur distant exploite le programme dar pour sauvegarder la configuration de votre serveur et les données utilisateur vers un ordinateur sur votre réseau local (ou un disque USB connecté au serveur). Ceci nécessite que vous disposiez d'un partage accessible en écriture (smbfs, cifs, ou nfs) sur l'ordinateur distant ou d'un disque USB sur le serveur. Vous pouvez définir le nombre de jeux de sauvegardes devant être conservés sur le partage, ainsi que la possibilité de créer des jeux de sauvegardes incrémentales sur plusieurs jours. La sauvegarde est effectuée automatiquement à l'heure sélectionnée. Actuellement, les fichiers de configuration et de données représentent approximativement $tarsize non compressés. Le partage de sauvegarde doit offrir deux fois la taille d'une sauvegarde non compressée.
Toutes les méthodes de restauration vous permettent de restaurer la configuration du serveur et des données utilisateur. La sauvegarde sur un ordinateur distant permet de restaurer chaque fichier individuellement. Idéalement, une restauration complète devrait être effectuée sur un serveur nouvellement installé.
]]>Tape Backup. This method uses a software package called $module to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains $dumpsize of data.
Workstation backup. This method uses a software package called dar to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately $tarsize uncompressed. Twice the compressed data size must be available on the backup share.
Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately $tarsize. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.
All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. Ideally, full restore should be performed on a freshly installed server.
]]>Backup su nastro. Questo metodo utilizza il software $module per salvare l'intero contenuto del disco su nastro ogni notte. Il metodo richiede una unità nastro supportatta e un nastro non protetto da scrittura. Il backup viene eseguito automaticamente all'ora selezionata ogni notte (con un avviso inviato automaticamente all'amministratore durante la giornata). Attualmente il server contiene $dumpsize di dati.
Workstation backup. Questo metodo usa un software denominato dar per salvare la configurazione del server ed i dati su una condivisione di rete o su un disco rimovibile locale come ad esempio un disco USB. Si può configurare il numero di backup completi da conservare (a rotazione), e quanti backup incrementali eseguire per ogni backup completo conservato. Il backup viene eseguito automaticamente ogni giorno nell'orario selezionato. Attualmente configurazione e dati occupano approssimativamente $tarsize non compressi. Sul dispositivo di backup deve essere disponibile uno spazio libero pari ad almeno il doppio dello spazio occupato dai dati compressi.
Backup su Desktop. Questo metodo crea una copia della configurazione del server e dei dati e la salva sul desktop locale attraverso il browser web. Attualmente configurazione e dati occupano approssimativamente $tarsize. Il file di backup risulterà più piccolo di questa dimensione, in funzione di quanto siano comprimibili i file salvati. Il file può essere utilizzato per ripristinare il server dalla console dopo averlo copiato su un supporto rimovibile locale come un disco USB.
Tutti i metodi di backup consentono il ripristino completo di dati e configurazione. Il backup su workstation consente il ripristino di singoli file. In linea di principio il restore completo va utilizzato su un server di nuova installazione..
]]>Lo SME Server è liberamente disponibile sotto licenza GPL (GNU General Public License) grazie all'impegno della comunità di sviluppatori. Mantenere la qualità dello SME Server comporta diverse spese, tra cui l'hosting, l'hardware dei server, etc.
Chiediamo quindi una piccola donazione per coprire i costi e finanziare lo sviluppo.
Visitate http://www.smeserver.org/donate/ per effettuare una donazione.
Questo software NON HA ALCUNA GARANZIA. Fare clic qui per informazioni dettagliate su supporto, garanzia e licenza.
Per amministrare il sistema, fare clic su uno dei link nel menu alla sinistra dello schermo.
]]>SME Server è liberamente disponibile sotto licenza GPL (GNU General Public License) grazie all'impegno della comunità di sviluppatori. Mantenere la qualità di SME Server comporta diverse spese, tra cui l'hosting, l'hardware dei server, etc.
Chiediamo quindi una piccola donazione per coprire i costi e finanziare lo sviluppo.
a) Se siete una scuola, una chiesa, una organizzazione no-profit o un privato, sarà gradito un contributo per coprire le spese di hosting, manutenzione e sviluppo.
b) Se siete una azienda o un integratore di servizi e distribuite/installate SME per la vostra attività per generare profitto, siete invitati a fare una donazione commisurata al livello di guadagno prodotto ed al numero di server installati. Aiutate il progetto
Il software viene distribuito SENZA ALCUNA GARANZIA. Consultate click here per informazioni complete su assistenza, garanzia e licenza.
Per amministrare il sistema, fare clic su uno dei link nel menu alla sinistra dello schermo.
]]>Tape Backup. This method uses a software package called $module to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains $dumpsize of data.
Workstation backup. This method uses a software package called dar to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately $tarsize uncompressed. Twice the compressed data size must be available on the backup share.
Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately $tarsize. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.
All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. Ideally, full restore should be performed on a freshly installed server.
]]>O primeiro método cria uma cópia da configuração de seu servidor e arquivos de dados dos usuários e permite o download deles para seu micro local via um navegador internet. Atualmente sua configuração e dados totalizam aproximadamente $tarsize. O arquivo de backup será algo menor que isso, dependendo de quão comprimível seus dados forem. Este arquivo pode ser usado para restaurar o servidor a partir da console se voce copiá-lo para uma mídia removível como um disco USB.
O método de backup em fita usa um pacote de software chamado $module para fazer o backup de seu disco rígido inteiro para a fita todas as noites. Isto requer um drive de fita suportado e que a fita não esteja protegida contra gravação. O backup é feito automaticamente no horário selecionado a cada noite (com um lembrete sendo enviado automaticamente por e-mail ao administrador durante o dia). Atualmente seu disco rígido contém $dumpsize de dados.
O método de backup para computador da rede usa um pacote de software chamado dar para fazer o backup da configuração de seu servidor e dos dados para um computador na rede local (ou um disco USB). Isto requer que você forneça um compartilhamento gravável (cifs ou nfs) no micro da rede local ou num disco USB. Você pode gerenciar quantos conjuntos de backup são mantidos no compartilhamento de backup e pode também definir um backup incremental por vários dias. O backup é realizado automaticamente no horário selecionado a cada noite. Atualmente sua configuração e arquivos de dados somam aproximadamente $tarsize (sem comprimir). No compartilhamento de backup deve estar disponível o DOBRO do espaço citado acima.
Todos métodos de restauração permitem que você restaure sua configuração e arquivos de dados dos usuários. O método de backup para micro da rede local permite uma restauração de arquivos individuais. Idealmente um restore completo deveria ser realizado num servidor recém instalado.
]]>O Servidor SME é livremente distribuido sobre a GNU (General Public License) o que somente é possível através dos esforços da comunidade do Servidor SME. Contudo, a disponibilidade e a qualidade do Servidor SME depende de podermos pagar nossas despesas com custos de hospedagem, custo de hardware e outros.
Para tal, lhe pedimos uma pequena doação para diminuir estes custos e ajudar a pagar desenvolvimentos futuros.
Por favor visite http://www.smeserver.org/donate/ para fazer uma doação.
Este software vem sem NENHUMA GARANTIA. Por favor clique aqui para ver informações detalhadas sobre suporte, garantia e licenciamento.
Para realizar uma função administrativa, clique em um dos links no menu na esquerda desta tela.
]]>O Servidor SME é livremente distribuido sobre a GNU (General Public License) o que somente é possível através dos esforços da comunidade do Servidor SME. Contudo, a disponibilidade e a qualidade do Servidor SME depende de podermos pagar nossas despesas com custos de hospedagem, custo de hardware e outros.
Para tal, lhe pedimos uma pequena doação para diminuir estes custos e ajudar a pagar desenvolvimentos futuros.
Por favor visite http://www.smeserver.org/donate/ para fazer uma doação.
Este software vem sem NENHUMA GARANTIA. Por favor clique aqui para ver informações detalhadas sobre suporte, garantia e licenciamento.
Para realizar uma função administrativa, clique em um dos links no menu na esquerda desta tela.
]]>Tape Backup. This method uses a software package called $module to back up your entire hard disk to tape every night. This requires a supported tape drive and a tape that is not write-protected. The backup is performed automatically at the selected time every night (with a reminder automatically e-mailed to the administrator during the day). Currently your hard disk contains $dumpsize of data.
Workstation backup. This method uses a software package called dar to back up your server configuration and data files to a network share or a local removable disk such as a USB disk. You can manage how many rotating sets of backups are kept, and how many incremental backups to have in each set. The backup is performed automatically at the selected time every day. Currently configuration and data files total approximately $tarsize uncompressed. Twice the compressed data size must be available on the backup share.
Backup to Desktop. This method creates a copy of your server configuration and user data files, and downloads it to your local desktop via your web browser. Currently your configuration and data files total approximately $tarsize. The backup file will be somewhat less than this, depending on how much the data can be compressed. This file can be used to restore the server from the console if you copy it to a local removable disk such as a USB disk.
All backup methods allow you to restore your configuration and user data files. Workstation backup provides individual file restore. Ideally, full restore should be performed on a freshly installed server.
]]>磁帶備份。此法使用的軟體套件稱為$module用以每夜備份整顆硬碟到磁帶。這需要支援的磁帶機與非寫入保護的磁帶。此備份自動運作於每夜特定的時間(伴隨著白天寄給管理者的自動提醒電郵)。此時您的硬碟涵蓋$dumpsize的資料。
工作站備份。此法使用的軟體套件稱為dar用以備份您伺服器的設定檔與資料檔到網路分享空間或如同USB碟的可移除式磁碟。您可管理備份的滾動式設定組有多少被保留,以及每個設定組擁有多少增量式備份。此備份自動運作於每日特定的時間。當下您的設定與資料檔案全部接近$tarsize未壓縮量。兩次壓縮數據的大小需在分享空間容量內。
備份到桌機。此法複製您伺服器設定檔與使用者資料,並透過網路瀏覽器下載到您的本地端桌機。當下您的設定與資料檔案全部接近$tarsize。備份資料將稍微小於此量,這是根據有多少資料可被壓縮而來。倘若您複製到本地端可移除式磁碟如USB隨身碟,此檔可透過終端機被用來還原伺服器。
所有的備份方法允許您還原您的設定檔與使用者資料檔。工作站備份提供個別檔案的還原。實際上,完全還原應該運用於新安裝的伺服器。
]]>